Strut Profile Mounts for Optical Breadboards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an assortment of different mounting brackets for 20x20 mm aluminum struts (beam) with 5 mm groove.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an assortment of different mounting brackets for the 20x20 mm aluminum strut (beam) with 5 mm groove, by RS PRO. These were made to create enclosures for optical setups and are therefore made to fit upon optical breadboards with 1/4"-20 or M6x1.0 screws and 1" or 25 mm spacing (C.C). Some brackets come in multiple length to fit different breadboards and there is also an end cap included. So far I've used the commercially made square brackets/joints, but these could of course also be printed. The mounts have slots to fit 5 mm thick optical foam sheets for enclosures. There are two versions of most mounts: flat and edge, where the edge versions are made to be mounted at the edge of the breadboard and the flat version can be mounted wherever.
Some mounts require the use of supports when printing and the Rhino V.6 (.3dm) source files are also included as well as .STP files.