1 / 1
Asus 10G PCI-E Network Card (xg-c100c) Low Profile Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
low profile bracket for the XG-C100C. I designed this because I wanted to install this card in my HP SFF computer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket.
Feel free to reach out if this model needs any tweaks. I printed this in both PLA and PETG, manual support on each end, screw tabs facing the bed plate. On my P1S this printed very quickly, around 16 minutes.
