PCIe card fan bracket for Supermicro SC74X 4U chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 92mm fan bracket for additional cooling of PCIe cards in Supermicro SC742/SC743/SC745/SC748 4U chassis
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Simple 92mm fan bracket for additional cooling of PCIe cards.
Designed to fit in Supermicro's SC743 SuperChassis, should also work in SC742, SC745, SC748 and other 4U models of this family.
Covers bottom 4 slots and fits over half-height cards - ideal for HBA/RAID cards, NICs etc.
Uses existing holes (presumably used for rackmount rails) to mount to the bottom of the chassis. Requires M4 hardware to mount to the chassis and to mount the fan: 2 short (~10mm) screws, 2 longer (35mm+) screws and 4 nuts; washers are optional though recommended.
The photos show a slightly older version of the model over a Dell H310 aka LSI-9211 and an Intel X520 card; the fan just barely touches the dual-slot GPU in slots 2&3. Uploaded model has improved relief for the protrusion in the chassis and added 0.5mm clearances around the fan to account for slight variations between fan manufacturers.