Liczymy pasujące modele…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
I really liked Silencer \ suppressor \ moderator (lead dust collector) for airgun by Masochisti , but wanted it in one easily printable piece. I don't have any 40mm tube around and printing tubes on their own has given me a bad taste. I…
ZWO Seestar S50 light/dew shield - baffled. This light/dew shield is an interference fit and slides into place. Remember to remove it before shutting down the Seestar. This design has many baffles inside to help reduce light reflections.…
This is suppresor for Artemis SPA PP750. It has the right thread to fit the barrel. I've also done barrel cap replacement and custom K baffles meant directly into PP750 barrel. I've added second type of K-baffle with 8 holes in bottom.…
Insert this baffle into a Donny FL suppressor to make it quieter. I've experimented with several different types of baffles and this is the best one I've found. Mine is for a PCP .22, - but this baffle could certainly be modified or…
This is a library of baffles that can be used with the different generation of Lenovo Tinys with PCIe slots. These are all designs that I have created to fit a bunch of different cards people use with my Fan Shroud and I include for free…
I printed the baffle using Jessie Premium PLA 1.75mm X Brad's Orange Glitter at 15% infill on my MK3s.
Simple tool to help keep the baffle stack aligned when assembling the Rugged Oculus 22 Suppressor. PLA should be fine and I printed with a brim to help with bed adhesion. Then just de-burred the brim area . I used 100% infill with 4…
After using this for a while, it works fine, but I think the shield with baffles is not as useful as I guessed. Even the ‘flat’ plastics are kind of shiny, so really need either paint or felt flocking, so it's probably easiest to make the…
Silencer I designed to work with these baffles https://www.printables.com/model/366130-stackable-airsoft-suppressor-baffle
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
Remix of JGMaker Magic's fan silencer. I removed the center hole, rounded some edges and added an additional baffle. JGMaker's design seems quieter than others I have tried so far. Print "Ender 3 Pro PSU Silencer v2.stl" for the Ender 3…
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
Hello, please make shure to print the duct port first and measure the inside diameter to scale it with your slicer settings! Its made to fit 150mm hoses / 6 inch duct hoses and clamps In the original drawing the insert has a clearance of…
Credit to https://www.printables.com/@nleinad and https://www.printables.com/@QuentinL_4378541 for the originals. Here I have added some sectional threaded baffles. The idea was to have a separate printable section so you could add as…
Baffle/PCIe cover for an I350-T2 dual NIC card for a Lenovo Tiny PC. Made specifically for a Lenovo M720Q, but I think it will fit most of the Tiny series. Prints facing down, no supports needed
T K provided the step file and I was able to adjust the sizing to match the hole insert sizes and positions a little to more exactly match the printer. A print in PLA is now an almost perfect fit (at least with the hatchbox filament I'm…
Nothing special, almost any filament will do. 0.2 layer height, double-sided tape to attach.
Drop in baffle system with airstripper and end cap. This is similar to the style used by Benjamin for over 10yrs. Source a 20mmx30mm spring to place between the airstripper that goes over the end of your barrel and the first cone in the…
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
(Popis v češtině naleznete níže) EN: Otherwise superb model of “Hadley” - astronomical telescope has a baffle that holds only on one rod. To make it sit where it shoud you need to fasten the screw very firmly. This remix fixes the baffle…
This is a very simple light baffle that is meant to be printed in vase mode, and then slid in between the telescope rods, to then snap in place. Print in any flexible-ish filament of your choice, I printed mine in PETG. Can be fitted with…
My previous auxiliary fan shroud/cover/baffle printed in PLA warped inwards due to the heat from the print bed, therefore I had to print a new one. Was looking thru 3Drop and going to print this new fan cover…
I recently got into feeding the local birds and noticed that the seed was disappearing suspiciously quick… I did not want to spend $50 on a squirrel baffle, so I designed and printed one using a $15 roll of PETG! This model consists of 5…
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
I remixed this Light Baffle/Louvre for the circular vents on my grow tents. They allow air to pass, but do not allow light to pass. These work perfectly with ACI tent 6" ports and fit really snug. The screw cap is optional, but helps to…
Commonly people will insert a length of hose into their grow tent air vents and create an S to block light, but this insert will do the same thing acting as a light baffle. This fits very snugly into my AC Infinity Cloudlabs 866 60x60x80…
This is a baffle for the rear PCIe slot of Lenovo Tiny PCs including the M720q and others. The original baffle is from a user on Thingiverse by the name of simbaja and can be found here . I took the original model and tweaked it to my…
Lenovo Thinkcentre tiny series (m720q, m920q, ...) PCIe baffle to attach a 40mm fan to a connected Nvidia Tesla P4 on the internal PCIe riser. To power the fan i used this temperature based speed controller (…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
Rear baffle plate for a 4-port PCI-E NIC, specifically the fenvi 2.5Gbps Intel I226 RJ45 card (https://www.aliexpress.com/item/1005007669305799.html). Please make sure to print in PETG or another heat-resistant polymer as these NIC cards…
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
The original model only claimed a -3dB decrease in noise. Edited the model to introduce some scalloping in the main intake barrel. My original replacement case fan clocked in at a whopping ~70dB at about 2 inches and 60dB at the desk 3…
Made to fit 10mm wide LED strips, use 2x M5 screws and rotating T-nuts to fasten this onto the extrusion. Most of the time I don't even bother with the adhesive on the LED strip, as the 45° angle slot keeps the strip oriented correctly.…
ZWO Seestar S50 baffled light/dew shield for use with 2-inch (M48x0.75) filters. This baffled light/dew shield is an interference fit and slides into place. I've added spring-loaded tangs to help to grip the Seestar. Remember to remove it…
A baffle set for the HW97 front barrel compartment. You can either print the cap and 4 baffles or print the unified piece as a whole. You need a 7'' allen key to unscrew the front cap of the HW97. This is only for 4.5mm/.177 pellet. Print…
Needed to create a baffle for the widely available and inexpensive Dell branded Mellanox ConnectX-4 LX cards that are slightly different in layout than other half height versions I've seen. The card is very secure once the baffle is…
Revised to be stronger. V2 here https://www.printables.com/model/1193245-shop-vac-exhaust-diffuser-baffle-v2 This is perfect for people who are tired of the shop vac exhaust blowing dust and debris everywhere. The exhaust on shop vacs…
Schallwand mit integriertem Waveguide und Fasen für meine Anti.DOT https://www.roul-diy.de/anti_dot/ Druckeinstellungen: – Top / Bottom Layers: 5 – Walls: 4 – Infill: mindestens 40% “Grid” oder “Cubic”
This will make a quiet machine even quieter...
this powder baffle help with the change in pressure inside the powder tank, keeping a constant pressure over the dispensing hole, increasing the precision of the dispensed quantity.
I keep reptiles and needed some kind of baffle / diverter for the fogger tube, so I designed one. :) If you would like to support / throw me a dollar for my design, please feel free to go here and get the design files:…
This piece was made to fit Gravel3170's Squirrel Guard onto a post made from ½" square tubing. Some US big box stores carry shepherd's hook posts made from ½" square tubing. This should be printed from TPU. I used a zip tie to hold it in…
Adjusted with PrusaSlicer, so it may not be pretty, but it just works. -You may need to hold the right side down as you screw in to prevent the print from twisting. -The right screw threads into the print. Refrain from over threading.…
This is a powder baffle for the Hornady LNL AP powder dispenser. It has an adjustable flow feature to tune your powder throws for the different types of powder. Print with at least 2 walls 20-25% infill. Top probably needs 100% infill.…
Remixed the baffle by Grips and made it fit into the stock moderator (.22 700mm barrel). I wrap the baffle in strips of foam from JSB pellet tins. When installing, the pointy end of the funnel inside should point towards the rifle. Drops…
As Mr_Clever_Coyote states in the description of his original design, this reduces, or at the very least, redirects the sound coming from the 60mm fan of many 3D printer PSU's. This part will also improve a 3D printers aesthetics IMO, and…
If you are reversing the air flow in your HF blast cabinet then you can use this to redirect the air down lower in your cabinet. Also works if you are not reversing the flow as it forces the air to be pulled out from a lower location.…
3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!
This is the adapter for the original Dillon case feeder for 9MM that is no longer available from Dillon. It keeps 9MM cases from jamming up in the feed chute. Printed on Prusa MK3S+ Overland PLA Supports required, I used organic supports…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
Same model, just added holes for insertion of 6x2 magnets. Printed in PETG with tree supports. Added a bit of epoxy on the top of the magnet to hold it in place, but probably not needed.
BT60 Bad Ass Fincan I wanted a simple Big Bertha style fin can but also liked the tapered tail of the V2, so I mixed them together to make the BAF! You can print this without supports and the fins are structured to have internal framing…
This is a baffle for the water that flows out of the filter that comes with Aqueon Minibow Aquariums. This one was designed for the Minibow 5-gallon aquarium filter, but I believe it will also work for other sizes that use the same water…
I wanted to drop the water level in my aquarium as low as the hang on back filter (HOB) would allow but that made for a ton of splashing and bubbles and turbulence so I designed this to handle the drop and let the water gently out the…
As Mr_Clever_Coyote states in the description of his original design, this reduces, or at the very least, redirects the sound coming from the 60mm fan of many 3D printer PSU's. This part will also improve a 3D printers aesthetics IMO, and…
I wanted something simple and quick to stop a rodent I had seen climbing my metal bird feeder pole. With only a Prusa Mini bed to use I made this baffle as large as it would allow. The hole is 22.75mm diameter which fits snugly on my pole…
This is a powder baffle for the new lee powder dispensers with the transparent hopper. The baffle fits in to the red hopper cap and is held in by a screw in locking collar. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No…
a low cost way to build a light blocking tube on the 114 hadley telescope 3 rings are included, one with no attachment mechanism, one that simply clips onto an already built hadley, and one that uses the same nut and screw design as the…
A bleed cup for DVO forks that have 22mm hex on top with a baffle to prevent fork oil geyser. Print it with TPU. If yours is a little loose on the fork you can use a zip tie around it, but if your printer prints to size it will be a press…
The included flag was bent for some reason so this was created to avoid replacing a non-print-impacting part. You'll almost certainly want to use black filament for this print since you need to for sure block the IR light in the sensor. I…
English： The picture is an old model I designed before. The current MK02 file is a new model that has fixed many problems. The model file is a scrap collector and a 180mm heightened baffle. You can use A1m to print the whole part [Of…
As Mr_Clever_Coyote states in the description of his original design, this reduces, or at the very least, redirects the sound coming from the 50mm fan of many 3D printer PSU's. This part will also improve a 3D printers aesthetics IMO, and…
Upgraded version. Thicker with reinforcement. First version worked well. This uses more filament but is more resistant to impact and drops. Printed in PLA - 100% infill
This fixes inside a RC10 telescope to reduce stray light photons. This is important for astrophotography and astrometric reductions.
The ‘Daylight on a Stick’ (type ‘extra’) sold by https://www.alchemy3d.de has a different distance between the LEDs than the original ‘Daylight on a Stick’. This model is a remix of the baffle from…
I didn't like the slightly unaligned baffle of darken, so i created my own. The baffle fits a SAS9207-8E HBA and 2,5gbe adapter. I cut the part above the wifiantenna hole to make a better fit. I use the antenna hole to guide the power…
Check the model here: https://a360.co/4noqwko This dust baffle is for the 4040 Pro Max CNC router machine. I printed them in the CR30 so I can print them in a whole piece, but I added a version of the piece divided into two parts, so you…
This filter baffle directs flow to the surface and generates some turbulence - water now flows across the entire aquarium instead of creating a vortex directly below the filter. It also features a grate that forces some water to flow…
Works pretty good quieting my gas Blow back. And reduced some muzzle noise from my Brothers mpx aeg.
This is a reproduction designed from scratch using dimensions from a Ford original floor fresh air vent baffle, specifically for a 1965 Ford Mustang. The part number is C4AB6201820A. I have never found any reproduction for this part, and…
Recently tried larger prints on wider areas of the bed. Discovered the differential cooling effects of the stock parts fan ducting. This is an insert that goes between the stock rear parts fan (on the X crossbar) and the crossbar. Two…
I found the Ender 3 Pro Fan Silencer by Lyl3 and the Skull Face by Vendageek and mashed them up. I also mashed the Skull Face with a QR cover for a matching set of aesthetics. I separated them so I could get a .2 layer height on the Fan…
A remix of the 2 rod baffle that correctly fits a 10x24 imperial nut.
Made for Voron Daylight on a stick XXL (mounted on my RatRig V-Core 4 400) BOM for one led stick supports 2 pieces x M3 threaded insert 2 pieces M3x8 (or M3x6) 2 pieces M6x12 2 pieces M6 T-Nut for 3030 Voron Daylight on a stick support…
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
Item Description: Our LED strip holder is inspired by the Voron Switchwire 3D printer design, and is designed to hold 20 or 25 LEDs per strip for 12mm or 10mm wide LED strips. The holder features a baffle every 5 LEDs to ensure even light…
This is a remix of the nice 3-rod baffle included in Marci's Hadley Telescope M4 Heat Insert Remix , which adds a small cutout at the top so that the Double Dovetail Finderscope Mount can be used as intended.
This is a fall-away dew shield for the SeeStar S50, specifically designed for the soon-to-be-released equatorial mode. It includes an sloped shelf, angled for a specific latitude, so you can flip the shield around 180 degrees, mount it on…
What I made this to fit on the back of a broken Subzero 424 wine fridge that I use as a printer enclosure to reduce sound. The problem with putting a 3D printer in a fridge is all the extra insulation means it's hotter than PLA likes, so…
I designed this louvre vent cover for a 60mm fan, as I needed one to fit on the underside of a vehicle mounted Starlink pod. Can be used for any opening that fits a 60mm cover. Recommend using some mesh to make it critter proof. Designed…
A baffle that fits into the threaded g1/8 hole in your Pioreator's vial cap. A baffle can improve mixing and aeration. The model with holes can provide additional aeration by having a larger surface area with micro air bubbles in it.
This is an adaptation of Eddie the Engineers' LED mounting, which incorporates baffles so that the LEDs are not shinning in your eyes when looking from in front of the printer. Instead of the “bead on a string” approach like the original…
After acquiring my longtime dream astrophotography scope, a 10" Truss Tube RC, I went through the process of making it the imaging beast I knew it could be. After taking care of known issues, like the baffle tube not being long enough, I…
Remixed version of drhollen's ZWO Seestar S50 light/dew shield - baffled that is automatically pushed off if the scope closes while it's fitted. I heated the top of the collar (opposite the push off tab so I could flex it to give a snug…
This is a 10mm thick adapter to fit Polk 5.25" marine-rated speakers to the outdoor baffle enclosures on our RV. I printed this in PETG, and sealed it once mounted with outdoor UV resistant black caulk for both UV protection and to make…
This is a very low profile (8mm tall) fan shroud for power supplies with 60mm fans. When I replaced the power supply on my CTC A10s, I used a meanwell supply with a 60mm cooling fan that made quite a bit of noise. As at the same time, I…
I have been using the cyclonic separator with the MPCNC but: It takes up room in the box and i keep adding more stuff so i had to evict it I also hated that my current mini-shop vac when i used for non CnC stuff would go straight to the…
This is a Thien Baffle Bin Nozzle / 4" Hose Attachment, inspired from this Video: https://youtu.be/h7oWNcIwr7E This 3D print enables you to easily attach a 4" hose to your dust collection system. It was inspired by the Youtube video link…
Pinbot mask baffle to prevent the GI from lighting the mask when not required. Perfect match with this: https://www.thingiverse.com/thing:3594512 Don't forget to say Thanks ;) Category: Toys & Games
Baffles for Vector 3D's Dayspring mini 210mm. Remix from V3D's original one, but full-sized for the V-minion. I use it in combination of my z-axis flat mount:…
Sump baffle clip on attachment for surface skimmer. Category: Pets
Simple yet effective baffles for airsoft version of QD silencer from G&P.
I use 16" Baffle's with my bird feeders. They connect with a "bolt" on" connector that is tightened to a pole. In most cases the included connector is crap and usually cracks the minute you tighten with a screw etc. I designed this…
A simple internally baffled filler neck with a -10 ORB thread in the front to run to your catch can. If you want to try and 3d print this, I have provided a file with the threads modeled so that can happen. But I HIGHLY recommend sending…
NEW version has been uploaded! Pictures to follow. Improvements include taller denser more uniform baffle “spikes”, more rounded tops, more uniform holes, center dome for the “post” to avoid splashing there too. I was getting annoyed by…
Since i was 3d printing this, thought i'd through a cross and He is risen on it. came out well. I used the Heavy Copper font from dafont.com/heavy-copper.font most of the He is risen logos i saw online were a bit feminine, the Gothic feel…
I put some inexpensive LED lights in my front yard that were too bright and too direct for my young and small plants. Pedestrians would complain of the bright lights coming from the yard. I designed and printed some PETG adjustable…
