Guide PTFE tube Creality k1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade the filament guide for the K1 Creality.
- Ocena
- 4,778 / 5
- Polubienia
- 253
- Pobrania
- 2401
- Wydruki
- 10
- Wyświetlenia
- 11 859
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 16.10.2023 a new version with the direct guide is included to make the job of change filament easy.
Update- 05.12.2023,
i just add a rotative tool for the PTFE guide and two exit for the filament one on the top and one on the side, the hole for the ptfe tube is 4.70mm , i had no issues to put the tube inside but if you feel unable to put the tube or is to tight, let a comment and i will upload it in a big size.
3versions are avaible.
For the old extruder ( with the blue clip on the top).
For the new extruder ( white clip).
for material, use PETG, ABS, ASA, etc… PLA does not support the hot temperatures when the printer is completed closed.
wish everyone a best print and upload your makes! ;D
------------------------------------------------------------------------------------------
.Easy to print and helps alot at the moment of the filament change, it also helps at the underextrusion, the filament goes streight and smooth.
you will need supports, infill i did 40% and no problems.