1 / 9
Prusa CORE One Camera enclosure for Wyze Cam v3 — image 1
1 / 9

Prusa CORE One Camera enclosure for Wyze Cam v3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.58 – €3.15 net (excluding VAT)

For file: Prusa Core One Cam Wyze 3-Back_0.6n_0.2mm_ASA_COREONE_1h33m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.86 excluding VAT (range midpoint).

Weight reported by the author
30 g
Print time reported by the author
1.55 hr
Source material
ASA
Estimate material
ASA
Estimate printer
Bambu Lab X1 Carbon - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Enclosure for Wyze Cam v3 to be mounted inside Prusa CORE One in the similar way as Buddy3D Camera.

Rating
5 / 5
Likes
23
Downloads
50
Makes
2
Views
588
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One.

With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process it can be reversed. 

This project was inspired by Prusa CORE One Camera: Internal Wyze V4  and Learn3DP Cam which is designed for Wyze CamV4. I wanted to use specifically Wyze Cam V3 as it can be flashed easily with Thingino and stay completely local.

Printing

  • Material: ASA/ABS or PETG due to high temperature inside the printer + heat coming from the camera itself.
  • Layer: 0.2mm, but others are possible, although not tested.
  • No supports.
  • Brim recommended for the front part.
  • Orientation: Front on its face, back on the flat, triangle side (see the picture).

Camera preparation

Camera needs to be disassembled and stripped to the main board only. This includes microphone, IR LEDs and SD card reader. I found this video helpful. The only really destructive part is to break original enclosure to set free the original micro-USB cable.  It can be also cut and soldered, but I didn't plan to re-use original enclosure anyway.

 

Thingino installation is optional and it's also reversible. Please find instructions in this GitHub repository. It is recommended to install Thingino before camera disassembly.

Assembly

3 15x2mm magnets are needed to attach camera to the Prusa CORE one enclosure. In my case they fit snug enough that no glue was needed. If they are loose please use some CA glue (Super glue).

There is only one way to insert to the camera to the front part. Please route cable inside as in the picture below. Back can be attached also only in one way to fit antenna, cable connector and cable itself.

After that camera should be installed in the front left corner (same as Buddy3D) with cable routed in the same way.

Happy printing!

Tags