Liczymy pasujące modele…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
GoPro mount for TP-Link Tapo C100/C110 IP camera Print instructions Category: Camera Summary GoPro mount for TP-Link Tapo C100/C110 IP camera Print Settings Printer: Prusa MINI Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
Replacement base for TP-Link Tapo C100/C110 Cameras. I got a good deal on several of these cameras, but they were missing the bases, so I designed and printed some. I used Polymaker Polyterra PLA Cotton White just because it's matte and…
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
For the right-hand side of printer. May work on the left if you mirror the stl in your slicer before printing.
Flashforge Adventurer 5M Mount for the TP-Link Tapo C100, C110, C101 Camera. I made this one as there was no way to put my C101 inside the enclosure, and I didn't want it attached to the door. This mount is designed to work even with a…
I used that case for filament dryer Need: 3x screw and nut M4 https://aliexpress.ru/item/32431995668.html Set2
The camera for the P1P and P1S is mostly useless and is more of a time lapse still camera than a video camera, this allows you to use a tapo C100 for a real time camera and still keep the built in camera. It mounts on the glass for the…
As I wanted the base in a different color than white, I made this from the original model. This model use the same distance for the screw holes as the TP-Link original mount. I made 2 versions with different tolerances, as the original…
The perfect camera mount for the Snapmaker U1 leveraging the mounting point for the U1s tophat. Since the mount is rubberized it also provides some vibration protection. Tapo C110 (2k) - https://amzn.to/3M1R4Lc Tapo C100 (1080p) -…
This Case is to safe your Tapo C100 Indoor Webcam from Dust and Rain. The picture is from another Reddit user, because i forgot to take a picture of my model when i uploaded it. I already asked him if i could get the Stl but he didnt…
Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.
Housing for a REX-C100 Temperature Controller with switches to shutdown the controller or interrupt the SSR relay, while keeping the controller running. Rear is cutout for a housing Schuko socket from PCE, 20mm opening for a cable gland…
A simple weatherproof enclosure for the TPLink Tapo C100/C110 WiFi security camera. I made this so I can watch the various neighborhood cats come in and out of our yard and to check on Meggy, the feral cat that we look after, who this…
Wings to be able to mount a Cisco C1000 into a standard 19" rack. I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic…
This is a slim shell to fit the internals of the Tapo C100 camera (except the speaker). The idea is to be able to fit it in narrower spaces. All faces are flat so would be easier to make different mounts for it, e.g. for 3d printer, etc.…
As it can be to thin for your tastes, do not hesitate to remix it with thicker walls ! And to be sure that the PID will stay in place, I placed two bands of “unfolded”vdouble sided tape between the PID and the support. Used this model for…
Remixed from: https://www.prusaprinters.org/prints/45286-tp-link-tapo-c100-mount https://www.thingiverse.com/thing:3987496
I added two holes to screw it against the wall and I also removed the holes for the rubber feets Printed with: 4 Walls 20% infill (Grid)
Really liked the looks of capze 's design, but needed a way to securely and universally mount the camera to any current and future projects, and felt like it could be even thinner. The original STL was hard to make precise changes too, so…
UPDATE 24.11.2023 Added a second version of the model with stronger, tighter fit and that now uses 2 of the V-Slots. This way you can put more pressure on the camera (for example when orienting it) without it coming free of the rail.…
Print Instructions & Recommendations: No support or any other post processing is needed with current orientation . 3MF file prepared in PrusaSlicer is also included. Assembly Instructions: No additional material is needed for the…
Update: added a M3 version which will fit screws from M3 x 6 to M3 x 10. Make sure to not tighten the screws all the way as this may brake the pillar on the bottom lid and isn't even necessary. Hello there! I was looking for a simple…
I've been looking around for a mount for my tapo cameras and I wasn't quite finding what I was looking for, so I'm going to be building my own. I also couldn't find any specs on the dimensions of the mounting holes on the base of the…
3D scan of the TP-Link Tapo C100 security camera. I took this in order to help design a mount that attaches to the front of the camera. The lens had to be covered in tape in order for the scanner to work correctly but the rest of the scan…
For C100 and C110
A simple mount that adds magnets to the base of a Tapo C100 or C110 camera. The pegs on this mount fit into the mounting holes on the base of the camera, and the other side of the mount is sized for a 10mm x 3mm circular magnet . I put a…
For c100 and c110
This mount is made for the TP-Link Tapo C100/110 camera in combination with a Creality Ender 3V2 3D-Printer. The mount is screwed with two M5 screws onto the existing y-axis belt tensioner. You will need to swap the original screws, which…
Cover to hide the white parts of the Tapo C100. Print without support. You may need to orient the parts properly. The parts should be press fit. No glue needed.
Bird feeder with insert to add a Tapo C100 camera Print with support for camera support and main feeder. M3 screw is used for assembly. I use Frigate to analyse the camera flow and detect birds.
Find out everything you need to know about the STC controller on my blog: https://nerd-corner.com/stc-3000-with-user-manual/ https://nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/ 3D-Model STC3008 from…
2024.06.01 update V2 - Better socket for camera. Really liked the original model, but i have Tapo Cameras at home, so i modified the model a bit, this way it can hold now Tapo C100 or C110 cameras.
Introduction I wanted to reuse my budget-friendly Tapo C110 camera, which I originally bought for the MK4, with my Prusa Core One. This custom case allows for easy mounting in one corner of the printer, similar to the Buddy3D camera…
Quick and dirty mount for the Tapo TC60 (Amazon version) or C100 camera, wanted to quickly mount it in the corner of our puppies crate. We use this to check on our puppy while he's in his crate as we cover it. It has been up for about 3…
The camera holder attached to the Centauri carbon glass door using the two screws on the top hinge. The housing is designed to reuse these screws so that no extra hardware is required. There are two versions of this model, a clean version…
I have a canvas enclosure around my printer whose frame is made from 17 mm steel tubing. I use a Tapo C100 webcam to monitor my prints, so I designed a bracket which clamps onto that tubing, and has a socket for the ball-joint on the…
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…
Tapo camera mount. Mount as you need: double-sided adhesive tape, magnets, screws, cable ties, zip ties Magnets holes - 10 mm outer diameter, 5,2 mm deep
The mount has an exit port for the barrel connector. The back is open (for microphone & speaker), and the SD slot is accessible. Camera can easily be removed, tested with C110 (C100 should probably work). I tested only the 5° tilted…
I wanted to youse a Miele Brush extention, now i can do it :-)
To be printed with Prusament PETG 0.2 QUALITY 20% infill
A switch panel blank for the awkward shaped fixings either side of the heater controls on earlier (non-satnav) Landcruisers. It may fit other toyota/lexus models? Let me know if so. This is for the LH (passenger side in UK/Aus/Japan) - if…
Place on the side with the cable guide up. Use support Prints well with PETG and standard settings on a MK4 or an XL. You might want to secure the cable with zip ties
This parametric boom extends the length of the standard camera mount by any size you want. The parametric OpenSCAD model allows setting the length and fine-tuning parameters as needed. …or simply use one of the STLs I've rendered for you.…
Attachment of the Tapo c100/110 camera to the Skadis board.
An angled bracket allowing you to mount a Tapo C100 or C110 to a wall or other vertical surface. You can either have the camera platform face upward or forward - either will work. The pegs on the bracket fit in the mounting holes on the…
Model and G code for these handy castor cups for the TC100 gaming chair or any other chair with 66mm dia x 55mm wide castors. Great for stopping your gaming chair sliding around on laminate floor. You can also add some non slip mat…
You'll also need 8x3mm Magnet x2 CA/Super/Instant glue for plastic parts Epoxy or other glue for magnets Instructions - Print camera plat and glue helper part flat, print the clip on its side - Use more perimeters for the clip, e.g. 4 -…
Thank @3DSourcerer and @BiTN_84310 for their ingenious designs - I only mixed @BiTN_84310 's C100 GoPro mount with @3DSourcerer' s awesome Bu Stik mounting system :) So, a dirty Tinkercad remix to mount my Tapo C100 camera on the Bambu…
3mm holes for mounting the holder to the frame. Twist in T nuts can be used: https://www.printables.com/model/578512-t-nuts-8mm-slot M4 countersunk head screws for mounting the camera. V2 Increased distance to the print bed for a better…
This basic mount allows to attach Tapo C100 camera with any original camera parts modifications. Camera is positioned upside down but it is possible to rotate the image by 180 degrees when camera is beeing used in Octoeverywhere.
I wanted some way of monitoring longer prints even during night without leaving the lights on, so I bought Tapo C100, which is IMO great for 3D printer monitoring. However I did not find any suitable holder for Anycubic Mega S, so I…
On the Scheppach DC100 the inlet blows straight onto the motor assembly and clogs up the filter. I wanted to change the direction of the inflowing air to get some cycloidal action going. Angling the 100mm hose would require a much bigger…
Mixed the two models (Sunglasses holder (for Honeycomb Storage Wall) by DusBus https://www.printables.com/de/model/259509-sunglasses-holder-for-honeycomb-storage-wall/comments and TP-Link Tapo C100-110 Camera Mount For Creality Ender3V2…
Suporte Base P/ All In One Positivo Union C1260 C1000 K3230
A streamlined, simple mount designed to perfectly align the Tapo C110 camera with the top rails of the Prusa XL, ensuring a seamless and secure fit. Material: PETG 30% Infill Supports on build plate only
Tapo c100 very slim camera case from TP-Link. The camera includes a Gopro mount on the back and a small rain cover. Splited into several parts for easy printing. The individual parts contain small holes for threading the filament through…
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit…
This is a remix of the REX-C100 case mount by GreySID. I have made the following changes which were more suitable for my needs; The four mounting holes in the corners have been increased from 4mm to 6mm diameter to accommodate larger…
Kamera funguje ako cloudova a system ONVIF takže je možne sa pripojiť akokoľvek. Ja to mam nastavene aj cez iSPY a funguje bez problémov. Veľmi kvalitné je nočné videnie, takže tlačím v absolútnej tme a predsa vidím absolútne všetko.…
This remix ensures a good attachment of the camera to the frame of a Sovol SV06.
I've bought a TP-Link Tapo C100 Camera to substitute one of my Reolink E1 cameras that broke (it's the third E1 that stops working in less than three years... stay away from this model!). Even though it can be tilted downwards, if you…
very simple arm to hold the ball socket end of Tapo C100 camera. Separated into two parts for better printing, i used superglue to join the two parts and it works fine. Tested with simple PLA.
Okay, so i wanted a cheap camera to monitor my prints. I got a Tapo C100 and it's great. It's cheap, the app is very good, but most importantly: it streams via RTSP. So you can stream that camera from basically everywhere (not only the…
I wasn't a fan of how the camera attached to the cage so I roughly combined these two models to make something that would work Should be oriented okay for printing
i create for my VC100 hand vacuum cleaner a cleaning mount.
TP-Link Tapo C100/C110 holder for FLSUN Super Racer with adjustable arm Requires 3x 20mm M5 screws and nuts Instructions: choose Left or Right holder Print 2x 55mm arms 3x/4x cable holders 1x other components
Unable to find a holder that suited my needs, I merged two models discovered on this site for my printer's 7.9mm plastic tube frame enclosure. I made some minor adjustments to enhance its solidity. Both the clamp and the holder part are…
Hey, I designed this simple mount to have a nice top view. There is no reflection in the picture due to the contact. There is a small indentation at the bottom for an adhesive strip to attach the mount. Tapo Holder for the slim Case:…
Einfacher schneller Adapter um an einen DC100 von Scheppach, ein HT Rohr anzuschließen, da mich auf meinem YT Channel jemand danach fragte. Ich habe es anders gelöst, deshalb nicht gedruckt. Sollte aber passen. Ansonsten die Parameter in…
Remix of the CR6-SE Tapo C100 mount by Collind777 as that mount didn't work for my Ender 3. Shouldn't need supports or a brim in my experience. I printed this with 30% infill and PETG.
Hey Makers ! Looking for an easy and affordable way to mount a plug-and-play camera on your Prusa Core One? If, like me, you're not yet comfortable with ESP32, OctoPrint, and other advanced setups, I’ve got a simple solution for you!…
This is a small camera mount I made for the Tapo C100, to slot into the top corner of the core one like the buddy 3D camera does. You can remove the base of the C100 and then insert the ball into the joint, there is an optional collar too…
BOM: 2 magnit 10*2 9V 0.6A USB Adapter https://aliexpress.ru/item/4001081594055.html?sku_id=10000014234470396
A adapter to mount the TP-Link Tapo C100 Camera to the articulated Camera mount. The _90 version has the C100 Camera Connection rotated by 90 Degrees.
Stole Andreas Gohr arm from the Customizable Raspberry Pi Camera Bed Mount (Prusa MK3) , but made a remix for the Tapo C100 camera. Used a 11mm M3 screw to fasten the mount to the arm. Print view
I merged the carriage from both these designs to create a carriage that would support a WLC100 and work on the fully 3D printed press.
I've added the step files in case you want to make your own mounts or changes Use M3 5mm to 8mm bolts to hold arms together
Spool and Tip caddy for the Weller WLC100 soldering station. Can serve as a standalone spool holder when you're soldering, then seats nicely back on the station when you're not! 3 Versions available: Normal (Solder Tips Only) .58 in…
TP-Link Tapo C100/C110 holder for FLSUN Q5 Requires 4x 20mm M5 screws and nuts Print Settings Printer: FLSUN Q5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow Category: 3D Printer Accessories
Ender 3 S1 Pro Handle w/ Tapo C100 Mount
This Adapter screws in place of the original inlet with the original screws and without any other modifications necessary. It provides a decent cyclone effect to reduce clogging of the filter. Additionally it reduces the inlet to fit…
Pretty simple mount for a TPLink Tapo C100 camera that has holes spaced for the spool holder on the Sovol SV06+, and studs for the screw holes on the camera itself. It'd probably fit on the SV06 but don't have one to test - post a make…
---TAPO C100 V1--- Tapo C100 holder on z-axis. Follow the progress of your print layer by layer Only two cable ties to hold the support. Remove the foot from the camera and reattach it after passing the base through the hole. If you want,…
Super flexible und anpassbare Kamerahalterung. Der ursprüngliche Ersteller hat viele Arme, Gelenke, Armlängen, Fixierung usw. erstellt. Was mir noch fehlte, war eine passende Aufnahme für den Kugelkopf der Tapo C100/C110. Diesen und nur…
I wanted a simple and affordable solution to monitor my prints, so I chose the Tapo C110 camera, the newer version of the C100. It’s a good choice - affordable, with a great app, and it supports RTSP streaming. For this remix, I based the…
Over on thingiverse I found this awesome set of adapters for my Vorwerk hand-vacuum. Especially the kids like to “clean” the floor with it, but PLA on hard floor makes an unpleasant screechy sound. The original designer printed the bottom…
Remixed from @MrNeedlemouse. I modified the bottom of the tight slim base to use four 5mm x 3mm magnets instead of the standard screw holes. This allows it to securely attach to magnetic surfaces without any vibration. At the moment, I…
Tapo C100 C110 mount shelve Ikea Lack enclosure No supports are needed. Quick easy printing. PLA is good.
holes fist smaller cabel ties - 2,5 mm Max width .
For those, who wants housing blank (without logo).
A quick and dirty remix of the holder arm to accept 28mm soldering irons like the Weller 40W (WLC100) . I had success when printing with 2 walls and 20% adaptive cubic infill in OrcaSlicer with Overture PLA.
I use a Tapo C100 camera to monitor 3D print progress. This is an inexpensive camera which is effective for this purpose and doesn't require a cloud service. I run a script on a Linux box that pushes images to Prusa Connect as well as…
This is a slide-in (rail style) mount for the Tapo C100. It was originally designed to support a peephole doorbell camera function, allowing a dynamic placement within the mount for optimal focusing distance relative to the peephole lens…
Camera Mount for 1 or 2 head Prusa XL Printer, aplicable for the Tapo C100. For mounting the holes are used, which are provided for mounting the printheads.
needed a place to keep my extra soldering tip. I only had one extra at the time. I need to design 1 to hold six now. This is designed to hold 4 soldering iron tips on the Weller WLC100 Solder Station. If you need more spaces, print 2 and…
