Liczymy pasujące modele…
This is a very simple piece to make a rounded corner so the ball does not get stuck. There are similar corners that I have printed, but I found them too big and blocking the scoring zone. These corners is easy to attach, does not block…
I needed to orient the camera of my intercom differently so I modeled a new one
A small, fast to print thing that cushions the corners of sharp objects, print in TPU or other flexible materials. Check out my other models! I make fidgets and useful things.
This model allows you to use any 1u 10 inch mounting plate as the cross member in the Labrax 10inch rack. This means a smaller printer can be used and also allows for new mounting options at both the top and bottom angled areas. Total…
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
This model is compatible with the lego system.
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
I wanted to light up my HomeCube with a white LED strip and turn it on and off using a small power switch from the outside of the HomeCube enclosure. Therefore, I modified the original base foot corner so that my switch fits perfectly…
My sister asked me to print these corners for her. I looked around and found a model on Thingiverse. That was great, but I had some trouble printing them, so I took that model and made several changes to print it reliably without support.
Corner bottle dryer for a corner sink. The bars width are 60mm (left) and 70mm (right). Please adjust to match your sink! Mine has a weired joint in the back thats why there is a whole in the model. Main part: Printed standing with tree…
My printer stand is built from extruded aluminium ftubes and plastic corner joiners. All available cheaply at Bunnings. When the printer gets up to speed the while stand sways back and forward. These brackets make a huge difference in…
A Multiboard dual snap that allows you to create 90° corner tile multiboards without using brackets. This minimizes filament use and space required (can be placed on tight corners, walls etc). Also keeps the tiles available for other…
Modern Design Square Tray With Rounded Corners print it in black: it's gonna look nice
I wanted a horizontal mount for the SKR Mini E3 V2 to act as a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display. Printed in PLA using Voron print specifications. Supports…
This bracket can be used to reinforce joints in tables, frames, or other furniture. I printed with PETG. 0.24 layers. 3 walls. 15-25% infill. One side is 7cm long , other 3cm.
Christmas Corner Snowflakes change the layers to change the colour combo, takes ~3hrs to print. Fun piece to give instead of Christmas card.
The Soundboks Gen 2 speaker has hard aluminum corner bumpers, unlike the rubber corner bumpers on the Gen 3 and Gen 4 speakers. These hard bumpers are prone to scratch and dent. This model is designed to add a bit of squishy TPU…
It is 180mm deep and 120mm high but you're welcome to make it your own size I printed it with 15% infill and PLA. It took 2h45min on the Ender 3v3 Plus
I designed this part while building the SICCO Filament Heater/Dryer DIY Project for my Prusa XL 5 Head printer. The project calls for 30x30 aluminum extrusions (black) and requires 3 way corner cubes, which are usually silver, and need to…
Curved corner tray with Honeycomb walls, for utensils, or anything you want to store and have it fit in a corner. No supports needed. resize to your liking.
Corner version of safety razor and oral B IO charger tooth brush.
This design is for anyone looking to ensure your structure doesn't move much during it's use. I don't know for sure HOW much this helps but it does help just slightly and only requires about $4 more of hardware.
Corners easy assembly a light frame for several applications. Green house, 3d printer enclosure, dust protection cover, ect. … NO SUPPORT REQUIRED FOR PRINTING Wooden or aluminium beams 14,5x14,5 mm
Created to connect to a corner cubical framework to hide wiring.
2020 Connector 3 Way Corner Bracket EXTRASTRONG _Alu Profile Suitable for: Resize to adjust dimensions Warning: Dimensional Tolerance Notice Please be advised that final print dimensions can vary due to printer settings, calibration, and…
Jednoduchá rohová konzola s rozmermi 43 x 43 x 43 mm. Rozmer vnutorneho otvoru 8,8 x 22 mm. Ak sa ti model páči klikni na lajk (srdiečko) a keď ho vytlačíš odfoť a daj hviezdičky. Ďakujem. Simple corner bracket with dimensions 43 x 43 x…
To help tidy wiring for external monitors etc on the SV08. This clip simply snaps onto any of the corner pillars and has various sized wire clips that can be attached. Upto two sizes of wires can be attached to each clip. Alternatively…
They are designed for 8 mm thick boards, and add a 4 mm thick base or foot. Could be scaled in Z (or in XYZ) for other thicknesses. The undersides have grooves which are printed first and then bridged. Ensure the first bridging layer runs…
ENGLISH End cap and corner for Ikea Havstorp One end piece, original One end piece, for gluing One Corner You need to print them out as they are aligned. GERMAN Endkappe und Ecke für Ikea Havstorp Ein Endstück ist an das originale Design…
Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…
Dimensions Size: 39x39x36.5 mm^3 Sphere diameter: 35 mm Covers 30 mm of the corner in all axis Print —Tested for Crealty K1 Max w/ standard 0.24mm profile— Filament: Generic ABS—For impact resistance ABS is superior to PLA. Layer Height:…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
This is a top hat for a Voron Trident 300 that I'm calling an Ascot because of the jaunty angle ;-) . This gives extra height for an umbilical setup in the rear yet allows a complete unobstructed view into the chamber while standing in…
Floor trim corners and ends Koncovky pro podlahové lišty SLK50 z Brena
Simple functional Corner Bracket 40x40x40mm with countersunk screw holes. print in place no supports needed. i would love to see your prints
The most stable result is achieved when the model is printed with the chamfer as the base surface. Suggestions for improvement are welcome Das stabilste Ergebnis wird erzielt, wenn das Modell mit der Fase als Grundfläche gedruckt wird.…
A simple decorative corner for a DM screen I made using 0.25" MDF sheets. Made in Tinker Cad.
This sanding block is designed for flat surface sanding as well as two specialized edge profiles for curved and inner corners. It holds sandpaper securely and is ideal for scale modeling, woodworking, and DIY tasks. The ergonomic shape…
Should print without supports. Done some time ago, but if it gets popular i will redo the project with new design ideas. Part of my collection for furniture: https://www.printables.com/@MichaMietlins_755343/collections/3218237
This system is great for photographers, makers, or artists who need a reliable and portable lightbox setup. Add LED strips or diffusion sheets for best results. Features: Designed for wood cleat measuring 20×36 cm Works with 12 wood…
The ZG-204ZM sensor, which supports PIR and mmWave, includes a base with a ball joint that allows for angle adjustment. However, it can only be installed on flat surfaces, and the designs I found online allow corner mounting but sacrifice…
🇹🇷 Kişisel kullanım içindir ✔ | Satış için Patreon'dan lisans alınmalıdır 🔑 🇬🇧 For personal use only ✔ | Commercial use requires a Patreon license 🔑 🌿 Modern and Stylish 3D Printable Vase Collection 🌿 This elegant collection of 3D…
just a simple and effective box corners that you can use to make a custom box only m3 10mm screws needed and only 2 m3 25mm
It’s a connector for ikea skadis, to connect four plates together. Two next to each other and one on top of them also next to each other.
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl this is part of SCROG-system MXG-2 (part 3/3-aditional parts)…
Simply the 5-120mm jig by Bertrand L. cut in half for smaller printers.
This OpenSCAD code is just a few lines that will make a cube with rounded corners. It works very like the ‘cube’ statement. This code is a module so, instead of the call looking like “cube ([123, 234, 345]);”, the call would be “nice_cube…
The model measures 230x208x4mm but can be scaled to suit your printer. Care is needed when scaling the height of the model as colour changes will be affected. The model was printed in PLA filament with a 0.4mm nozzle, layer height of…
Place one Corner Strap Clamp Jig on each corner of a box or frame you are wanting to pull together and tighten it up with a ratchet strap. Print on the flat side with supports touching buildplate. %15 infill is fine no brim or raft needed.
A simple template to create perfect corners with a handheld router.A simple template to create perfect corners with a handheld router.
A set of five reinforced 3D-printable corner brackets designed for strong and precise 90° connections. Each bracket has a unique industrial design with ribs and oval holes for adjustable mounting. Features: Dimensions: 50×50×20 mm Wall…
A small, fast to print thing that cushions the corners of sharp objects, print in TPU or other flexible materials. Check out my other models! I make fidgets and useful things.
You might want to adjust the model to tune the depth of the indent for double sided tape. Put some double sided sticky tape on the square to adhere to the mat.
These are stands that connect to the Top of Snapmaker U1, 4 stands create a base that you can put a low cost Top Cover over it. Feel free to adjust it to match your need. There are 2 files: 1 with 1 stand only. Another is 4x stands for 4…
I created this modular holder for GunplaMark's Ultimate Cereal Filament Drybox, because I never liked the hygrometer hanging on top of the filament exit port (unstable angle against gravity). Instead, this mod allows to put some…
Craft your own custom boxes with square walls and effortless assembly. Don't worry about polarity, use a screw driver to remove and reorient the magnets in the clamp. Mix and match polarities to suit your needs. Print in 45 degree angle…
Put your IKEA STYRBAR or SYMFONISK Remote in a corner. Remix of "Better Ikea Styrbar wall mount" by @pipsel_222257
I have a paltform in my room that has a leading edge trim of 1" outside corner. The wood is not finished (stain or sealant) so I didn't want to use command strips, adhsive, or nails/staples. I designed these clips to be easy to clip on…
This 90° corner clamp is a sturdy L-shaped tool designed for accurate right-angle alignment in woodworking, furniture making, and general workshop applications. The bracket consists of two equal arms forming a 90° angle. Both arms feature…
European market bumper corner protectors for golden era Hondas. Simple model, but I had a set on hand and wanted to give it back. Print in TPU or use to print a mold and pour rubber. Maybe you want to see how they'll look before you shell…
If necessary, scale the model. PLA Print time ~2h45m ~210 g Nozzle: 0.6 mm Layer Height: 0.3 mm Fill Line Width: 0.62 mm Perimeter Generator: Arachne Perimeters: 4 Solid Layers Above: 5 Solid Layers Below: 5 Infill Density: 20% Infill…
31x22x19mm sided corner bracket with central M5 screw hole. Incredibly strong Category: DIY
https://freeantennas.com/projects/Ez-10/index.html In the tradition of Freeantennas.Com, I've uploaded a Corner Reflector which should fit most antennas found on most Wifi Access points. I've also included the OpenScad source code so you…
This is a remix of the original corner mount for Valve Index base station, since the newer mounts are smaller in size and the screw holes are now symetrical in relation to the mounting plate. Same as with the original design, no supports…
Modular Corner Shelf System Turn unused corners into serious storage. Stop wasting corner space. This modular corner shelf system lets you build clean, strong, and fully customizable storage exactly the way you need it. Print one level —…
.4 nozzle. .2 layer height. Default settings. Bracket and filament guides must be printed on the side with the thin edge facing up like in the photo. The edge printing for the guide has the bonus of making the print stronger and have less…
A small cube is printed on the edge of the print sheets to prevent the top of the model from melting.
This is the GridQuest Corner Tile Base size: 3 fields Game size: 4x8 + 4x4 fields Available in TWO versions (with/without optional magnets of size 5x3 or 5x2mm) This bases size has 5 fields to create longer corridors or rectangle rooms in…
This is the GridQuest Corner Tile (seamless) SEAMLESS bases & tiles are perfect to create LARGE jointless rooms where the tiles match on an bigger surface to place large objects like in throne romes, wine cellars and others. Base size: 3…
For the storage of the print sheets I upgraded my CoreOne+ with " Crushed legs with expandable support for multiple steel sheets for Core One ". I did not like the idea of it just sitting on top of INBXX , so I designed the corner plates…
Model Created in OnShape. You can modify or create a derivative work using the link below.…
A set of printed corner radius gages to help with reverse engineering shapes. 1-24mm Radius
Corner Conversion Pieces – Designed to turn standard honeycomb panels into a functional corner layout. Attaches from the back. Interlocking Corner Fillers – Fills gaps and creates a clean, continuous honeycomb pattern Bordered 211x248…
Larger, alternating tabs A looser battery fit A perfect fit for nickel metal grids Note: Print two pieces and test the fit. Be sure to check the comments—some users report a perfect fit, while others find it too loose. Resize for perfect…
Qbrick System - 10mm and 12mm plywood workbench corners. The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue. I printed them with TPU to make them soft. The 3mf file is from Qidi…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
I was looking for a way to put my small household plants up on the wall. Couldn't find anything I liked so made this. As you can see, depending on your viewing angle, these almost create a floating effect. Hope you find a use for it.…
For use with my magnet corners. holds down the table cloth.
This wall mount was entirely made with Prusa Slicer. It points downward to enable to set the the solar screen at a more appropriate angel compared to using the mount that comes with the camera. When using this angled mount, the camera can…
Perfect corner holder without making any holes in the walls. Worked great for my camera Tapo C210. Command Strips used: https://www.walmart.com/ip/1067835279?sid=a4ff3eb0-c9ab-474d-9785-e8be311f9e76
Due to occasional variance in ply thickness i would sometime just wedge a 1mm window packer in the back which pinches it tight, whilst i brad nail the corners together after applying glue
Drop in Corner Mount for Aqara FP300 Hex cutouts in the back reduce resin required by ~20%
.4 nozzle. .2 layer height. Default print settings. There were a couple remixes of the top that fixed problems so I combined them and added my own fix. @zktec_3322325 fixed the entire top for better stacking but changed the top to a…
When we had our bathroom remodeled, the contractor refused to mount the corner shelves in the shower because they “didn’t have the right glue.” That led me to try to solve a problem that has plagued DIYers forever: how to mount a heavy…
This is a set of Corner Radius templates from 100MM - 200MM. This set is designed to be used with 3/4" wood. Works great if you have a router but can be done manually with a Jig Saw / Scroll saw but with a bit more finish work. May add a…
