Liczymy pasujące modele…
This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix of the Mushroom-themed Print-in-Place Twisty Puzzle Box turns it into a simple twist lid container. https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts print without supports Consider…
Wydruk około 13,09 €–16,00 € nettoWstępna wycena jednego wariantu
This is a really simple Keycap - compatible with Cherry MX and many clones which share the same dimensions.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
New version with hidden screws HERE . New dual version HERE . Simple hook that is strong and quick and easy to print. There is no support needed for this print. The hook can be installed using two small screws. Support If you'd like to…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple model(1:18) kit card of Golf GTI mk1 with twin headlights. It's not a completely accurate model, it's more of a puzzle. The recommended material for printing this model is PET-G, but it is not a condition. Good adhesion to the bed…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…
Wydruk około 3,58 €–4,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I would love to see everybody's remixes. The inside diameter is: 20mm The outside diameter is: 25mm I've uploaded the FreeCad file so its easier for you to edit the ring size. Print settings: I wouldn't recommend Prusa slicer for this…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
VERSION 2.8 UPDATES: Added two new covers which have the digit market tiled 1 over, just print one of each of the left and right versions and follow assembly as normal! (Thanks to prusaprinters user Hellfish for the suggestion) This is a…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
I made this quick and easy USB Case to use and remix it into way more interresting Cases. I used this USB Sticks from Amazon because it is a widespread model and easy to take apart. I look forward to see your remixes and will add some…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This is a simpel modern looking bracket for angled (15°) furniture legs. This model in particular fits 30mm round wood rods. Tho, keep in mind due to filament shrinkage while printing and manufacturing tolerance of your chosen leg…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
This pen uses its own stiffness to grab on a 2,8mm lead (also used by Pica pencils see here: https://www.pica-marker.com/en/pen/pica-dry ) The lead is simply inserted from the tip wile pressing on the walls adjacent to the cutout on the…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
I needed a simple table to help my kids to learn multiplication. Sure. You can just print it on a paper, but what a nerd would I be. So i've made a 3d-printed one. Print instructions Material: Any (PETG in my case) Resolution: 0.2mm…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
The scarecrow is powered by the wind and scares away birds and moles in the garden or just birds from the balcony. This scarecrow produces a slight vibrations that are transmitted in the ground and these vibrations scare the moles away.…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable Organizer for USB and other IT/computer Cables. Designed with a focus to optimize and reduce filament demand to the max. Very lean version for rapid an easy print. Easy to print with PLA or other remaining filament which is…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
If you need a simple to print and easy to fit pipe cover, this might be what you are looking for. The hole is set to fit 15mm pipes. CAD (fusion360) file is included to allow you to customise. Print two to create a single pipe cover - For…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you need a simple to print and easy to fit pipe cover and want a parametric CAD file as well, this might be what you are looking for. I have made this CAD design (Fusion360) parametric for easier adjustment, such as hole size - plate…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
During designing something else i have realized that this is good simple cable clamp :) It is fast and super easy to print. You can scale it to any size in the slicer. Even you can deform it to be eliptic and catch a smaller bundle of…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro A really simple 3D-printed organizer for keeping your zip ties (cable ties) neat, accessible, and tangle-free. This holder lets you slide ties onto it so they stay in one place — perfect for workbenches, toolboxes, drawers, or cable…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This PSVR holder fits perfect and you will not see it when the VR is on the holder. Its simple for people that doesnt want any complicated constructions and their only goal is to hang the VR on the wall. You dont have to worry about it…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…
Wydruk około 3,77 €–4,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this collection for the cerealbox i use ( Link ) A scound reason for this was, that i hadn't found a good drybox with a easy and robust rewind function so i had to create this. A third reason for this was, that all the dryboxes…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
inspired by an old set of tokens I had found on this site. https://www.thingiverse.com/thing:2591952 I found that the readability was not that great on some numbers. I decided to make a simple token with easier readability as well as…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Eine Zettelbox in drei verschiedenen Größen (60 mm, 90 mm, 120 mm) für Zettelblöcke 90 x 90 mm. Print instructions Printed on Prusa i3 MK3S Layer height 0.20 mm Infill 15% No supports, no brim
Wydruk około 5,26 €–6,43 € nettoWstępna wycena jednego wariantu
I printed with a 0.4 nozzle, 0.2 layer height, 5 perimeters and 30% infill. No supports needed.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
This is a simple Post-It Notes Tray for 3" by 3" post-it notes. I created it to organize my own “to-do” notes, but it can also be used to hold stacks of unused post-it notes! It's made with Prusament Galaxy Black PLA - though any type of…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Simple Automatic Nozzle Cleaner If you have some out-of-print area on your print-bed then a very simple automatic Nozzle Cleaner solution is presented here for you. An out-of-print area, is an area, which normally will not be visited by…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
A simple whiffle ball I made for my robotics club. print with simple supports touching the baseplate. if you are competing in the Robolink Aerial Drone Competition, scale the ball down to 90% size to get the same mass as the balls used in…
Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu
A simple soap tray for my Dr Squatch soap Added gcode, just I printed it with Prusament PETG
Wydruk około 3,58 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Initially designed for anti-insect essential oil diffuser ( https://www.printables.com/model/124634-octagonal-boxes-for-anti-insect-essential-oil-diff ), I redesign the model to create several boxes with different sizes and make them…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Simple Nested Cubes, a stunning geometric sculpture crafted in a "print in place" design. With dimensions of 75x75x75 mm, this model is…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
This model consists of a 13 cm long ruler and a protractor. It takes less than 2 hours to print. It can be printed without supports. It doesn't matter, which printing quality you are using. It also doesn't matter, which printing material…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
one colour - Wait untill it cool down completely first.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
/!\ This is a Project, work in progres /!\ This is the V2: extra arm on top to secure the position of the filament after docking. increases the reliability. By printing this set of part and adding the special toolchange Gcode in your…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Dice with Dots.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Discussions regarding fillament jams lead me to draw and print a really very simple fillament movement senzor. Bondtech gear movement indicator in the fillament jam situation does not show you, whether the fillament moves, the fillament…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Fast and simple easy to print. A print-in-place plain and simple small mini Ball Pen Cup. Settings Value Infill 5% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none / organic Comments…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Simple case for the EspoTek Labrador Board. You can still use it on a breadboard. See projectpage for detailed description of the EspoTek Labrador Project. LINK Software etc.: https://github.com/espotek/labrador
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Hook width:5 types 9mm,19mm,29mm,39mm,49mm ziptie size : max wide 5mm height 3mm
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Ein einfaches Dekodierrad für die Caeser-Verschlüssselung
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
it is an easy printable rocet engyne modell it can be instald to a rocket body or can be plased anywhere. it is also contains g code modell to
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
I would recommend printing this in PETG to better withstand the outdoor conditions. I've included a print file for the MK3S+ which has the two color filament change setup.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple cheap Bowden extruder. This extruder was designed for a DIY 3D printer school project. The extruder can also be used on the Creality Ender 3. The components used were selected based on availability and price in Europe. Einfacher…
Wydruk około 3,59 €–4,39 € nettoWstępna wycena jednego wariantu
This Simple (smooth) Version is easier to assemble and print. This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Display holder for 25 strands of 1.75mm filaments. Print instructions 0.2mm layer height No supports print in 2 colors, ideal black and white for better contrast Typs and tricks If 25 samples is not enough. Model is stackable! When in…
Wydruk około 2,46 €–3,00 € nettoWstępna wycena jednego wariantu
After third time trying several tools and nearly breaking my fingers when I was mounting a nut I printed this simple flat tool that holds the nut securely and is flat enough to reach into the tight space. - Models for M4, M5 and M6.…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While wrapping up projectile motion, I wanted a simple target to put on the ground and have students calculate where to put it in order to hit the target with their projectile launchers. This is what I came up with, with three different…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is not a complex model. This is a short homage to living in a world where you can design, print, and use objects faster than going out shopping. This piece, which is very simple, represents what it means to live with a #D Prusa…
Wydruk około 4,85 €–5,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Honeycomb Mobile Stand Consists of two parts that you can optionally print in different colors. The stand offers two settings – depending on how you insert the parts together, you can adjust the angle of the stand. Charge your…
Bau einer sehr einfachen und günstigen Filament Trockenbox für rund 10€. Gebaut aus einer Vorratsbox und ein paar Teilen aus dem 3D-Drucker. how to build a very simple and inexpensive filament dry box for around €10. Built from a storage…
UPDATE: If you are printing with Silk PLA or have issues with the pin breaking during assembly please use the "flat pin" file for a stronger print orientation. UPDATE: License changed to allow commercial use, please credit my design if…
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The width is defined by spacers which are put under the blade. The PET strip can be then used in machine which converts it to filament for 3D…
This is a three part sanding block, made to be very easy to put together. Scale as you like, but be wary when scaling down, the bolt may need more clearance. At 100% scale needs about 19cm of sandpaper. Recommended settings (best to use…
I created this tray set for the printables catch-all contest (01/2023). The goal was to get away from the usual box shape and right angles and offer a nice place for your belongings. These trays resemble presenting plates in irregular…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…
I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
Heyho :) Here is a tensioning device for the belt of the Y-axe. I have tested at least 4 different designs myself but was never really satisfied. Either the designs were too clunky, not nice to print, you had to drill holes or the…
Full set of basic / simple rings in all sizes. FreeCAD models included if you wish to make your own additions. Ring size in the file names are in US / Canada sizes, and a conversion chart has been included for international size. If…
Simplified model of barbie (doll) chair for Barbie house or Barbie caravan. From PrusaSlicer 2.4 turn on Thick bridges (old mode bridging) for better results. Material: PLA Nozzle: 0,4 mm Support: no Brim: yes (5 mm)
This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case. Update: A few printers have expressed that the threads are tight. Be aware, depending on your print settings, you may…
This is a simple mechanical start gate for HotWheels / Diecast 1/64 cars. Designed by PlayRobotics. This gate is really simple to print and assemble. In addition to the printed parts you will only need two M3 screws (20mm & 12mm long).…
Car headrest cup holder. Made for standard 33cl drink cans. (The inner diameter of the cup holder is Ø70mm) For a shaft of Ø12mm (The hole is Ø12.25mm) Distance from the center of the hole to the inside of the hook. View the image below.
You find english below! Deutsch: Als erstes ist es wichitg zu sagen, dass ich weder das Modell, noch die Methode entwickelt habe. Bei einigen Projekten habe ich gemerkt wie umständlich das Einstellen des Retracts ist. Ich habe mir ehrlich…
Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all? No more shall your headphones be treated with such disrespect! Treat them right…
This is a simple EV Charging cable holder for easy storage of your Type 2 Cable. Fits perfect for small areas. It's an easy print without supports. Just lay flat on the print surface and you're good to go. Use many wall lines for best…
Makita simple logo in 3D. 5mm high.
Split so you can do different colors. Use the New Longer Knob for Multicolor. The New Knob with Color Arrows is the shorted one for the original base print. 04.21.2024 update. Added a new Knob with different tolerances for the arrows. If…
I love the belted Z of the Simplecore, however, with the stock direct drive setup, the bed tends to drop like a rock, especially for larger builds when motor power is cut. To fix this, I've designed new motor mounts that add a 4:1 gear…
Simple 3M command hook. Small and medium sizes for the small and medium sized command strips. Any material can be used. PETG recommended due to increased toughness No supports needed Category: Household
Just a simple peg board hook. I designed it to hold paint sample speed shapes, but it works great for all kinds of other things. Easily strong enough to hold heavy tools. Print them on their side at 100% infill. Recommened to use…
Always make sure you are using high quality eye protection and ventilation while working with lasers. Eye protection is very important! https://github.com/Adamslab/SimpleEngraver This is a 3D printable frame for a simple 2-axis laser…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
This model fits a small command strip, I originally designed it to hand a shower curtain from, so it also fits those holes.
It holds your iphone 15 Pro (Adjustable for others too) in place via the magnetic charger. Due to the iphones function to display a clock-screen while charging, this stand also makes for a nice tableclock. The phone is released by simply…
Download version 1.5.4 or 1.5.6 of the RTCLib library on github (link can be found as a comment in the Arduino file of this project) since there is a bug in 1.5.5 for the time being. It all started with the simple conclusion that I was…
This is a very easy and simple clip on accessory for DJI Osmo Pocket 3. It adds a cold-shoe mount without adding much bulk. It maintains all functions and other attachments for your Pocket3. The gaps between all moving parts are 0.3mm. I…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
.2 layer height, with supports, and fuzzy skin on the rollers 1 - 2 3/8 strip of vinyl or similar material long enough to wrap the rollers wih ends sewn together. 1 - MELIFE 4 pcs TT Motor DC Gearbox Motor Dual Shaft 200RPM DC 3-6V Gear…
This minimalist half sphere design showcases the essence of geometric simplicity. Perfect for various uses, including as a decorative piece, a base for further customizations, or for educational purposes in 3D design learning . Its clean,…
This minimalist doorstop is designed to fit under most standard doors and hold them in place. It features a wedge-shaped design for easy use and a stable hold on flat surfaces like wood, tile, or laminate. Note: This model does not…
I needed to hold larger sized paper so I made this bigger. That's all. Thanks to the original creator of the file! Print Settings Printer: Anycubic Kobra Rafts: No Supports: No Resolution: .03 Infill: 20 Filament: TPoimin PETG Clear…
Designed with using firmware retraction in mind. Tested with 0.4 and 0.6mm nozzles at layer hights up to 0.4mm. If a smaller nozzle is used, scaling it may be an option. First picture shows the default dimensions and distances, second…
This is a super simple filament presence and jam sensor. Sensing filament is simple, and is often done with just a simple microswitch. However, many spools of filament have an annoying kink at the end of the roll where the filament is…
Simple Buddy3D Camera frame mount bracket for the Prusa I3 printers. Fits the standard aluminum frame without any tools or fasteners. It utilizes the standard mounting plate you get with your Buddy3d camera. You can freely move the…
Nothing against Mason jars… we just didn't have one on hand. Decided to just create a printable one using FreeCAD and see how it turned out in clear PETG. I printed in vase mode with 0.4mm nozzle, 0.8mm line width, 0.3mm layer height…
This model is ideal for keeping all your money organized at home and facilitating savings for future necessary purchases. It's excellent, especially if you have trouble losing money or don't know where to securely store it. Additionally,…
Fits into a normal Dummy13 V1.0 into the same back slot as the backpack. Orient it with the nozzle-end of the rocket sitting on the print surface. Use supports. Optional: .15mm layer height Color change on layer 33 and 167. I also put…
Just a simple Turbine Blade made as a replacement for a freinds Aircraft Model.
I am going on a trip soon and wanted a simple grip that I could use with my DJI Osmo Pocket 3, and I couldn't find one. So, I went ahead and made one using parts from other models I found along the way (linked at the bottom). This grip…
Simple squares to hold 18mm furniture boards square while screwing. Snug fit. The jig itself can't be clamped, for glue-works can't be used on its own.
