Voron StealthBurner + Orbiter v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Mod allows the use of the Orbiter v2.0 with the Voron StealthBurner
- Ocena
- 4,556 / 5
- Polubienia
- 389
- Pobrania
- 3087
- Wydruki
- 13
- Wyświetlenia
- 26 452
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This mod comprises 2 parts, the Orbiter v2.0 Mount and a slightly revised StealthBurner Front Body.
The front body has some clearance cutouts for the Orbiter filament tension lever and some extra cable management sections for the fans and LED wiring.
I used a Winsinn Blower Fan and after removing the sticker from the back, it fit perfectly with 0.1mm spare.
This mount is designed to use M3 Heat-Insert nuts, just like the rest of the StealthBurner design (except where noted in the Voron instructions).
This mod is compatible with all other standard Voron StealthBurner parts, except the cable chain system. It's mainly intended for use with CanBus - here is my CanBus mount for the EBB36:
https://www.printables.com/model/316984-ebb36-mount-with-cable-strain-relief-for-the-orbit
I recommend printing these in ABS+ or ASA along with the rest of the Voron parts.
Voron StealthBurner Mount for Mega Zero V1 and Ender 3 is now available
CAD file has been included.
My Printer in action with this mod: