ESP32 Bluetooth Mouse für Fusion360 in 2 Versionen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dies ist meine Version einer Bluetoothmouse für Fusion360 Dabei muss Fusion360 auf Inventor gestellt werden
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
ESP32 Bluetooth Maus für Fusion360
Es Gibt 2 Deckelversionen und 2 Drehrädchen.
Die 2 Deckelversion hat beide Tastknöpfe aus dem ESP32 nach außen geführt. Eine seitliche Klappe um das USB Kabel zum Programmieren / Oder Seriell daten bearbeiten . Es gibt auch ein Youtube Video dazu
Gedruckt mit Bambulab P1S Layerhöhe 0.2 Halbe geschwindigkeit .Support Baum Auto Hohl
Verkabelung/Wiring
Siehe Foto
Joystick X=GPIO 36 Y=GPIO39 SW=GPIO17
Rotary CLK=GPIO32 DT=GPIO33 SW=GPIO25
Knöpfe:
Linie = GPIO14 Rechteck=GPIO27 Kreis=GPIO13 Versatz=GPIO12 Extrusion=GPIO18
DrückenZiehen=GPIO19 Projektion=GPIO21 Verschieben=GPIO16
PowerLED=GPIO23
BatteryState=GPIO35 !!!Wichtig über Widerstände !!! ESP kann nur 3,3v durch die Widerstände wird die Spannung bei 100% auf 2,9V herabgesetzt (Funktionert ist aber nicht genau)