1 / 1
Original Prusa Enclosure (OPE) - Vent Hole Slots Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More or less the same model, but only a version for the slots. You have to use Allen screws with this model.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As BuildX has already explained about his model, the slots for a fan in the back panel are quite a hole that should be closed. Especially if you want to print with ABS or ASA, keep the temperature as stable as possible and filter the vapors with the filter add-on.
You need the following parts to mount the cover:
- 4x M3 8 mm Allen screw
- 4x M3 washer (use it under the screw to protect the panel from breaking).
- 4x M3 nut
The model is crated with FreeCAD 0.21.2