Voronoi Soap Dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another soap dish. Features an inclined bottom to make any excess water flow out.
- Ocena
- 4,933 / 5
- Polubienia
- 296
- Pobrania
- 2099
- Wydruki
- 35
- Wyświetlenia
- 6029
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yet another soap dish. Features an inclined bottom to make any excess water flow out.
Printing
Material: Doesn't really matter. Go with what you like.
Support: None. The updated shell does not require any support. The original shell (not recommended anymore) does need some support for the lower parts of the fillet.
Infill: No special requirements. Use the minimum amount that is needed to support the top layers.
Perimeters: That's up to your preferences. I personally recommend 3 perimeters to get some durability.
Orientation: I strongly recommend to print the tray upside down. This will give you a much nicer visible surface finish. The shell must be printed bottom down, as it is, obviously.
Changelog
Update 1
As @Faasteer_549552 pointed out in his remix, the overhangs of the rounded edges of the original design are a pain to print. I've added an updated shell where the overhangs are reduced to a maximum of 45°. In my experience that should always print cleanly without support.
Update 2
The tray snaps now into the shell.