2060 modeli
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu
After I convert my printer to direct drive my extruder cables were touching the Z rods. I don't like cable chains so I need a solution for cable management. The guide has a 90 degrees angle in order to better route the wires and it is…
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
Two versions : Redirects CFS purge (“poop”) to the front of the K2 PRO for easy clean-up. Tight mechanical slack by design; a light sandpaper pass may be needed. Default right-side install; mirror in slicer for left. Thermal & airflow…
UPDATE: I have now uploaded a 1 piece model (combined) as well, which is 230x75.6 so it can be printed on Prusa MK3/MK4. A 1 piece or 2 piece mount for VRS DFP controller box. I have printed the 2 piece edition with PETG on Prusa Mini and…
I found that the STL's Creality provided for mounting the accelerometer packaged with their Creality Sonic Pad would not work with a Micro Swiss NG so created one. With very little area on the NG for a mount to work, I chose to utilize…
Direct mount for SKADIS pegboards to mount the board directly to a wall. (the original mounting is indirect using a metal support) Can also be used to add extra supports in the middle or anywhere you'd like. Can be printed without…
UPFRONT: C6 Core was just released and the link updated! listing is still in screening process and should be accessible from 20.06.26! Core arrived and its a worthy sucessor to the P6 providing an even better less grainy picture with high…
Toolhead to be mounted on every 3D printer with Linear Rails MGN12H mounted on side (not on top of aluminium extrusion). Remix is adapted to use with Orbiter v2.0 extruder and Rapido HF hotend. On images toolhead mounted on Biqu B1 (if…
This is a conversion kit to use the original Anycubic Mega X extruder as a direct drive extruder. You can reuse the extruder and stepper motor. You will neet to unmount the whole stock hotend and fans and also remove the 90 degree angeled…
***************** *** ITALIANO *** ***************** Non è più un problema stampare il TPU con la Super Racer! Ho progettato un nuovo case per trasformare l'Effector da Bowden a DirectDrive e, per l'occasione, ho pensato di installare uno…
i hate documentation, will do later
Materials List: 1 unit Linear Rail L500 MGN12 ( block type C or type H) cheap option 1 : cheap option 2: My recommendation is to use the original Hiwin , more expensive but better quality 1 unit BMG Extruder Right Clone 1 unit V6 Volcano…
I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and was unable to source a replacement so I've finally got round to designing a replacement. I've yet to fully print this (20+…
Modified the Red Squirrel fan duct to fit my needs : adjusted holes diameter to fit M3 screws better made the 5015 fan holding arm and clamp thing beefier to not break when screwed removed the top cable guide added a bltouch mount See the…
Here's a couple of omnidirectional scrapers you can use for removing prints. I've resized them to something a bit more appropriate (i.e. 50% of their original size). Note: I didn't update the renders of them, so they just look large in…
Updated 01.04.24, Revised back plate now Rev2 . Misaligned bolt hole corrected. Budget direct drive extruder, lower cost alternative to the Bondtech LGX Lite. Uses low cost HGX gear sets & 36mm pancake round stepper motor available from…
Hi everyone - here's my proxy model for the Frosthaven Boss, the Program Director! Not too much to write about this one; it needs a fair amount of support because of all of those mechanical hard edges and protruding shapes, but it's…
This is a conversion mount to use the original Anycubic Mega X extruder as a direct drive extruder. You can reuse the extruder and stepper motor. One version has an attached cable chain element (this one needs support), the other version…
2/3/2020: Anchor Firing Gun: Modeled in Fusion 360 after I found some really good refs, I've attached them below. According to the guide books the connector bit is supposed to turn so I put it in there separately in case anyone is really…
This is an mount on the CR-10S 3D Printer, to Mount a Bondtech BMG and a Slice Engenering Mosquito Hotend in a direct drive configuration on the CR-10S, as well as a 40x40mm Fan mount for part cooling Parts are designed in Fustion 360…
UPDATE 2024-04-03: I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts. For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer. Then arrange the printing orientation…
I created this simple direct drive out of frustration with the substandard quality of my Creality Ender 5 plus. This is to be used in conjunction with the new hot end, the “Phaetus Dragon ST. I made it so it fits easily using most of the…
OFRT-8a - Omnidirectional Full-Range Tornado, model 8a, loudspeaker. This loudspeaker features a single full-range driver facing upward, accompanied by two conical-shaped sound reflectors. The driver placement facing upward, ensures that…
I remixed this, took a little plastic off the middle. Slightly enlarged the Heaset holes and added a spot for an inductive prove. the x offset is +43 the y is -13. Printed in Esun ABS+ Category: 3D Printer Parts
Rational I wanted to test 60 degree overhangs in all directions to calibrate the fan speed and print speed for PETG. I wanted a model that would print quick to avoid wasting hours testing multiple settings. So I created this simple “star”…
Automatic Direction Finder (ADF) instrument. Can be used for flight simulator. Can be controlled with MobiFlight. It is compatible to mrusk's Modular Cockpit Material needed: 2 Screws M3x6 2 Screws M3x10 4 Screws M4x10 4 Screws M4x20 1…
All-in-one door wedge for Paramedic
I would always forget which way I had to spin the knob to make an adjustment. Too often I would see a slight error and then go looking for a flashlight so I can see under my bed to read the words on the actual knob, wasting time. I…
This is a Remix of the X Carriage of the BLV MGN Cube from Ben Levi. This X Carriage is designed for the Pheatus Dragon Hotend and the LGX Lite from Bondtech. The Nozzle Cam that I am using is a cheap 5.5mm endoscope camera. The LEDs are…
You can use original screw from the bottom wheel and locknut, though you'll need to hold it with pliers to screw it in. You'll need the original drilling guide to use with this adapter. Do note that bottom right screw ends up drilled with…
For this modification, a Phaetus Rapido Hotend 2 HF ( https://www.phaetus.com/products/rapido2 ) and a Sherpa Mini Extruder are required ( https://github.com/Annex-Engineering/Sherpa_Mini-Extruder ). Additionally, I've installed an SKR…
Bondtech LGX lite or K3D Minifider https://k3d.tech/minifeeder/ Category: 3D Printer Parts
Hi, that's my interpretation of the Re-X-Carriage ... It's a Remix. The following has been adjusted: 1.) Aluminum profile and MGN cars now fit perfectly in the gap 2.) The possibility to install the Duet Filament Monitor has been created.…
Direct Drive base for HMG6 to use Bondtech LGX Lite and Phaetus Dragon (ridgid mount).
Компактный директ экструдер для самосборного принтера Ultimaker 2 с крепление под датчик adxl345 и под хотенд от Bambulab X1 В качестве механизма подачи использованы детали от BMG экструдера
Install these direction-indicating discs on the motors when removing the props to ensure they are always mounted in the correct position. Note: Simply rotate the discs to select the desired CW or CCW direction. Compatibility: Three sizes…
I wanted to create a very loud speaker arrangement using four 3.5" Motran piezoelectric tweeters. This printed waveguide design boosts the sound directivity significantly. The results are super loud & annoying soundwaves, much like the…
Probe offsets -33, -53.5 from the nozzle. Adjust z offset to your liking. Bigger offset from nozzle made to clear the extruder motor in my case, if there is nae a problem for your setup, this might be a sensible choice for you.
STOOPID MAGNETIC EFFECTOR DIRECT DRIVE, with double magnet give more than double stickyness!! ADV ver. give the effector have CANBUS-like capability.... but this system use USB for data transfer... so no hassle to setup in klipper…
just print, i will use brim but idk how it will go for you, may have to sand down some pieces a bit, 15 infill pla I updated the axels and i recommend printing 100% infill for them, you can cut them down to size but you may have to sand…
Hypercube Evolution Direct Drive Hotend *Updated May 5 2025* Highlights: Assembled to “original” 8mm X-axis rods, 45mm spacing Compact direct drive, minimal (if any) volume loss Easier belt assembly and tensioning Neopixel leds for…
Someone in the Virtual Boy Fans Unite group on facebook said his lenses were cracked. I didnt have any extras to send, so within an hour I'd removed the best original lens I had from one of my two working Virtual Boys, and I reverse…
Since a handful of people asked, here is a full-length pusher to replace the original N-strike pusher with a direct plunger compatible replacement. With a handful of parts from Outofdarts.com, the Longstrike can be fully converted to…
UNI 2.3 DirectDrive conversion for Titan extruder (under rail, HBOT, BLK 2.0). https://www.thingiverse.com/thing:4646345 Версия титан директ для боудена Наиля. Для конверсии стокового боудена 2.3. Совместимость: фрезерованная балка нового…
sanding and polishing backing plates that directly mount on any rotary tool added soft versions for fine polishing you may need to scale down the parts about 2-3% in case the fit is too loose
This design is a remix of Juan Callon's really cool belt tensioner design (I remixed so that each belt end has it's own clamp, which may make it a bit easier with tightening and less likely to slip) - mounted onto the BMG V6 MGN12H direct…
I come from a long line of educators, and my aunt currently teaches in a special education preschool. She recently asked me if 3D printing could be used to replace the laminated visual direction cards in her classroom. My answer was yes.…
If U Are Modding Your Logitech It Is For You. Have A Nice Day :)
The fans on the Sole F85 Treadmill are completely worthless. At it's best possible setting half the air blows behind the monitor and the rest over your head (I am 6' tall). These direct the air at my chest where I want it. To use you have…
🧵 BMG V6 ABL Direct Drive Extruder - Dual 4020 Remix Este diseño está pensado para quienes buscan precisión, refrigeración eficiente y facilidad de mantenimiento en su extrusor directo. ✔ Compatible con BMG + V6 ✔ Sistema Direct Drive…
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance.…
This is an omnidirectional vortex, you probably will want to scale it down to 25%
u bought a floppy drive and the eject button is on the opposite side than the case cutout? download this and fix that problem!
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance. The…
Directory of Rubbers for Everything
Custom 3D printable holder designed to replace the original central ventilation grille in the dashboard of a Škoda Felicia . It allows you to integrate a 7-inch touchscreen (Raspberry Pi display) into the center console while maintaining…
universal backing plate, mounts directly on the tool's spindle can be used with sanding pads, polishing pads, felt pads etc
Use M3 x 10 bolts try to use flatter heads on the bolts for easier usage. The Indented version is for my specific hot end that I printed so you may only need it if you have the same one.
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
This is part of the BLV MGN Cube printer. This is necesary if your extruder is Direct Drive, and BMG model. See notes. It was made to align the BMG extruder with the E3Dv6 input. (they were missaligned) Print them in PETG, 90% infill…
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
This model was remixed to accommodate an Eddy Duo inductive sensor as part of a broader retrofit of the CR-10S to a Manta M5P control board. The components shown were printed in PLA+ for prototyping, though the final version of the main…
The Foam Comb (Fomb) is a simple printable tool for picking up nearly any dart type no matter their orientation! No need to aim, simply stab the ground with the Fomb to pick up darts and use the bucket fork to offload! The only…
it directs filament to toolhed and cleans it with sponge or ender 3/v2 (use supports)
The fans on the Sole F85 Treadmill are completely worthless. At it's best possible setting half the air blows behind the monitor and the rest over your head (I am 6' tall). These direct the air at my chest where I want it. To use you have…
I created this project within Orcaslicer because I felt the need and wanted them to improve my project with the K1 extru
This is a remix of @GalvanicGlaze’s Diplo Duct – Ender 3 V2 4020 BMG Direct Drive. I’ve modified the model to better suit my setup: Adjusted the backplate to fit my linear bearing mount for the hotend Modified the extruder mount to work…
This design incorporates patent pending features. The version shown is for illustrative purposes of the key advantage of the Stylus hot end system, the rigid structural mounting of the heater block to a structural elemement of the print…
What if there was a way to tap straight into the core of a power station as versatile as the Anker F3800? To not only extend the runtime of the battery, but to merge with the battery itself - and gain direct access to the full potential…
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
layer high 0.2 infill 45 shell 2 buttom 1 time 15h Category: 3D Printer Extruders
1–4 spool holder system for the Snapmaker U1 direct feed inputs, with optional low-friction rollers. TPU tested down to 70A, including multicolor / multishore prints. Description While testing soft TPU on the Snapmaker U1, I developed…
Original Description: Introducing my latest 3D printing enhancement—a custom-designed direct drive mount for my 3D printer! This meticulously crafted mount seamlessly integrates into my setup, bringing unparalleled precision and…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 25+ Supports: No Print Orientation: Default as modeled Brim: No
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: This design is created for 6,5" hoverboard motor with magnetic encoder. At the beginning wheelbase was build around…
Bracket for mounting extruder motor on moving gantry of the Ender 3 Pro. This braket allows for additional wiring accessories to be routed or zip tied directly to it. There is a gap on the left bottom mount for the additional self…
This adapter kit is used to attach bicycles to Elite Direct Drive trainers. My original adapter was broken, so I replaced it by this one. Compatibility: Elite Direto XR (my trainer) Should be also compatible with: Elite Suito Elite…
Remix for standard deck (42mm) and no mercy deck (64mm) Prints without support
This is an amalgamation/remixes of many files from various creators put together to work with stock motor and hotend for the Ender 5 & Plus. Needs a 5015 part cooling fan. DirectDrive: https://www.thingiverse.com/thing:4710174 Extruder…
I liked the dome shape of DL9HAM's Xiegu G90 speaker redirector, and the elegance that it did not need supports to print, but I wanted something less permanent that could be put on/removed easily. Inspired by this clip-on stand, I used a…
Kobra max OEM direct drive modified from original make to fit the wider tabs on some kobra maxes\ maker sure to check the original make of this remix
This OMG V2-S extruder support is designed for direct drive use on the Mercury One.1 printer. It is designed for use with a nema 14 motor and a sensorless homing system. A .step file is included should you wish to make any adjustments.
Have more fun watching the nuts twist in different directions with the long version. Have even more fun and add the cap and the bolt around as you wish - the nuts won't fall of any more.
This is a system I design that keeps the accessibility of a drop ceiling, but with out loosing the height of the room that a drop ceiling would incur. Essentially, it uses brackets on 4 corners of a ceiling tile to keep the tile on the…
The kusba is mounted with 2 M3x6mm bolts. The holes to mount the kusba are designed to be threaded with the bolt as its being screwed in. I found best results with the simple bed mount were it lying upside down, and putting support…
I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…
3D model description This is just a simple little thread adapter for the DINORODUCTIONS Silencers, it is 14mm CCW to 24mm CW Dimensions: - Length: 15mm - Widest Diameter: 24mm !THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR…
I made it a bit more tidy for a DC Power Jack to be added to the SideKick. There is a notch to secure it to the DDR_Bottom and another notch for wire routing. Enjoy!
a simple way to mount the orriginal stepper motor extruder on the toolhead. can be used with satsana: https://makerworld.com/en/models/13835-satsana-ender-5-and-pro-with-stock-fans-bowden-and?from=search#profileId-14049
XOLcPAP UHF Ducts for direct fitting of the OD 18mm tube.
Direct Drive Conversion Using Stock X Carriage / Back Support Plate This model is a compact and rigid adapter/flange designed to convert Ender 3–style printers that use the stock Extruder Back Support Plate / X Carriage into a…
I needed a slight redesign for my direct drive extruder. Since my stepper design is different, I do not need a relief near the bearing mount. Derived from several excellent designs on thingiverse such as "QU-BD Extruder Modifications…
Direct wall Ender spool holder adapter. Adapter is compatabile with original spool shaft. For countersunk screw D4.5
Replacement directional buttons for Roku tv remote after my dog chewed the original ones out of it.
