RFID Chip Repair Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.49 – €0.60 net (excluding VAT)
For file: chip_armor 2024_0.4n_0.3mm_PLA_MK3S_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.55 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 35.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Whether you're fixing an existing chip or protecting a new one, this case offers convenience and adaptability.
- Rating
- 4.8 / 5
- Likes
- 47
- Downloads
- 592
- Makes
- 8
- Views
- 2,578
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips.
When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative.
If the side cover of your RFID chip falls off, you can use this repair case.
Simply place the cover back onto the chip and insert it into the protective cover. It stays in place without the need for adhesive.
The case securely holds the chip when attached to a keyring.
You can use this case not only for repairing chips but also for protecting new, undamaged chips from potential harm.
For chip diameter 32mm and thickness 4mm.
two extra stripes insert for RFID chip with broken eye part and for round chip
The case can accommodate different chip thicknesses (not limited to 4mm). If your chip has a different thickness, you can adjust the case without complex CAD modeling—just modify the model in one axis using a scale function in SLICER tool.
Tip for adjustment for chip with different thickness.
Example for chip 4,5mm with thickness.
use local coordinate and one axis only to scale case model in corect object by 114 % , scale stripe model in by 112%
