WIP - Attack on Titan - 3D Maneuver Gear (Omni Directional Mobility Gear)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2/3/2020: Anchor Firing Gun: Modeled in Fusion 360 after I found some really good refs, I've attached them below.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 2126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
2/3/2020: Anchor Firing Gun:
Modeled in Fusion 360 after I found some really good refs, I've attached them below. According to the guide books the connector bit is supposed to turn so I put it in there separately in case anyone is really motivated.
I don't really know how to render in Fusion 360 but I put one up so you can see some of the extra details on the model.
Scaled to 80 mm wide + connector per the book, however I printed mine at 160 mm because they looked way too small (200%).