Dual Half-Height to Full-Height PCIe Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts two Half-Height devices to the top half of a full-size PCIe slot. Useful with bifurcation boards.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
The use case here was a NIC and an HBA being bifurcated out of a single x16 slot. The case has 2 full height PCIe slots, but the bifurcation board adds some extra height down below. This moves the mount point to the top part of the slot, “levitating” the two cards… but also adding space for the bifurcation board and riser.
The ethernet cutout spacing is specifically for a TL540, but discrepancies should be pretty fixable with some snips. The tabs that mount to the bracket seem to be standard across my samples.
Uses the cards' original mounting screws, plus some M3x6 BHCS.