Guide PTFE tube Creality k1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade the filament guide for the K1 Creality.
- Rating
- 4.778 / 5
- Likes
- 253
- Downloads
- 2,403
- Makes
- 10
- Views
- 11,869
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 16.10.2023 a new version with the direct guide is included to make the job of change filament easy.
Update- 05.12.2023,
i just add a rotative tool for the PTFE guide and two exit for the filament one on the top and one on the side, the hole for the ptfe tube is 4.70mm , i had no issues to put the tube inside but if you feel unable to put the tube or is to tight, let a comment and i will upload it in a big size.
3versions are avaible.
For the old extruder ( with the blue clip on the top).
For the new extruder ( white clip).
for material, use PETG, ABS, ASA, etc… PLA does not support the hot temperatures when the printer is completed closed.
wish everyone a best print and upload your makes! ;D
------------------------------------------------------------------------------------------
.Easy to print and helps alot at the moment of the filament change, it also helps at the underextrusion, the filament goes streight and smooth.
you will need supports, infill i did 40% and no problems.