FULL COLOR Ghostface Scream Bath Body Works Soap Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My settings are as follows: Quality Tab: 0.20 layer height- Line Width all set to 0.6- Seam set to Back Strength Tab:
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My settings are as follows:
Quality Tab: 0.20 layer height- Line Width all set to 0.6- Seam set to Back
Strength Tab: 3 wall loops- 6% sparse infill density- Gyroid
Support Tab: Tree/auto- top Z Distance 0.275- Bottom Z distance 0.275- Hollow Base pattern- 3 top interfacing layers
Others Tab: Brim Width 20
If you have the foaming hand soap, Scale the cube to X:2.5in Y-2.25in Z-8in
If you have the regular soap, Scale the cube to X:2.37 Y-1.62 Z-8in
I changed my metrics from mm to inches, so adjust accordingly!
Happy printing!