92mm Fan Baffle for modded Meanwell LRS-350 PSU's
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sound reducing fan shroud for modified LRS-350 PSU's
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
UPDATE 04142026: This model was requested by another Printables member for his Prusa MK3s Plus. He also suggested I include an unbranded version so those who either prefer not to provide free advertising for manufacturers or would want to apply his/her custom logo. Since I decided to install this duct on one of my Ender 3's I did up a Creality duct, and decided to add a few more with logo's suitable for machines I own that are currently using the LRS-350 PSU. If there's a brand who's logo you'd like on a 92mm fan duct, feel free to message me and I'll add it as well.
I don't yet own a Prusa, but it's been brought to my attention that some Prusa printers in the wild are using the Meanwell LRS-350 24v PSU.
If you own a Prusa machine that has a LRS-350 power supply, and have modified the power supply with a 92mm fan, this duct will redirect airflow to the rear of the machine and hopefully make it run a bit quieter.
As I don't yet own a Prusa, I'm unable to take photo's of this installed.
I print this as oriented in the STL file, with normal supports "to buildplate only". On a machine that's tuned for bridging, it will probably print lovely without supports, however, the supports come off for me pretty easily in a single piece, so I never bothered to chance printing it without supports.
Cipher66 has worked with me on this and currently has it installed on his Prusa MK3s, along with Zcubed's "Mean Well LRS-350 PSU Lids for 92mm Noctua Slim Fan" model available here:
This baffle may work with other setups that are using a 92mm fan. Per Cipher66's request, I've included an unbranded duct for those who don't like manufacturers logo's on their equipment, and for those who wish to apply their own logo's to the baffle before printing.
UPDATE 04122026: I mentioned to Cipher66 that I don't like modeling things I'm unable to test for myself. It was Cipher66 who put Zcubed's "Mean Well LRS-350 PSU Lids for 92mm Noctua Slim Fan" on my radar, and I just so happen to have a machine that would benefit aesthetically from Zcubed's model, so I decided to make use of that work for myself... While I'm much to cheap to spend $19 on a high quality Noctua fan for this mod, I was unable to find any slim 92mm 12v fans aside from the Noctua NF-A9x14 that had ball bearings. Since 25mm fans with ball bearings are all over the place for cheap, I opted to go that route. My first use of this work will be to replace the PSU lid of one of my Ender 3 Pro machines that arrived as a box of broken parts. I ordered that machine from an "UNREPAIRED" seller on EBay for $59 a few years back, and the PSU lid was so beat up, I had to straighten it out on an anvil with a ball peen hammer. It seemed as if that machine was screaming for this upgrade. I've decided to add ducts for all of the manufacturers machines I'm currently using the LRS-350 PSU. Once I get some screw hardware together to install this thing and add updated photos.
The dragon on the Creality branded baffle is from John Cuccia's excellent "Creality Ender 3 QR-Cover with CR-Touch cutout and Improved (imo) Dragon Logo". John Cuccia's design is available here:
One more note: I was going to remix Zcubed's fan mount for the taller 25mm fans and noticed clispios had already done that for me. If you'd like to use Zcubed's PSU cover with a 92mm X 25mm fan, clispios remixed fan mount is linked below: