Bathroom corner shelf - No drilling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple shelf for the corner of you shower to be able to keep your neccesities close to hand. Easy to mount and no screws
- Ocena
- 4,938 / 5
- Polubienia
- 391
- Pobrania
- 1071
- Wydruki
- 16
- Wyświetlenia
- 8066
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating.
There are three files, the main shelf, mounting bracket which you need two of, and a guide to help you attach the brackets in a correct position.
I have designed them to use Tesa powerbond ultra strong double sided tape
Instructions
Here are some brief instructions to help you with your new shelf :)
Print:
1x shelf
2x brackets
1x Guide for brackets (optional but recommended)
Printinstructions:
Layerheight: 0.2
Infill: 20% (would suggest using modifier and have extra infill in the front)
Parameters: 4
PLA or PETG
Assembly:
- Cut the double-sided tape the the correct length and attach them in the small cutout in the bracket.
- place the guide against your corner and make sure it is level. Then you place the brackets in the guide and make sure they're in the correct place.
- Slide the shelf onto the brackets.
- Done!