Liczymy pasujące modele…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Soap dish inspired by fishbone. Thanks to the fish ribs, the soap does not lie in the water. Easy to print. No supports needed. The dimensions are: 180 x 80 mm (100 %) - fits for classic soap 150 x 60 mm (75 %) - fits for smaller soap
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
A strong and sturdy classical self-draining soap dish designed to be easily printed, without any support, on modern inexpensive 3D Printers. The object can be printed with a variety of material including PLA, PETG, ABS, ASA and other type…
Wydruk około 5,30 €–6,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a pretty basic print of a soap saver based on the Wooden one available from Dr. Squatch. It helps to dry out your bar of soap and extend the life which is very noticeable. After using the soap saver I get 3-4 weeks out of a bar of…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
A Soap Mold with a Smiley Face Inset designed for the home soap maker to mold a bar of soap featuring a smiley face. The mold can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. It can be printed with a…
Wydruk około 4,86 €–5,94 € nettoWstępna wycena jednego wariantu
The idea is simple - just print the 2 parts. The first insert screws into a 20 mm hole that you drill into the top of the empty container. I would recommend to glue it in with some super glue or 5 minute epoxy to secure and seal the fit.…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
A simple soap tray for my Dr Squatch soap Added gcode, just I printed it with Prusament PETG
Wydruk około 3,58 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An exagonal soap box holder with a very satisfactory opening. The unscaled version holds soapsuds up to a diameter of 6 cm. I have been using it for quite some time for both travel and gym. I recommend for printing a very good adhesion to…
Wydruk około 4,03 €–4,93 € nettoWstępna wycena jednego wariantu
Dieser Seifenhalter ist ideal für Seifenstücke, die bis zu 10 cm in der Länge und 6 cm in der Breite messen. Durch die passenden Maße wird sichergestellt, dass die Seife sicher und ordentlich aufbewahrt werden kann, ohne zu viel Platz…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
This soap holder is designed with maximum emphasis on functionality, design and long service life. I publish this model in several file formats including GCODE . Thank you for download.…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
Dish Soap Holders This dish soap holder is designed to hold bottles of dish soap such as Dawn while promoting drainage. This design is also useful for things like mouthwash at bathroom sinks. This helps prevent the dirty build-up that…
Wydruk około 23,91 €–29,22 € nettoWstępna wycena jednego wariantu
Bring a touch of nature into your space with the Monstera Leaf Soap Dish, a perfect blend of organic beauty and functionality. Inspired by the lush monstera plant, this soap dish features elegant curves and signature cutouts that allow…
Soap bar holder that drains on its own
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
Creator:muskokaresearch https://www.thingiverse.com/thing:5352444
This soap dish / soap tray will decorate your bathroom or every other sink! Printing Recommendations: 0.2 mm layer height, supports needed (touching buildplate), 15 % infill. Print from PLA will work fine and support are easy to remove.…
Box for Dr Squatch Soap
The Sox is the ultimate soap travel box! This soap travel case is designed around the soap saver allowing for easy pickup from the shower and quickly turning into a clean and dry case for packing. With strong snaps, the case will never…
Upgrade your bathroom with this modern-designed minimalistic soap holder ! Featuring a sleek rectangular shape, this holder is designed to keep your soap dry and fresh. The integrated drainage slots allow excess water to flow away,…
Introducing the 3D-printed Soap Box, a versatile addition to your bathroom or travel essentials. This meticulously designed box features a hexagonal-patterned soap holder plate, ensuring your soap stays dry and lasts longer. Say goodbye…
This soap dish is big enough to house a full size bar of Dr. Squatch Soap, or similar sized bars. I would recommend printing out of higher temp material such as PETG to prevent chance of warping due to heat and make cleaning easier. For…
This makes the "Refills" of the Sagrotan® / Dettol® No-Touch Soap Dispenser really refillable. I used a 15 mm Forstner Bit on a drill press with a vise to drill the hole into the empty Refill Container. The cap is not watertight, it just…
Since refill cartridges for our soap dispenser are pretty expensive and I didn't like the soap that comes in it, I made this threaded cap. Now we can refill our cartridges with better soap and save money. In order to make a tight seal,…
Has about 1% chance of fitting to someone else's sink so, I have made the f3d project file available. Enjoy :)
Simple soap dish for square Dr. Squatch bar soap. Print the insert with zero top and bottom layers, four walls, and your infill of choice using 10% infill (I used 10% honeycomb infill and changed the infill direction to 0 degrees).
Updated model of my original. Now with smoother corners and better tolerances for the lid.
A fake bar of soap. Nothing more. No functionality. Just a stupid, pointless product. My favorite type of prints! The only use I can think of is for April Fools' Day.
Print stood up vertically, on the longest thin flat side, with the drainage channels pointing upwards. This helps with the curves on this model, so everything comes out looking nice and smooth. Between 0.12 - 0.2mm layer height (I'd…
Update 2-5-2024: Improved rack design. Greatly improved the interlock to join two STLs to make 9, 10 or 11 bar racks. Added handles to the end caps and made them stronger. Also increased the height of the separator columns. Added three…
I've always wanted to find a functional way of using infill patterns. I remixed a hexagonal design to be printable with whatever infill pattern you want (see below for some printing tips). Remix This is based on @Matthew_Ghost's soap dish…
i made a hole in an original detol refill pack with a sharp knife. Then i glued the printed thread together with plastic glue.
I made this to transfer the last bit of soap from a bottle into another one without spilling any. It has a funnel that makes sure none will leak out and holds the bottle tight enough to make sure it doesn't fall out. It also turns out it…
This grill won’t make BBQ, but it will surely keep your soap safe! Best if used for smaller hand soaps but feel free to size the model to your liking. Prints best with sturdy filament such as PLA. Happy printing! :)
Just a simple holder, with Med Command strip Category: Kitchen & Dining
Seifenhalter für die Dusche ----------------------------------------------- Soapholder for the shower
This zombie head looks as if it is vomiting anytime his head is pressed down to dispense soap. He snaps right onto a Softsoap branded antibacterial soap nozzle. Just slide the nozzle tip inside and press the rest of the nozzle into…
This is a 3x2 Gridfinity module with provides storage for three Lather and Wood shaving soap tins to display them nicely in a bathroom drawer. This was made in OpenSCAD and the source file can be found in the files. This OpenSCAD project…
Recently I broke our ceramic soap dispenser from IKEA, and just as I wanted to throw it into the trash, I noticed that the thread on the dispenser mechanism is quite simple and should be easy to recreate in CAD :) After a late night…
A soapholder in shell form to add to your bathroom dekoration and also use it to prevent the soap from soaking in water for too long. Also it ain't slip because the wet soap sticks very good to the mesh and holds a little bit on when it's…
I bought these little powered foaming soap dispensers for my bathrooms, which are great, but I found that if I put them on a counter top they tended to collect grime and water around the bases. To make clean up easier and to prevent this…
Needed somewhere for my Dr. Squatch soap bar so I decided to make one that sticks to the shower wall with the aid of two small command strips. The one shown was printed using 3 walls and 10% infill at .2 layer height
My settings are as follows: Quality Tab: 0.20 layer height- Line Width all set to 0.6- Seam set to Back Strength Tab: 3 wall loops- 6% sparse infill density- Gyroid Support Tab: Tree/auto- top Z Distance 0.275- Bottom Z distance 0.275-…
Verbesserter Seifenhalter mit Schraubenlöchern oder zum Selberbohren.
Resized to my needs, external size 95.5x70x46 (without hinges and locker) Removed internal stiffening ribs Made holes in the bottom Added locker with place for magnets 2.5x5
The perfect soap dish for your hexagonal or round soap. Decorate your bathroom and impress your guests with this fine futuristic looking fixture. Easy to print and scalable to your needs and taste
travel bottle with hopefully no leaks
This soap dish was designed to fit the curve of my bathroom sink. I made two different inserts, with one being a bit more festive for the holiday season. Using the “Octagram Spiral” setting in Prusa Slicer for the top and bottom infill…
Hot on the heels of my Christmas soap dishes, I've got some newly themed soap/sponge trays to add a little fun to your bathroom or kitchen! Stackable soap dish bases, with interchangeable trays to mix and match colors, or just change it…
My wife asked for a soap dish that would hold the soap up, nearly vertical, out of the drippings. She wanted it to be easy to clean and not require a specific orientation with respect to the sink. I looked through literally a thousand…
Simple holder for soap dispenser. If your soap has different dimensions, please feel free to message me! I can adjust the measurements for your soap. I put two pockets in the Holder for 8mm x 2mm Magnets for a better hold. The Magnets:…
We present to CORAV the soap dish/towel, a work of functionality, design and environmental awareness that seeks to inspire hope in the recovery of our precious marine corals. This exquisite piece combines the elegance of Voronoi design…
Update: 31 Jan 2026 added half-size version My brief was to create something to replace a dish that fills with water and soap next to the sink, with something that will drain away and allow the bottles etc to stay dry This prints in two…
EN: This stylish and practical soapbox is the perfect solution for anyone who wants to keep their soap dry, clean, and always within reach. It is great for both home use and travel, protecting the soap from dirt and moisture. Its…
just a remix of the very nice soap box from @Jeancvs_136770
My wife and I recently learned how to make my mom’s designer soap, but we don’t have some of the fancy tools she does. I decided to design my own and started with this chamfer tool or soap beveller. Key features: - The design includes a…
A simple Trivet / Coaster / Untersetzer for the soap dispensers that have the style of a preserving glass jar. (see Amazon Screenshot) The jars came with a flat blue silicone mat, which was flimsy, ugly and didnt fix the jar on its place.…
Remix of @ronguest's "Soap holder for shower caddy" model.
fits three 30 mm soap circles recommended PETG but I use PLA
Description Turn your shower into a DANGER-ZONE (seriously DO NOT take this in the shower) with this nail bed soap dish. The perfect gift for the masochist in your life! This is designed to use wire nails to make a bed of nails for your…
When everything on it s own place, life s good) 1. Wallmounted, so no more pudles under the dispencer 2. Easy installation, 2 screws (max 4mm diameter) and here we are 3. Prints well, no supports, no troubles, just download and print 4.…
simplehuman soap dispenser sleeve and cap -- print in two parts with cap upside down as in stl. The fit is super satisfying! Enjoy. Materials: simpilehuman dispenser affiliate link: https://amzn.to/3Tr6SrO marble PLA affiliate link:…
This soap dish is filled with concrete to make it heavier. This makes it feel more high-grade and keeps it from sliding away. No support needed.
I remixed this shell model into a bracket you can mount on the wall to hold a small dish or bowl. I plan to install this in a beach-themed outdoor bathroom to hold a small soapdish. It's oriented to print on its side, but if you'd prefer…
added a soap dish with mounting/drainage holes. also added a spacer to back to make it sit off the wall a tad
Recommended Settings 0.4 mm nozzle 0.2 mm layer height Notes I used PLA for printing this model I also printed it with 0.6 mm nozzle, it doesn't need to be detailed so higher nozzle size and layer height will reduce print time Top part is…
So another rather minimal soap / sponge holder… I needed one with a specific and rather larger size of the underneath drawer to hold a soap savior (a special request from my family). Bottom drawer size: H 10 x W 85 x L 130 mm Two version:…
I needed the soap holder to be closer to the edge of the sink as my childs arms are not long enough. The suction thingy came from my last trip through the carwash. I added an STL file for reference. Do not print that, it will not adhere…
A simple soap dish that can be mounted on a wall or cabinet using commando strips or stickers. I use this under the kitchen sink to hold the pumice soap that doesn't get used as often. Best if printed on it's side for strength as it's…
Dish Soap, cloth and sponge holder. Cloth holder is removable
My wife loves buying the foaming Bath and Body Works foaming soap dispensers. I always thought the bottles didn't match the theme of our house. I went ahead and made a holder for the dispensers. I have two different versions depending on…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A modular dish for better and cleaner storage of your hard shampoo and shower soap. The files include two different…
A container for a Muji pump dispenser. 67.5 mm x 67.5 mm interior Refill Bottle. Main body is 107.77 mm tall. Size are for the volume. Hole in the bottom for water drainage. I can make some other sizes on demand if people find it useful!
I created these liquid soap holders for my travel trailer to hold the bottle in place while is use and during travel. They are specifically designed for Mrs. Meyers brand bottles. They will work with the 16oz dish soap bottle (2.5" dia)…
Printed in PLA (Color: White) 2 Outer layers 0.2mm layer height 0.4mm nozzle 3 bottom layers 12% infill 3 top layers No part vase mode, cooling fan, supports or raft required
Something i whipped up to fit my specific situation as we have plenty of bottles in our bathroom but not enough space. so now i can store some soap or something up above in the caddy and that also makes cleaning easier for us. Maybe…
Soap/ Sponge Holder + Drip Tray allows for easy drying with a self-draining design and removable honeycomb lid design for easy cleaning. Print Settings: Layer Height - 0.2mm Wall Loops - 3 Infill Density - 15% Support - Auto Tree Printed…
This modern and practical soap dish is designed to keep your bar soap dry, clean, and ready to use. Its decorative look makes it a great addition to any bathroom or kitchen, while the functional design prevents your soap from becoming…
I've had a problem in my bathroom lately with a soap bar. It was making my sink counter very dirty, and sticking to the counter. So that's why I created this fully printable soap bar tray. This easy to clean tray only takes about 100g of…
The part where the tube goes in is in no way connected to the body of the dispenser so please make sure to mark both models if you are going to move them around. The tube itself can be printed upwards as it has a little 12degree curve…
Small minimalist soap dish for my bathroom, inspired by Brutalist architecture. I recommend adding small rubber feet. Matching cups are also published if you are interested ! (They have holes at the bottom to allow water to drain and…
Based on @Cybershaping design, whoch was perfect for me but needed more lengh to be able to fil several sponges. I added a few centimeters to make it 28 cm long.
The most Hand Razors and Standard Soap will fit in the Holder.
A clean, parametric drip tray designed to catch soap drips and keep your sink or countertop dry. This model is fully adjustable to fit round-base soap dispensers of different diameters—just tweak the parameters and print. The shallow tray…
Soap tray with container and grate for awesome airflow. I release this in public domain.
Hot on the heels of my Christmas soap dishes, I've got some newly themed soap/sponge trays to add a little fun to your bathroom or kitchen! Stackable soap dish bases, with interchangeable trays to mix and match colors, or just change it…
Update: 31 Jan 2026 added half-size version My brief was to create something to replace a dish that fills with water and soap next to the sink, with something that will drain away and allow the bottles etc to stay dry This prints in two…
Non era adatto lo spessore per il salisendi così ho deciso di progettarlo e stamparmelo da me.
![The Sox [Rugged Edition]: Compare to Dr. Squatch Soap Saver](https://media.printables.com/media/prints/490204/images/3999308_33587dfe-d030-4dbc-8c58-3bd645c5c1ce/rugged-soap-box.jpg)
