Liczymy pasujące modele…
I remixed this shell model into a bracket you can mount on the wall to hold a small dish or bowl. I plan to install this in a beach-themed outdoor bathroom to hold a small soapdish. It's oriented to print on its side, but if you'd prefer…
This soap dish can be used as a sponge holder in the kitchen. It can be placed on a plane or hung on the wall with double-sided tape . https://youtu.be/9K\_vXTVIDoE Category: Kitchen & Dining
This soap dish can be used as a sponge holder in the kitchen. It can be placed on a plane or hung on the wall with double-sided tape . https://youtu.be/9K\_vXTVIDoE Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
These are two versions of soap dishes in the style of the Batman logo. Can be used with or without a cup. Only for the fans of Batman. Thank you for every review, like and donation, It motivates and helps to implement new projects!…
I remixed this shell model into a bracket you can mount on the wall to hold a small dish or bowl. I plan to install this in a beach-themed outdoor bathroom to hold a small soapdish. It's oriented to print on its side, but if you'd prefer…
Seifenschale für Dusche. Die Schale ist eine Einhängewand in der Dusche. Dadurch sind die Seifen erheblich trockener. 40mm*129mm*89mm Soap dish for shower. The dish is a hanging wall in the shower. This makes the soaps considerably drier.…
I found this soapdish which was perfect to replace my missing glass one. It fits into a ⌀60mm ring mounted above the sink. I just wanted to add a simple grate so the soap can dry out. Press fit gently into the center of the soapdish and…
A small, stylish soap dish that doesn't stick to soap. If printed with PLA HT, it's also dishwasher safe. A small, stylish soap dish that doesn't stick to soap. If printed with PLA HT, it's also dishwasher safe.
buymeacoffee.com/est_makes_things If you like this model, please consider supporting me! Thank you!!! 😊 ------------------------------------------------------------------------------------------------------------ Couldnt find an oval…
buymeacoffee.com/est_makes_things If you like this model, please consider supporting me! Thank you!!! 😊 ---------------------------------------------------------------------------------------------------- For all ALESTORM fans out…
soap dish with a lotusflower inspired design, now in the renewed and modified version with three little feet water could flow through the holes; there is a small hole for water-drainage into each foot. diameter approx 90mm print with…
My parents have a built-in soap dish in their shower. I believe it's a Taymor 01-102S (no longer available). It's a built-in chrome-plated metal piece with a removable plastic soap dish. For as long as I can remember, the plastic part in…
This is more an additional part rather than a remix for this really cool design by krayvis ! https://www.thingiverse.com/thing:3704406 Due to conversion issues (inch to mm) I scaled his design up and printed it. Then I needed a dish where…
A soapdish for shower rod. The Soapdish are in 2 versions. One is mirrorflipt to best atachment for you. Use 5mm screw with hexhead for the screwHeadHolder. Use 5mm threadrod for bruching opp threads. Se also Showerhead holder:…
This one is closed all the way around, So it can be placed where you want. Does not need any support. Enjoy!
Two types of soapdish: Without place for nametag With place for nametag Room for water to drain thru the bottom. Soap dish can be placed in an included box for traveling. The bottom box also functions as a collector for water from the…
Just a simple soap dish with drain. Print it feet down, needs support but not much
A soap dish with an extended drainage pipe to avoid soap deposits on the top surface of the sink. The clearance between the plate and the base is 0.5mm on each side. In this way, the plate doesn't get stuck because of the thick soap…
The previous model did not stick well to the wall. I had to change the mount. Of course, I understand that not everyone has such a mounting option, but still, I hope it will work for someone. And for someone else perhaps give reason to…
Soapdish that keeps the soap in place and drains on both sides. Holds a standard size UK bar of soap. Print instructions Print on the side to avoid supports. Low in-fill needed Would look good in a wood PLA but I don't have any.
Like and Share...! If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy!
Created this soap dish to catch excess water and soap dripping from Dial liquid soap bottles and staining countertops. Should be big enough for most bars of soap as well. Print with 3 or 4 walls on the base piece at 0.2mm layer height for…
A tool that may save life. Say howdy to a soapdish that is extreme in every way. Great performance, configurable, it was created to let a wide range of makers to push the limits of what is possible while keeping their hands clean. The…
Lush shampoo bar soapdish. I hope you like it. Post-Printing The small hole in the centre should be cleared after printing. Category: Bathroom
Made the dish smaller and adjusted the diameter of the rod to 18 mm. Added step so you can adjust the diameter. It was recovered to parametric witch freecad. You need to use the classic M3 Voron insert. Aliexpress - M3x5x4 (Voron…
Boat Version of this soap dish Prinded on annycubic i3 mega s Category: Bathroom
Soap dish that clips on a 18mm shower pipe. Size: 97mm(l)x55mm(w)x15mm(h) Printed with a ProFab3D mini (rebranded Moniprice select mini) and a glass heated bed. Print Settings Printer Brand Monoprice Printer Select Mini Filament ProFab…
A soap dish in Voronoi design that can be printed in any size by changing the scale.
I liked the original Sponge Holder and SoapDish however, within a day of me putting it by the sink, my wife snapped it. I was worried this may happen with the original design so I added a support strut to the bottom which should, prevent…
Mýdlenka s dírou pro odtok vody. Bez tiskových podpěr. Pokud potřebujete díru na druhé straně, použijte v PrusaSliceru zrcadlení. Velikost lze upravit také v PrusaSliceru. Doporučuji tisknout PLA vrstva 0,15 mm.
maybe the top need support,I'm not idea. I was used support when print the top,it was easy to remove and assemble.
A simple looking soapdish that can be disassembled to be cleaned. Made for custom made soaps. A perfect soapdish for custom made soaps in the following sizes: (Inch) Length: 3.85” Width: 3.25” Thickness: 1” (mm) Length: 97.79 Width: 82.55…
This is a simple soap dish which helps soap bars dry out after they are used and drains away any water.
To avoid the soap to sog on the dish I designed a grid to create separation between soap and base. Given the difficulties to measure the soap dish accurately and the low amount of filament I had left, I also designed a separation ring.…
Designed to fit up to 10x12 cm sized dish washing pads/sponges and allow them to drain into the sink. Suggested settings: PLA+, 0.4mm nozzle 2x walls, 10% infill Print as thin layers as you can bear for a smoother slope - photo is 0.3mm,…
There are 2 threaded parts that allows you to combine colors and dispose drain water in a bottom one. Split them in a slicer into objects before printing. Printer settings: Filament: any except flex Layer: 0.2mm or adaptive for better…
