Vertical PCIe Riser Mount for Fractal Design Define 7/XL Cases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount prevents vertically mounted PCIe risers from being loose and adds another point of contact.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is designed for the PCIe x16 board of the "TISHRIC M.2 M-Key 2242/2260/2280 To PCIE 4.0 X16 Riser Card PWR ATX 6PIN 12 VUp To 32G/bps With Oculink SFF-8612/8611 Cable 50cm". The one linked is the 6-pin pcie power version (v1.1). There's a 24-pin power version (v1.2) but I think that one is a bit overkill but should be compatible.
https://www.aliexpress.com/item/1005010712390112.html
Requires:
5x M3 Voron heat inserts.
2x 6-32 screws (Length 4mm) - So your standard mounting screws or PSU screws.
5x M3 screws - The ones that come with the case is fine. Max length: 8mm.
Instructions:
Insert the heat inserts into the mount.
Attach the mount to the case using your 6-32 screws. Keep a bit loose as it might make removal easier.
Remove the 4 magnet mounting points from the riser and screw into the mount.
Plug in the 6-Pin PCIe power cable.
install your device of choice.
Mount used in images is PLA+ (3 walls, 25% gyroid infill) but use whatever material you want for increased temperature resistance.
Added a slimmed down version to reduce material usage.