Align Trex 550 / 600 - Direct drive tail motor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert the traditional tail of the trex 550 or 600 to a direct drive tail motor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance.
Dimensions:
- 19mm bolt pattern diagonally
Hardware:
- 1x M3 insert
- 4x M3 bolts for motor mount
- 3x M3 bolts for attachment of bracket
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament: PLA or PETG
My setup: I’m planning to run it with ArduPilot. The tail motor is a Hobbywing 3110 900KV paired with a 10" triblade prop and a separate 70A ESC. None of this has been tested yet, so I’m not sure if it’s the perfect setup