Super Low Profile Power Supply Fan Baffle for Meanwell Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a low profile (8mm tall) baffle to silence and redirect air from the 60mm fan
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a very low profile (8mm tall) fan shroud for power supplies with 60mm fans. When I replaced the power supply on my CTC A10s, I used a meanwell supply with a 60mm cooling fan that made quite a bit of noise. As at the same time, I was converting my A10s to a stand-alone machine, removing the ugly black box, I needed a shroud that was shallow enough for my bed leveling knobs to clear it. I had already modified and used Mr_Clever_Coyote's “Ender 3 Power Supply Fan Shroud” on my Anet A8 Plus, but that remix was still too tall to clear.