Cisco C1000-8P-2G-L rack mount wings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack mount wings for the 8 ports C1000 series Cisco switch since they stopped shipping them with their lower end switch
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 245
- Wydruki
- 1
- Wyświetlenia
- 1459
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wings to be able to mount a Cisco C1000 into a standard 19" rack.
I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic infill.
You will need to find two screws (not 100% sure of type, got mine from another Cisco switch) and you will need to replace 4 existing chassis screws with M3 screw + washer.
I have added small cylinders at the bottom of the lower rack mount holes to make printing a bit easier. They can easily be cut after.
NOTE: Model is only for one side, simply mirror it in your slicer to get the other side.