Original Prusa Enclosure Mesh Side Boxes for MK4
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.41 – €7.84 net (excluding VAT)
For file: MK4-Sidebox-left-MK4_0.6n_0.2mm_PETG_MK4_5h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.12 excluding VAT (range midpoint).
- Weight reported by the author
- 128 g
- Print time reported by the author
- 5.67 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Updated Original Prusa Enclosure Mesh Side Boxes so that it can now support the MK4 correctly.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 213
- Makes
- 6
- Views
- 1,936
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model supports the MK4 release.
I also updated this model to include a section for optional mounting to the t-slot on the MK4 to prevent the side boxes from shifting inside the enclosure. This also has the added benefit of lifting the boxes slightly off the bottom of the enclosure to account for the screw holes that protrude slightly.