1 / 1
Original Prusa Enclosure (OPE) - Vent Hole Slots Cover — zdjęcie 1

Original Prusa Enclosure (OPE) - Vent Hole Slots Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

More or less the same model, but only a version for the slots. You have to use Allen screws with this model.

Ocena
0 / 5
Polubienia
2
Pobrania
26
Wydruki
0
Wyświetlenia
231
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As BuildX has already explained about his model, the slots for a fan in the back panel are quite a hole that should be closed. Especially if you want to print with ABS or ASA, keep the temperature as stable as possible and filter the vapors with the filter add-on.

You need the following parts to mount the cover:

  • 4x M3 8 mm Allen screw
  • 4x M3 washer (use it under the screw to protect the panel from breaking).
  • 4x M3 nut

The model is crated with FreeCAD 0.21.2

Tagi