VRS DirectForce Pro controller vertical mount for 4040, 4080 profile or IKEA BEKANT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
UPDATE 2024-04-03:
I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts.
For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer.
Then arrange the printing orientation according to picture. Supports might be needed on the standing part. Other orientations might work also but I did this to have the layer lines between the parts not "interlocking".
Preferably print with 5 perimeters and high infill, PETG.
Note: The M8 version is wider between the screw holes and cannot be mounted vertically on a 4080 profile, only along 1 slot and not across 2 slots.
----
As I had no space for the VRS controller box and to keep weight down from my motion rig I wanted it to be mounted off the rig itself. I designed a vertical mount where the box could mount on my nearby IKEA BEKANT desk leg and easily slide in/out without any tools if needed.
Hardware needed:
- 2x M6x20mm screws
- 2x M6 nut
- 4x M4x10mm screws
Print instructions
Printed in 0.15mm Prusament Orange with no supports.