10 inch rack for ZimaBlade with PCIe 2.5G ports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10 inch rack for ZimaBlade with PCIe 2.5G ports
- Rating
- 4.5 / 5
- Likes
- 25
- Downloads
- 251
- Makes
- 2
- Views
- 1,838
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my customized 10-inch rack mount for the ZimaBlade.
I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card.
Because I also added a 2.5” hard drive mount, the space reserved for PCIe expansion cards has become quite limited. Based on current tests, only PCIe expansion cards with a width under 50mm can fit. Alternatively, installing a Keystone jack is also a good choice.
Installation method:
Align the ZimaBlade’s interface cables with the corresponding slots on the printed part, then press it down to secure. No screws are needed.



Things in this build:
ZimaBlade,2.5Gb Network Card PCI Express X1 to RJ45 Port,
If you want your front panel cable management to look cleaner, you’ll need these two items.A right-angle USB-C extension cable and a rubber grommet.
