Cisco C1000-8P-2G-L rack mount wings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rack mount wings for the 8 ports C1000 series Cisco switch since they stopped shipping them with their lower end switch
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 246
- Makes
- 1
- Views
- 1,461
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wings to be able to mount a Cisco C1000 into a standard 19" rack.
I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic infill.
You will need to find two screws (not 100% sure of type, got mine from another Cisco switch) and you will need to replace 4 existing chassis screws with M3 screw + washer.
I have added small cylinders at the bottom of the lower rack mount holes to make printing a bit easier. They can easily be cut after.
NOTE: Model is only for one side, simply mirror it in your slicer to get the other side.