Škoda Felicia Dashboard Infotainment Mount & Air Duct Redirection (7" Display)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7" display mount for the Škoda Felicia, replacing the central air vent while retaining the airflow duct.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
Custom 3D printable holder designed to replace the original central ventilation grille in the dashboard of a Škoda Felicia. It allows you to integrate a 7-inch touchscreen (Raspberry Pi display) into the center console while maintaining proper airflow through a custom-designed air duct redirector.
This model was engineered using 3D scanning (EinScan Pro HD), mesh manipulation in VR (Shapelab), and parametric CAD modeling in Autodesk Fusion 360 to match the exact geometry of the original dashboard.
🛠 Features
Direct Fit: Designed using 3D scans of the original Škoda Felicia dashboard for optimal alignment and snap/form-fit placement.
7-Inch Display Integration: Accommodates standard 7" Raspberry Pi touchscreen enclosures with cable routing channels.
Air Duct Redirection: Includes a two-piece internal air funnel system to redirect ventilation airflow away from the back of the screen and into the lower console.
Modular Design: Main bezel and internal air duct components can be printed separately for easier slicing and printing.
🖨 Recommended Print Settings
To ensure heat resistance inside a car interior (especially during summer), do NOT print this in standard PLA.
Material: ABS, ASA, or PETG (ABS/ASA recommended for UV and temperature resistance in cars)
Layer Height: 0.2 mm (or 0.28 mm for faster duct printing)
Walls / Perimeters: 3–4 walls
Infill: 15% – 20% (Gyroid or Cubic recommended for structural rigidity)
Supports: Required only for overhangs on the display bezel and mount tabs.
Orientation: Print the main frame flat on its faceplate to minimize required support structures.
🔧 Assembly & Installation
Carefully remove the original central air vent mesh from your Škoda Felicia dashboard.
Insert the lower air duct redirection module into the air vent opening.
Route the power and display cables (HDMI / Flat Ribbon / USB) through the provided cutouts.
Secure your 7" Raspberry Pi display frame into the main mount assembly.
Press-fit or screw the complete mount into the original dashboard mounting locations.
📂 Included Files
vent_frame.stl/.step– Main front bezel replacing the ventdisplay_backcover.stl/.step– Rear panel for 7" Raspberry Pi displayair_duct_adapter.stl/.step– Internal air funnel/redirectorFull CAD STEP files included for custom community remixes!