Vertical PCIe Riser Mount for Fractal Design Define 7/XL Cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount prevents vertically mounted PCIe risers from being loose and adds another point of contact.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is designed for the PCIe x16 board of the "TISHRIC M.2 M-Key 2242/2260/2280 To PCIE 4.0 X16 Riser Card PWR ATX 6PIN 12 VUp To 32G/bps With Oculink SFF-8612/8611 Cable 50cm". The one linked is the 6-pin pcie power version (v1.1). There's a 24-pin power version (v1.2) but I think that one is a bit overkill but should be compatible.
https://www.aliexpress.com/item/1005010712390112.html
Requires:
5x M3 Voron heat inserts.
2x 6-32 screws (Length 4mm) - So your standard mounting screws or PSU screws.
5x M3 screws - The ones that come with the case is fine. Max length: 8mm.
Instructions:
Insert the heat inserts into the mount.
Attach the mount to the case using your 6-32 screws. Keep a bit loose as it might make removal easier.
Remove the 4 magnet mounting points from the riser and screw into the mount.
Plug in the 6-Pin PCIe power cable.
install your device of choice.
Mount used in images is PLA+ (3 walls, 25% gyroid infill) but use whatever material you want for increased temperature resistance.
Added a slimmed down version to reduce material usage.