10 inch rack for ZimaBlade with PCIe 2.5G ports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10 inch rack for ZimaBlade with PCIe 2.5G ports
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 251
- Wydruki
- 2
- Wyświetlenia
- 1838
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my customized 10-inch rack mount for the ZimaBlade.
I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card.
Because I also added a 2.5” hard drive mount, the space reserved for PCIe expansion cards has become quite limited. Based on current tests, only PCIe expansion cards with a width under 50mm can fit. Alternatively, installing a Keystone jack is also a good choice.
Installation method:
Align the ZimaBlade’s interface cables with the corresponding slots on the printed part, then press it down to secure. No screws are needed.



Things in this build:
ZimaBlade,2.5Gb Network Card PCI Express X1 to RJ45 Port,
If you want your front panel cable management to look cleaner, you’ll need these two items.A right-angle USB-C extension cable and a rubber grommet.
