P
PrintablesSuperIntendent
High-efficiency Noctua 92mm fan grill
Noctua design fan grill sized for 92mm fans like the Noctua NF-A9
- Pobrania
- 1033
- Polubienia
- 63
- Ocena
- 5
Wyniki wyszukiwania: 92mm
Liczymy pasujące modele…
P
PrintablesLiran017
GMKtec M5 Pro 92mm Fan Case (Noctua High-efficiency Grill)
I was asked to add a fan grill to the GMKtec Pro case by @RazziaDK. Because Noctua are so great, I went with their high efficiency grill fan, scaled down to fit 92mm fans.
- Pobrania
- 423
- Polubienia
- 13
- Ocena
- 5
P
PrintablesC1RKT
Basic Line Stencil (92mm x 147mm)
A simple stencil to draw lines on a blank page.
- Pobrania
- 93
- Polubienia
- 25
- Ocena
- 0
P
PrintablesMoro
Banana Pi BPI R4 92mm fan cover.
A cover to keep the temps down. Made for a 92mm Noctua fan. Two versions of the file. For different placement of the hole for wires to go through. I wired it up to the internal 12V port (CN19) Far right pin is 12V, middle two are ground,…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
Printableschall3ng3r
Mug Cover - 92mm
Use 25% infill Can be printed in normal, draft and ultra draft profiles (shown in images is ultra draft profile) Total diameter ~92mm Suitable for mugs with ~88mm or less diameter
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesЕвгений Вольферц
92mm Fan Bracket for Mini-PC
Brackets to mount a 92mm fan to a fanless Mini-PC with Intel N100 processor and similar ( https://aliexpress.ru/item/1005007529877050.html ) Printed in PETG with supports
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesIonNight
RTX 5060 Ti 16GB 92mm fan brackets zip tie or hard mounted
Hey, someone on instagram wanted a mount for his loud GPU Print the brackets with support on the small overhang, see the photos. Each model needs support to make the mounts interlock. Here are 2 versions, one for Asus Prime 5060 Ti 16GB…
- Pobrania
- 7
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWildHuntsman
92mm Fan + 40mm Stepper Coolers for Big Tree Tech Manta M5P Case V0.2
This mod allows the lid (Remix of Big Tree Tech Manta M5P Case V0.2 - Lid for 92mmx14 fan) , when used with the BTT Manta M5P V0.2 Internal Fans_12mm Hole or BTT Manta M5P Body V0.2 Fans Inside (either BTT Manta M5P V0.2 Internal Fan…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
WD My Cloud EX2 Ultra fan cover replacement, noise reduction, 92mm
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 92mm fan. 70mm version and additional details are avaible here: https://www.thingiverse.com/thing:5177184…
P
Printables
Qidi Plus4 80mm/92mm fan vent cover suitable for hanging bin
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
P
Printables
GMKtec M5 Pro 92mm Fan Case (Noctua High-efficiency Grill)
I was asked to add a fan grill to the GMKtec Pro case by @RazziaDK. Because Noctua are so great, I went with their high efficiency grill fan, scaled down to fit 92mm fans.
P
Printables
Qidi Plus4 92mm fan vent cover suitable for hanging bin
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
P
Printables
80mm PC Fan to 92mm Mounting Plate / Adapter
This bracket allows you to use an 80mm fan where you would normally use a 92mm one. I needed it to mount an old CPU fan to the back of a case but there are plenty of other uses. You'll need 8 screws; 4 to mount the bracket and 4 to mount…
P
Printables
Mini Desk Fan (92mm) (No Screws!)
Easy to print and assemble. (No need for screws.) Can also be used as a solder fume extractor. (Include a frame to attach a filter.) Adjustable angle. Steps to reproduce: Purchase a 92mm fan and a USB 5v to 12v convert cable. Connect the…
P
Printables
A4-H2O bottom panel with 92mm fan mount
dont forget to scale model, printed mine in ABS best used with reverse psu mount which is also available I do not consent to the sale of this model or any of its remixes in digital or physical form.
P
Printables
GeoCaching 120: Gabel - 92mm - spitze Enden - M6-Mount
GeoCaching: Gabel - Öffnung 92mm - M6-Mount - spitze Enden 4 Modelle: 120 - Spitz 123 - Spitz - 4x Bohrungen Ø6.2mm 125 - Spitz - 4x Bohrungen Ø6.2mm - Spitze 1x konisch 126 - Spitz - 4x Bohrungen Ø6.2mm - Spitze beide konisch => My…
P
Printables
EVGA FTW3 3x92mm Deshroud Bracket
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
P
Printables
92MM Fan to 2.5" Hose Adapter
This is a shroud to adapt a 92mm enclosure fan to a standard 2.5" air handling tube for outdoor ventilation.
P
Printables
High-efficiency Noctua 92mm fan grill
Just a 92mm version of Noctua's original 120mm fan grill model.
P
Printables
Inexpensive 3mm x 92mm Screwdriver Handle
I did not like the thin handles on the cheap "precision" screwdrivers that you can buy online or that will normally come with 3D printers and other electronic projects. For example, the 3mm x 92mm FOCMKEAS Screwdriver found on the online…
P
Printables
92mm Fan Baffle for modded Meanwell LRS-350 PSU's
UPDATE 04142026: This model was requested by another Printables member for his Prusa MK3s Plus. He also suggested I include an unbranded version so those who either prefer not to provide free advertising for manufacturers or would want to…
P
Printables
CPU fan 92mm to 120mm fan adapter
I have make place to use wire clips for cpu fan and saw that I have didn't had space for ram module. I could make offset or make smaller. I choice to make smaller It fits perfect for me. Category: 3D Printing
P
Printables
Kärcher Hose to 92mm Dust Collector
Adapts from the Kärcher 58mm Hose to any 92mm Hose or Adapter for any Dust collector. Tested with the Scheppach DC100 Dust Collector and a Original Kächer Hose 2m long → Works perfect! Locks tight with the Kärcher rubber ring on the Hose…
P
Printables
Qnap NAS 2x92mm to 100mm Fan Duct
Store your Qnap TS 653d NAS in a tight space and connect fans to an external 100mm pipe
P
Printables
Tukkari 120mm to 92mm adapter (Noctua) (customizable)
I have bought the beautiful Tukkari enclosure and wanted to re-use my existing 92mm Noctua fans from my lack-enclosure. So here is an adapter that fits perfectly to the Tukkari enclosure. You can use some of your 3M screws with a nut to…
P
Printables
92mm PCI-E Fan mount
92mm Fan mount that fits onto the PCI-E area with magnets. Used to cool SSDs sloted in with PCI-E to U.2 adapters, or all other PCI-E cards. Fan used: Noctua NF-A9x14 Magnets used: Neodymium 18x8x4mm For a fan grill, use thing:2802474…
P
Printables
Neptune 4 Pro - PSU Cover 92mm Recessed Mounting
This adds a bit more room under the printer; allows for a better airflow setup or a lower profile setup (92mm slim fan). Moved fan near the connectors. Currently using 40mm feet. 0.2mm height 15% Adaptive Cubic 3 wall loops Outer brim…
P
Printables
PCIE Fan - 92mm Half-Height Bracket for HBA, NIC, GBU, etc.
You might need slightly longer pcie screws depending on your case.
P
Printables
Neptune 3 Plus Bottom Mcu 92mm Fan Cover
Designed for 92mm Younuon fan – hole is 93.6x93.6mm As for mounting holes – there are 2 versions: younuon version vs universal version Also there's a simple version without perforation (with younuon and universal mounting holes as well):
P
Printables
92mm Fan grill
Super simple fan grill for 92mm fans. that is configured by your slicer. Set wall line count to 4 or 5 (for 0.4mm nozzle) Set top and bottom layers to 0. Slow down infill print speed to be the same as your peremeter speeds. Pick your…
P
Printables
Elegoo Neptune 4 Pro PSU Cover 92mm
Remixed Original from OrzOrzOrz to accomodate a larger 92mm fan from Noctua. I did not alter depth but sized fan mounting holes to use M3 x4x4.2mm OD Threaded Inserts. Used a Buck Converter to step down from 24v to 12v If using stock feet…
P
Printables
Noctua NF-A9 92mm Fan
This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.
P
Printables
Fractal Terra CPU Fan Duct 92mm
Reddit post: https://www.reddit.com/r/sffpc/comments/1glr5zc/my_first_sff_builddownsizing_did_i_do_it_right/ The duct is designed for 10mm gap between the cooler and the side panel, which should be in the 4th spine configuration. After…
P
Printables
92mm Monitor Stand Legs
I designed These simple 92mm high legs for a desktop monitor stand. They sit under a 20cm wide shelf. It features 3.5mm screw holes for securing the legs to the top plate. I didn't use the screws holes to keep the shelf complete and used…
P
Printables
92mm radiator fan holder with magnets 6mm x 3mm
This is a simple radiator fan holder designed for a 92mm fan. It features four standoffs with spaces for 6x3mm magnets. The holder is custom-made to fit a radiator with a spacing of 83.50mm between two metal panels on the bottom side.…
P
Printables
Hobut 92mm Panel Meter Blank Plate
Blanking Plate for 92x92mm square cutouts in industrial control panel for panel meters Designed to fit in panels with a skin thickness of 2.6mm Print Settings Rafts: No Supports: Yes Notes: i used some snug supports for the tabs Category:…
P
Printables
1.25mm + 1.92mm offset dremel jig
This piece connects to a dremel with the variable hole cutter attachment (The thing that has a pin that you put into the center of the whole, and then the drill bit / dremel spins around to cut the hole.) I used this to get in the…
P
Printables
drawer handle 92mm hole distance
Simple handle for furniture with 92mm holes distance. Holes are for M4 bolts - screwing directly to the handle.
P
Printables
GMKtec M5 Pro 92mm fan case
The GMKtec M5 Pro (and Plus ) comes with a small 40mm fan on top - it's quite noisy. This top/case allows you to add a 92mm fan instead. You can either have the fan on top, or extend the case and keep the fan inside. I intend to use it…
P
Printables
(Semi-)Parametric 5.25" drive bay adapter for 120mm/92mm/80mm case fan
A fairly straightforward fan mount for a 120mm PC case fan to take the place of 3x 5.25" optical drive bays. You can also Customize it to use a 92mm fan or an 80mm fan (if that's all you have), but there are probably better Things here to…
P
Printables
Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
P
Printables
Asus strix GTX 10 series 92mm fan adaptor
This adaptor ads 12mm to the thickness of the graphicscard and allow to atatch 92mm fans to any asus strix gtx 10 series. There are 2 variants of this model, a thin wall one (1.6mm) and a (2mm). The 1.6mm is for rigid filaments like PLA…
P
Printables
Netzteilabdeckung Neptun 4 plus für 92mm Lüfter / Power supply cover Neptun 4 plus for 92mm fan
Ich habe die Netzteilabdeckung von “edl” (https://www.printables.com/model/763153-power-supply-fan-noise-abatement-ideas-and-a-noctu ) abgeändert, da sie nicht problemlos auf das Netzteil passte, das in meinem Neptun 4 plus verbaut ist…
P
Printables
Qidi Plus 4 Hex Mainboard Cover for 92mm fan with focused ducting
A replacement mainboard cover for the Qidi Plus4 that allows for the use of a 92x25mm fan. I found that 92mm 24V fans were less expensive than 80mm ones so it's a good tradeoff. Here is the specific fan I used…
P
Printables
Minisforum BD770i/BD790i/BD795i 92mm cooler mounting plates
The motherboard comes with 120mm cooler mount, which may not be optimal for some builds. A 92mm cooler is the same width as the radiator. Hardware needed: 6 screws for mounting the brackets to the radiator, they come with the motherboard…
P
Printables
Sliger CX Case 120mm / 92mm Fan Mount
For .f3z: Fusion 360 → Design → Configure Table (on Ribbon bar) → Pick Fan Width Created with M4 screws + nuts for fan to chassis mounting but you can change it to whatever. Had successful prints with: * Brim / brim ears * More than 4…
P
Printables
Voron 0.2 Hinged Backdoor 92mm Fan Hole
I use Sidepanels with openings so the back is closed off for better channeling of the air over the SKR Board. The Remix used also the 92mm Fan Spacer by Greymanx. The Sides are this but with only one side opened, for better air…
P
Printables
92mm Fan Mount with Lockable Ball Joint (Print in Place)
I was asked to create a way to repurpose some old 92mm PC case fans as air circulators for a small indoor greenhouse setup. This frame can be mounted on walls, overhead, or on a shelf and locked in place with a print-in-place ball joint.…
P
Printables
Fanholder for SkyWatcher 8" (200mm) Fansize:92mm
this is a fanholder for the 8" or 200mm skywatcher newtonian telescope. it works for fans with 92mm size you aditionally need: 3 x screw m3 x 12-16mm 4 x screw m3 x 30mm 1 x fan (12vdc) size 92mm the fanscrews are directly screwed in the…
P
Printables
92mm to 80mm fan bracket
92mm to 80mm Fan Conversion Bracket : This 3D model file is designed to adapt a 92mm fan opening to fit an 80mm fan. Crafted with precision, the bracket ensures a secure fit while maintaining optimal airflow. Perfect for retrofitting or…
P
Printables
ZOTAC GTX 1060 Mini 6GB - Dual 92mm Fan Adapter (Remix)
I made a few modifications to the original design to better suit my needs. I removed the rim around the shroud from the original model since it kept hitting other components on my motherboard when trying to install it but I didn't have…
P
Printables
WD My Cloud EX2 Ultra fan cover replacement, noise reduction, 92mm
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 92mm fan. 70mm version and additional details are avaible here: https://www.thingiverse.com/thing:5177184…
P
Printables
Qidi Plus4 80mm/92mm fan vent cover suitable for hanging bin
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
P
Printables
NV-AA1-09 Airflow Amplifier specified for NF-A9X14 92mm Fan
NV-AA1-09 Airflow Amplifier specified for NF-A9X14 92mm Fan, with a custom support and two fixing points with M3 screws
P
Printables
Air grille / Ventilation Grille 198.92mm x 70.57mm x 9.32mm
Air grille / Ventilation Grille 198.92mm x 70.57mm x 9.32mm Additional notes If you like this design, please give me a like and post makes.
P
Printables
Sovol SV08 92mm Mainboard Fan Bracket
I've seen brackets for other sizes of fans to replace the annoyingly loud 40mm stock fan, but none for a 92mm x 15mm fan that I happened to have lying around. I tried to keep the design as clean and simple as possible. Since the fan…
P
Printables
Creality CR-6 SE Motherboard Cover for slim 92mm fan
I haven't printed this yet, but will once I get some quiet 92mm fans and step-down PCBs This is a combination of some already great designs, I can't take credit for anything! Model licence derived on the original designs. Thanks…
P
Printables
92mm Ø cup holder
Cup holder for several cups. Ideal for Ø 90mm cups, possibly a little more but not much. Maybe would produce other diame
P
Printables
Yet another power supply cover for Sovol SV06 or SV06 Plus and 92mm fan
The stock power supply fan on the Sovol SV06 and SV06 Plus is loud and annoying. This is a replacement PSU cover that allows use of a quieter 92mm fan. You will need: 92mm fan 92mm fan grill some M4 threaded inserts some M4 screws for the…
P
Printables
Qidi Plus4 92mm fan vent cover suitable for hanging bin
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
P
Printables
~60mm Grommet to 92mm fan duct adapter
A short grommet to fan duct adapter for my very specific cabinet ventilation needs.
P
Printables
Frame for LED panel P3 64x64pix 192x192mm P3(2121)-32S-192x192-v8.1
Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…
P
Printables
63mm downpipe adapter for 92mm rainwater filter
Filtry do wody deszczowej zakupione na Aliexpress. Wewnętrzna średnica pierścienia to około 92 mm. Adapter łączy rurę spustową rynny o średnicy zewnętrznej 63 mm z filtrem. Opracowałem dwie wersje połączenia filtra z adapterem: Wersja A -…
P
Printables
P1S X1C 92mm Chamber fan Buck Converter Mount
I wanted to use an Artic F9 92mm fan to replace the Noisy Bambu Fan The Artic fan is less noisy than Bambu, has a better static flow than Noctua for the same RPM. It's also the same size, and I don't have to reprint the whole chamber…
P
Printables
92mm Angled Fan Holder for Laser Engraving
A holder to mount a standard 92mm computer fan on to be mounted onto a threaded base plate used by many laser engravers. I personally use it mostly for deep engravings to blow of dust and cool down the part (brass coins) so it doesn't…
P
Printables
ESPHome AirFilter 92mm PC Fan Mount
I designed this mount for Sanders ESPHome Airfilter so I could use a spare 92mm PC fan. Bill of Materials: 4x M4 Heat set inserts (5mm wide, 4mm long) 4x M4x8 Screw to mount Fan
P
Printables
80mm PC Fan to 92mm Mounting Plate / Adapter
This bracket allows you to use an 80mm fan where you would normally use a 92mm one. I needed it to mount an old CPU fan to the back of a case but there are plenty of other uses. You'll need 8 screws; 4 to mount the bracket and 4 to mount…
P
Printables
Fan adapter 80mm to 92mm
Fan adapter 80mm to 92mm thickness : 14 mm Print Settings : Supports: yes Resolution: 0.2 mm Infill: 20% ------ Happy Print to the whole community :)
P
Printables
Simple portable fan (and 92mm Noctua airflow amplifier)
This is a portable, battery powered 12volt 92mm fan such as those commonly found in PCs. Why 92mm specifically? Because it gives a good balance between noise and airflow, and my goal was to create something that gives you the best breeze…
P
Printables
Simple portable fan (and 92mm Noctua airflow amplifier)
This is a portable, battery powered 12volt 92mm fan such as those commonly found in PCs. Why 92mm specifically? Because it gives a good balance between noise and airflow, and my goal was to create something that gives you the best breeze…
P
Printables
92mm fan GPU shroud (x2 or x3)
I made custom GPU shroud for my RX 6800XT Red Devil to replace its stock fans. Because of no free space between this mod and lower lid I cant place any bracket to heatsink, so I just hold fans by cable ties. 3x version consist of 2…
P
Printables
Mini Desk Fan (92mm) (No Screws!)
Easy to print and assemble. (No need for screws.) Can also be used as a solder fume extractor. (Include a frame to attach a filter.) Adjustable angle. Steps to reproduce: Purchase a 92mm fan and a USB 5v to 12v convert cable. Connect the…
P
Printables
Art déco Ender-3 PSU cover | 92mm fan
Parts required 4x m3x25 (or shorter) screws 4x m3 nuts 92mm DC fan optional: step-up/step-down DC-DC module (in case the fan you're about to adapt isn't 12v) Assembly Unplug the printer Unscrew the original cover Remove the original fan…
P
Printables
Fan Adapter 92mm to 120mm
🌀 Fan Adapter 92mm to 120mm This fan adapter is designed to mount a 92 mm fan onto a 120 mm fan position. The adapter is compatible with any 92 mm fan with an 82.5 mm hole spacing . The model includes recesses for M3 heat-set inserts ,…
P
Printables
Fan Mount Adapter for Rigol DHO800 Oscilloscope (92mm Be Quiet! Fan)
The adapter helps improve airflow and device cooling under prolonged use or high ambient temperature. Designed to be installed without modifying the oscilloscope — it uses existing screw points and aligns with the stock vent grid. Fan…
P
Printables
Fan join adapters 60mm, 80mm, 92mm, 120mm, 140mm
Use these adapters to connect multiple PC fans together. Available for fans in the following sizes: 60mm 80mm 92mm 120mm 140mm
P
Printables
10inch 1U Rack Fan Tray for 92mm Fan (Noctua NF-A9 Compatible)
1U 10" Rack Fan Tray for 92mm Fans (Noctua NF-A9 Compatible) This is a custom-designed 1U tray for a 10" server rack. It is sized to fit a standard 92mm fan—specifically designed around the Noctua NF-A9 5V PWM , but it should work with…
P
Printables
Supermicro X10SDV-4C-TLN2F 92mm fan adapter
Simple adapter to mount 92mm fans onto Supermicro X10SDV series. I tested with X10SDV-4C-TLN2F . The adapter can be seen in this video: Supermicro X10SDV with Xeon D-1521 for your home server or NAS .
P
Printables
120mm to 92mm slanted fan adapter for CPU cooler
this adapter can adapt 120mm PC fan to 92mm CPU cooler fan mount. it is optimized for fan mounting clip for CPU cooler. print with material that has glass transition temperature higher than 80 deg c, like PETG, ABS.
P
Printables
92mm fan holder with extra low profile (Noctua NF-A9x14)
This fan holder is originally for a Noctua NF-A9x14 , but other 90x14mm fans might fit aswell. I designed this 92x14mm fan holder to as flat as possible. It is based on the 60mm version is designed. You can mount this holder in different…
P
Printables
Phanteks Shift 2 power switch + 92mm fan holder
I designed a 92mm fal holder for Phanteks Shift 2 to use the top as exhaust. It has 2 piece you can route fan cables inside the RGB unit holder. Other than fan screws no additional screws needed. You can use original screws at exact…
P
Printables
Asus NUC 12 Pro lid with 92mm fan hole
Custom Asus NUC 12 Pro lid for mounting a 92 mm fan on top. print at least with PETg for heat resistance and durability of the clips tested with a 92 mm Noctua NF-A9 fan one clip snapped when I was closing my lid, but it holds securely
P
Printables
Threaded Back for 92mm Fan - #6-32
I need to bolt a 92mm Noctua fan in a tight spot where I don't have access to the back side of the bottom 2 bolts. This part combines all 4 threaded nuts into one piece, so after I screw in the 2 bolts I can access, the other 2 will be…
P
Printables
Thermalright 92mm fan corner chain
This is made to go into the corners of Thermalright's 92mm fans (TL9015), to make multiple fans into a solid unit. I used this to swap the fans on my GPU, as can be seen in the picture, to make everything lower profile, and silent. Yes, I…
P
Printables
92mm Fan adapter for Wind Sim
A modified fan adapter for the Wind Ace simhub wind simulator for 92mm fans for a more compact setup.
P
Printables
Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter FormD Ncase T1
Liteweight remixed version with zero gap between radiator and fan body, 25mm fans support in 3 slot mode, precise strong mount, support Corsair Venegance memory sticks and similar height even with shift brackets for AM5
P
Printables
A4-H2O bottom panel with 92mm fan mount
dont forget to scale model, printed mine in ABS best used with reverse psu mount which is also available I do not consent to the sale of this model or any of its remixes in digital or physical form.
P
Printables
Lab Rax - Top Dual 92mm or 80mm Fan Panel
Alternative Top Panel for your Lab Rax Rack with two 92mm or 80mm fan mounts. Cutout based on the .scad from Customizable honeycomb fan grill by Weltraumpenner. The hexagon pattern perfectly matches the one on the Lab Rax Rack :) Both…
P
Printables
Lab Rax - Top Dual 92mm or 80mm Fan Panel
Alternative Top Panel for your Lab Rax Rack with two 92mm or 80mm fan mounts. Cutout based on the .scad from Customizable honeycomb fan grill by Weltraumpenner. The hexagon pattern perfectly matches the one on the Lab Rax Rack :) Both…
P
Printables
grille nicoll externe de 292mm de long pour fenetre
grille nicoll externe de 292mm de long pour fenêtre à faire en pla ou petg avec buse de 0.4 a mettre en diagonale sur le plateau
P
Printables
Rigol DHO800/900-series Fan Mount (92mm)
Description This is a slim mount for a 92mm fan on the back of your Rigol DHO800/900-series oscilloscope. It reduces the noise compared to the internal fan significantly and even lowers the temperatures by a few degrees. This made a huge…
P
Printables
92mm PC Fan Mounting Bracket
This is an experimental fan mount I'm testing for use in a acetone vapor smoothing bin for ABS/ASA. It's made for the Noctua A9x14 profile although should be compatible with any 92mm standard PC fan model. I printed mine in Filaxix PP-CF…
P
Printables
92mm to 120mm Fan Adapter
Requires M3x12 x 4 to attach the mount to the current standoffs. I purchased a 120mm Noctua fan and used the included rubber pieces to attach it. When I go back and create the 140mm adapter, I will add two additional models here. One that…