Liczymy pasujące modele…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
A simple cable comb for sleeved PCIE 6 pin cables, tested on sleeved wires with a total diameter of 3.1mm.
I made those models to help stabilize the GPU and give a solid base for the PCI-E raiser to stand on. It also looks better than the brass standoffs and use m3x6 screws. PCIE-Standoff: Fit flush under the raiser bracket.…
I purchased this PCIe to SATA adapter card, not realising that the built-in fan is extremely loud. The 3d printable bracket uploaded here allows for attaching a potentiometer to the card, in order to vary the fan speed. I am using a…
This case is for Raspberry Pi 5 with Geekworm X1001 (PCIe to NVMe), Geekworm H505 (active cooler), 2280 disk and NVMe passive cooler (i.e. ThermalrightTR-M.2-2280). Requires 4x M2.5x6 Print Layer height: 0.2mm Infill: rectilinear 10%…
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
If you have a water cooled PC, you may intend to use a Filter-Element within your loop, to prevent the pump from sucking in dust/dirt. Most In-Line Filter-Elements are not easy to clean, because you have to completely empty your loop or…
I was looking for a dual PCIe vertical GPU mount that could accommodate a low-profile network card as well, but I couldn't find any that suited my needs, so I designed one! BOM: - x5 M3x10 Flat head screws - x4 M3x16 Flat head screws - x3…
Adapter to use a different PCIe riser cable with the non-standard screw pattern in the Antec Striker case. Designed and tested with the LINKUP - AVA5 PCIE 5.0 Riser Cable but will likely work with others. Fusion file included for tweaking…
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
A custom bracket to mount x16 PCIe cards in the Supermicro Microcloud 5037MR-H8TRF (X9SRD-F and X10DRD-F Nodes) Required parts M4x5mm Truss-head screws - https://amzn.to/4arJtzR WLGQ PCI-E X8 Riser Card - https://amzn.to/4apY8eS
This mount is designed for the PCIe x16 board of the "TISHRIC M.2 M-Key 2242/2260/2280 To PCIE 4.0 X16 Riser Card PWR ATX 6PIN 12 VUp To 32G/bps With Oculink SFF-8612/8611 Cable 50cm". The one linked is the 6-pin pcie power version…
My case was too tight for a USB Adapter card so I built this enclousure to sit in the case and allow a safe spot for the front USB header adapter to work. Im including the OpenSCAD so people that need to make modifications for other…
This is a full length PCIE slot bracket for nividia quatro NVS 300 graphics card.
Remixed an existing dual 80mm fan to add a third fan for my application, and added fan cable brackets.
Basic PCIe cover based on PCI SIG 1.1 spec made in FreeCAD. The included .fcstd project is available for changes and adjustments to anybodys needs. Feel free to adjust the model to fit your specific PCIe card and its IO. Make yourself the…
Meant to replace the full-height bracket I received to fit an SFF PC. My pc is the Dell 5060 SFF Re-Uses the Screws my Perc came with. Major diameter of 2.8mm minor diameter of 2.0mm
This is a simple full-length PCIe bracket for the Dell PowerEdge H310 HBA / RAID controller. I mounted the card to the bracket with two short M3 bolts and nuts, but you can also use an M4 bolt and screw directly into the plastic. With…
Bought a Raspberry Pi 5 along with the "active cooler" from Chicago Electronics Distributors and a "GeeekPi N04 M.2 NVMe to PCIe Adapter for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280" from Amazon. Needed a case, so voilà.…
Parametric design made with fusion 360, in case you'd like to tweak it for a different model. Supports are required
You might need slightly longer pcie screws depending on your case.
The original bracket was too thin for my use. Even before adding the PoE hat, while it worked, it was sagging too much for my taste. As I also wanted a PoE hat, I wanted it to be more solid. This is modified in fusion360 off the mesh…
10G server NICs are usually ugly green PCIe cards. Not a great fit for a gaming PC. But maybe you still want one for whatever reason. A backplate can easily fix this. This one is made for the Inter-Tech Argus ST-7211 and hides the ugly…
Prints face down, then whilst still warm bend the end to make the “L” shape for a standard bracket. There is a relief in the model that helps with bending to the correct shape.
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
UPDATED on 2024-11-22 to add PCIe Slot (compatible with PCIe 1x, 4x, 8x and 16x) supports, a reinforced mounting bracket, and slightly larger mounting holes to prevent cracking with non-self-tapping fan screws. This is a 80mm PC fan…
This is a completely new module that will be compatible with the MASS itx pc case. the purpose it to add the ability to use full size PCIE Cards with the sff pc. THIS MODEL IS A WORK IN PROGRESS
Needed a fractionally larger PCI-E Riser Lock. Source was not in openscad so I've recreated it in openscad and extended its height by 0.5mm The dimensions are now settable in the variables body_x body_y body_z Print instructions Category:…
Corrected original model. Full size PCIE plates have opposite facing screw down tabs than low profile.
If you find my designs useful, please consider sending a tip I recently mounted my GeForce RTX 3080 vertically in my Corsair iCUE 4000X case using the Linkup PCI-E 4.0 Riser Support cable but I was concerned about how much the Riser's PCB…
Rear bracket to fit a SuperMicro AOC-STG-i2T NIC into a Lenovo Tiny.
A simple cable comb for sleeved PCIE 6 pin cables, tested on sleeved wires with a total diameter of 3.1mm.
As my cMP 4,1/5,1 2nd PCIe 16x slot is partly blocked by a 2,5 slot height PC GPU, I needed to come up with a solution. I use a normal PCIe riser cable to connect to the slot but needed a place to put the NVMe card. Hence I created a…
This module allows mounting a 6 SATA ports PCIe card to a DAP 2U MP-1 panel or on my printable version . The SATA board is based on the ASM1166. An extension cable PCIe 4X will be needed. Other DAP mount modules are available on my profile
Elevate your Dell Optiplex 3050 Micro with these custom 3D printable model files designed to accommodate an MSI RTX 3050 LP graphics card. This set includes: 3D Case : A custom-designed case tailored for the Dell 3050 Micro, providing…
Created this to use on my wall mounted PC. as nothing i saw worked for what i needed.
The use case here was a NIC and an HBA being bifurcated out of a single x16 slot. The case has 2 full height PCIe slots, but the bifurcation board adds some extra height down below. This moves the mount point to the top part of the slot,…
Update 12/20/2024 - Reworked the cover plate tab to improve strength and fit. Added honeycomb pattern ventilation holes to the Pi mount to improve cooling. I wanted to rehome my PiKVM built a couple years ago to mount somehow to my 4U…
I created this bracket for an ICYBOX PCIe NVMe SSD adapter card to be hold in an QNAP NAS that need flatbracket. V1 - One for selfcut threads and one for inserts (M3). V2 - New designed, fits better for a friend. (melting M3 inserts only)…
This is a remix of Matthew Neuforth's PCIe bracket for the Mellanox CX354A, adding an LED window. This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes…
This is a low profile PCIE bracket for the Mellanox ConnectX-4 NIC. It was tested with a HP DL120 Gen 9 server.
increased hole size for 8x3mm magnets for the lid and enclosure.
Full size slot cover for Adaptec ASC-29320 SCSI PCIe Controller Card that replaces the Low Profile bracket.
These 4U generic mining / server cases are available locally under many labels. In Europe, they are, for example, from Inter-Tech ( https://www.inter-tech.de/Mining_Case.html ). If you want to use 6 GPUs with PCIe X1 riser adapter, the…
This is an attachment for the PCI-E x4 Riser Card, if you cannot use the slot bracket. PCIE, PCI-E PCI X4 Riser Card : https://www.aliexpress.com/item/1005007577485056.html Fusion 360 Archive and STEP File included for easy remix
I wanted a raspberry pi 5 case that would also house my waveshare usb pcie hat. It comes with everything you need in order to mount it in the case including the standoffs, and hex nuts. You will also need to purchase a raspberry pi 5…
This is a PCIe Bracket for mounting an LSI SAS 9300-8e in a Full Height PCIe slot. I found it worked really well printing it with the little notch required for the SAS connector facing up an using supports under the bracket and inside of…
Hi internet DIY'ers. Look this is just something super quick in like 30mins of design and buggering around with trying to figure out how I can mount my old GPU's to a wall for display purposes. It 'should' fit most GPU's... I think the…
PCIe 80mm Fan mount Please note that I made this using my own PCI bracket for my Open case server. The PCI plate should probably fit normal computer cases but I don't know and I have no means of trying it out. Feel free to try it out or…
The addition of a mount point and support bracket allows you to stack the pcie card below the drives, taking up less horizontal space. One could argue that the extension cable may impact performance, so be forewarned.
This model is meant to ssecure a PCIe card to a plat surface, then the motherboard is screwed onto same flat surface. You can use say a plywood plank, secure the motherboard on top, and this to the PCIe card and to the edge of the board.…
The included scad file has parameters for the position, size, and number of holes to be cut into the panel.
This is a half shroud designed to use a 40mm fan and to slide along the top of a PCIE card and sit in place to force air through a heatsink. SHould fit many NIC, or HBA cards with external connectors etc. I had no space between the lower…
I know this is wildly niche, but since I took the time to make it, I figured I'd share. Basically, you fasten this to a Win TV 1250 Low Profile PCIE tuner if the pack you bought it with doesn't include the full-sized cover and it'll fit…
Print standing on “feet”. Tree supports are good - auto ones should work. Needed mine for HP T730 thin client.
Simple 92mm fan bracket for additional cooling of PCIe cards. Designed to fit in Supermicro's SC743 SuperChassis, should also work in SC742, SC745, SC748 and other 4U models of this family. Covers bottom 4 slots and fits over half-height…
See: https://esologic.com/1kw_openbenchtable/ for BOM and project context.
TLDR; allows to use both x1 mining pcie risers and ribbon pcie risers on a cheap mining frame, useful for consumer motherboard AI rigs, but can also be used as a stand for an x1 riser. I recommend cutting off the back wall in your slicer…
On some cards, it's a bit of a tight fit, but I can always get them in, and there's no wiggle. On the pictures is my first version. I decreased in v1/v2 the height of the slot to get no trouble with resistors on the card. If you have any…
Offset PCIe bracket for P620 quadro style card stacked on a dual m.2 bifurcation card 8x4x4x bifurcation riser from aliexpress: https://www.aliexpress.com/item/1005005889855197.html
I made those models to help stabilize the GPU and give a solid base for the PCI-E raiser to stand on. It also looks better than the brass standoffs and use m3x6 screws. PCIE-Standoff: Fit flush under the raiser bracket.…
Remix of @Julius3E8's PCIe bracket Features: Fits PCIe x1-x16 cards Note: Make sure your card's center of mass is not over the interface, in that case you need additional support Slot for double bracket style cards Cutouts and wall…
ASA suggested for stiffness and temperature resistance. May droop a bit but it shouldn‘t be a structural concern. Mine ended up being supported from below by the excess length of SATA and power cables running between the tray and the PSU…
Some versions of the NanoKVM come with a non-standard PCIe bracket that is too high for the mount hole. This model is based on my measurements but has the correct height. It's somewhat flexible but does not compromise the structure when…
I cuted one of the side scew mounts from each of the double port parts and glued them to each other
PCIE Mount to install an Aquaero or simillar 5.25" bay Device inside the PC case. Recommend to print in PETG, ABS, ASA etc... No Support or Brim needed
I plan on displaying some bigger GPU's such as the HD5970 dual-GPU graphics card so I decided to beef up the original version of this stand. Plus I added a couple screw holes for mounting to a surface for a more secure/permanent…
This is a custom-designed riser support and cable guide for the Fujitsu Futro S920 thin client, created to solve a common mechanical issue when using generic PCIe x4 angled risers. The Problem When I tried to use a generic angled PCIe x4…
PCIe card holder colder, compatible with the popular Gridfinity organization system. Fits 2 1-slot cards in a 1x3 grid space. Based on a 1x3x1 (x,y,z) generated Gridfinity base platform from https://gridfinity.bouwens.co/
This is my customized 10-inch rack mount for the ZimaBlade. I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card. Because I also added a 2.5” hard drive mount,…
I’m using a mini-ITX motherboard inside a Jonsbo N4 case. The board has a single PCIe slot with bifurcation support, and I needed to connect three devices: a SAS controller, a 5GbE NIC, and an NVMe SSD. Hardware I used: Mustpoint Dual…
I purchased this PCIe to SATA adapter card, not realising that the built-in fan is extremely loud. The 3d printable bracket uploaded here allows for attaching a potentiometer to the card, in order to vary the fan speed. I am using a…
This case is for Raspberry Pi 5 with Geekworm X1001 (PCIe to NVMe), Geekworm H505 (active cooler), 2280 disk and NVMe passive cooler (i.e. ThermalrightTR-M.2-2280). Requires 4x M2.5x6 Print Layer height: 0.2mm Infill: rectilinear 10%…
A remix to allow 3x Dual-Slot or 3x Triple-Slot PCIe GPUs to stand properly and tidily. I have to frequently swap between GPUs on my work test bench when troubleshooting different customer's PCs. I was sick of lying them flat, or having…
Hi everyone. It's my first upload here so any suggestions for improvements are welcome. There was this special deal for a Professional-grade Radeon Instinct MI8 (basically a R9 Nano without a fan and with only 1 monitor-out: DisplayPort)…
This model is a case for any Raspberry Pi 5, Waveshare PoE hat F and another PCIe board (for example Pimoroni NVMe Base Duo, Pineboards Hatdrive AI etc), which comes with a heatsink and fan for keeping your Pi cool as well as powered.…
I lost my low profile bracket and ebay wants 20 bucks for one of these... Fits my Supermicro CSE-826. According to ebay sellers this should also fit the LSI 9286CV-8e, 9285-8E, 9280-8e, 9200-8e, and HP422
Low Profile Vented PCIe Bracket – replacement bracket designed for low profile (half-height) PCI Express cards. Features ventilation slots to improve airflow and cooling within the case. Ideal for compact or small form factor (SFF) PC…
The arrows are for orientation, it goes on the inside of the case. Iron for a nicer look.
It's a PCIe Bracket for a Noctua NF-A8. I used it to cool off an LSI 9300 card. Check your motherboard for clearances beforehand. The PCIe bracket portion of the model is two millimeters thick. This has worked in both cases I've tried…
PCI/PCIE slot cover for the Corsair Frame 4000D case. The hole felt a little weird for me - I figured I would try to design a cover for it. I would suggest printing it inside face-down because that way you will manage to hide most of the…
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
A pack of 3 PCIe slot covers Includes one with a grill, one with a slot for a USB, and a blank with no holes. Known to work on Corsair 4000D Airflow.
I wanted to mount an Arduino Nano inside my PC case. This PCIe bracket allows you to make your own boards to mount other
I removed the bottom tab as it was too thick for some cases I used the screws that came with the card, I don't know what size they are. The holes are 2,5mm Also check out my Fan Bracket…
Full instructions and description for creating this magnificent work of science located here: https://ganon.club/index.php/2019/04/04/getting-10gbps-on-a-skull-canyon-nuc-without-thunderbolt-3-ngff-to-pcie-x4-riser/ In summary: Print this…
This fan shroud is remixed. Raised it up so it could clear the 8-pin cable at the bottom of my x870e MSI Carbon. Original is linked from thingverse if you don't need the extended version. I am not a pro so there might be issue with the…
DIN rail mount for waveshare 4ch nvme board, using m3 heatset inserts. Maintains the original Waveshare FPC and power cable to the rpi5. DC connector also fully usable. uses Maxstupo 51mm din rail clip which I've also included in this…
Shrouds were used in this video here: https://www.youtube.com/watch?v=J0ibj-7mhQs I can't guarantee it fitting any cars other than what I used in the video. Print the base and snap it to the card. Then print either the full shroud or the…
MZHOU 2 SATA Card Erweiterungskarte,PCI-E 3.0 GEN3 JMICRON+JMB582 Chip,6 Gbit/s-Erweiterungsadapterplatinen PCI Express Controller Housing to use without bracket.
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
If you have a water cooled PC, you may intend to use a Filter-Element within your loop, to prevent the pump from sucking in dust/dirt. Most In-Line Filter-Elements are not easy to clean, because you have to completely empty your loop or…
PCIe card holder, versions for 2, 4, 6 and 8 cards. Works very nice even with 0.3mm layer heightWorks very nice even with 0.3mm layer height
Low profile bracket for a Quadro NVS 285 Graphics Card included a step file The LFH-59 (DMS-59) has 3 rows of 15 pins and 1 row of 14 pins. This connector is used to support computer video applications that use multiple monitors for an…
This is the remix for latest Ncase T1 V2.5 pcie 5.0 riser. Its a simple mod but does its job. Works with 35mm standoffs. Use PETG or ASA/ABS. I use PETG with 35% infill for better rigitty.
