VRS DirectForce Pro controller vertical mount for 4040, 4080 profile or IKEA BEKANT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple "quick mount" for mouting the VRS DFP controller on your simrig or IKEA BEKANT table.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE 2024-04-03:
I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts.
For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer.
Then arrange the printing orientation according to picture. Supports might be needed on the standing part. Other orientations might work also but I did this to have the layer lines between the parts not "interlocking".
Preferably print with 5 perimeters and high infill, PETG.
Note: The M8 version is wider between the screw holes and cannot be mounted vertically on a 4080 profile, only along 1 slot and not across 2 slots.
----
As I had no space for the VRS controller box and to keep weight down from my motion rig I wanted it to be mounted off the rig itself. I designed a vertical mount where the box could mount on my nearby IKEA BEKANT desk leg and easily slide in/out without any tools if needed.
Hardware needed:
- 2x M6x20mm screws
- 2x M6 nut
- 4x M4x10mm screws
Print instructions
Printed in 0.15mm Prusament Orange with no supports.