Tapo C100 Corner Mount Original Prusa Enclosure - Updated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Tapo C100 to the inside corner of the Original Prusa Enclosure
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 466
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit the design on Tinkercad: https://www.tinkercad.com/things/1YN41pa0s86-tapo-c100-mount-for-original-prusa-enclosure
You may find that there are some errors when opened in Prusa Slicer that originated from the original model I remixed, but it will print just fine. I'll work on fixing those errors and upload a new STL when I'm done. I've included gcode for the MK4 using .2mm QUALITY settings in PETG.
Update 23 APR 2024: I made the screw hole smaller and added a shorter version of the mount.