LILYGO T-Display S3 Touch Case ESP32
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a Modified version of the my case designed, made smaller and some features removed to allowed for general use
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 78
- Makes
- 1
- Views
- 663
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Modified my LILYGO T-Display S3 case to be used for General use.
back case allows for installation of 102535 Lipo Battery and can accept upto 102545.
Switch is for a Slider Switch SS-12F15 with 4mm switch height - can be found anywhere.
prints in 2 pieces so nice and easy.
to mount the switch use a soldering iron set to ~120 degrees with a flat tip and squash the pins down to act as a rivet of sorts, didn't want screws to be a requirement. I'm sure you could just as easily use a lighter or hob to heat up some metal to achieve the same thing in the absence of a soldering iron
