CAN 'n More - VORON 2.4 Connector Skirt (CNLINKO and EW LP12)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rear skirt for your VORON 2.4 to reliably hookup your external devices, using CNLINKO (and compatible) connectors!
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 5735
- Wydruki
- 0
- Wyświetlenia
- 10 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch? This custom skirt for CNLINKO LP12 (and compatible) connectors might be it!
Why This Mod Exists
We've all been there - hours into a perfect print when some failure just ruins your day 👿. And when it comes to hooking up CAN based MCUs, you definitely do not want these connections to fail at any time. And this skirt mod will have you covered by providing rock-solid, professional-grade connections for all your external CAN devices 🦸.
But it's not just for CAN devices! This mod and the connectors are perfect for filament sensors, exhaust fans, your Nevermore Max, and any other devices that need reliable, professional connections. With up to 8 pins available, you can create custom wiring harnesses for whatever your build requires.
Features
Industrial-Grade Connectors - Designed for CNLINKO LP-12 connectors (also compatible with E-Weichat EW-LP12)
Up to 8 Pin Connections - Perfect for CAN and to daisy-chaining multiple devices
Clean Cable Management - Keeps your CAN cables nicely organized and routed through the skirt
CAD Files Included - Autodesk Fusion project file provided for customization
What You Get
Custom center skirt panel with LP-12 connector mounting
All the variants you need for 250, 300 and 350 sized Vorons
Of course a professional appearance that matches VORON's aesthetic
Reliable connections that won't let you down during long prints
Peace of mind knowing your CAN bus is bulletproof
Print Settings
… just as you print all your VORON parts, no supports needed.
Assembly and BOM
The CNLINKO LP12 sockets come with tiny M2 x 10mm countersunk head bolts. Make sure you fully insert the nut into the skirt and these screw should work also if you opt to use the rubber seal. Worst case: Use M2 x 12mm bolts.
BOM:
Connectors and Sockets: CNLINKO LP12 or E-Weichat EW-LP12
Bolts for blind cover: 4 pcs. M2 x 12mm Countersunk Head Screws