Liczymy pasujące modele…
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
This is replacement cover for Parallel I/O (or parallel port) of Sony PlayStation 1. I tried this on model SCPH-550X, but most likely it will be compatible with any model with parallel port (from SCPH-100X to SCPH-750X). Latch is fully…
Storage of 550 parachute cord, 2 slots allow the ends to be secured.
A close friend of mine asked me if I could make him a custom I/O shield for his Asus B550-I Strix itx motherboard to fit with his SSUPD Meshlicious build. This is what I came up with. Use this I/O Shield with ANY case, it just matches the…
Halterung für eine LGB Decoder z.B.: -55020 -55021 -MD-Electronics Drive L -Massoth eMotion L
text from original model on thingiverse and credit goes to: https://www.thingiverse.com/joe9216/designs Remixed a couple of models into one. I could not find a model for the dillon 550 toolhead to mount to the wall that included the shell…
Remix of the 6x3 part, split in two 1x3 parts, added magnet cutouts and modified it to allow printing while stored.
We wanted to use our Apeman C550 dashcam in our new car, so I designed this holder for it. I used thick 3M double sided tape to mount it in the car. Dont use PLA: it will deform in the sunlight. ABS works fine. Support is needed! 2025-09:…
Tray for holding reloading components for the Dillon 550
Easily chip your G scale loco with this mounting device for a LGB 55027 DCC decoder : Screw the holder into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no double-sided adhesive tape or hot glue…
Perfect fit for tattu Rline 4s 550mah
I started with the baseline Sovol Zero LCD Case, and then used @Nadir's model of the MKS IPS50 5" Display (https://www.printables.com/model/1307275-mks-ips50-5-display-sovol-sv08-step-file-mockup) and made them fit together. This provides…
Absolutely awesome work from MartinRowan . I wanted to put my fiber optic modem on a sled. Used the provided blank sled .step file and made this sled. I'm including the first iteration I made and the final iteration. Initial: Full sled,…
Tested with Brother E550W, should work with similar models.
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance.…
Landegestell in Keilform. Hintere Halterung ist etwa 12mm höher als vorne. Dadurch wird die Gefahr mit der Heckfinne beim Landen einzuschlagen verringert. Wedge-shaped landing gear. The rear mount is about 12 mm higher than the front.…
Nachmodellierung des Höhenleitwerks Remodeling the horizontal stabilizer
Thunder Tiger Raptor E550/E620 Riemenscheibe | Pulley PV0379 Die 14mm-Bohrung sollte mit einer Reibahle 14H7 nachgerieben werden. Dadurch passt die Riemenscheibe perfekt auf die Nabe des Sperrlagers. Replica of the original pulley…
Nachmodellierung des Seitenleitwerks / Finne Remodeling the vertical stabilizer / fin
Wanted a place to hide my extra efan and other accessory switches. This piece fits into the sunglass tray in the dash of a s550 Mustang. Drops in sits in place no modification needed other than dropping your own holes in during slicing.…
Modellierung der Heckrohrschelle Modeling the Rear Pipe Clamp
Nachmodellierung der original Grundplatte PV0075 Remodeling of the original PV0075 base plate
Just lengthened the original mount for the tiny trainer battery and made it fit perfectly around the cnhl ministar 550mah battery. Fits really tight and shouldn't eject easily in a crash Edit 6/22/2022: Added file named "TinyTrainerBatt"…
The design is progressing well, having already undergone 250 test flights
Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…
Dimensions of BETAFPV LAVA batteries: 68mm x 6.7mm x 15.5mm. I have also added other variations where batteries are stored in the center, allowing placement in different directions as a way to track whether batteries were used or not.…
DIllon 550 Bullet Tray. Smaller than the original. Can attach directly to InlineFab mounting plate. I didn't want to pay like $85 for a Dillon tray so I just made this. I don't really load too high volume on the RL550C and I have fairly…
Sony double sided NP-F550 dummy for mounting things together (Like a monitor and a wireless reciever)
I purchased a Motion Pro 08-0550 Steering Head Bearing Race Driver Set and wanted a holder to put them in my toolbox, the race adapters snap in place.
Depending on the state of the air adjuster base, you may need to scale the model up or down 1-3% in the X-Y Axis. I adjusted for 1% smaller and the fit was perfect.
Material: PETG (PLA deforms in hot weather) Layer Height: 0.2 mm (0.22–0.24 mm for slightly tighter fit) Infill: 25% Walls: 2–3 perimeters Supports: Yes Orientation: Flat side on bed
This model is compatible with the lego system.
25.4mm tiny whoop mounting pattern. Print in TPU. Mounting hole recess for socket head screw.
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
V1 part, still needs to be tweaked and tested for good fit. I'm working on getting it better setup for not needing supports. Screwless* model now included. The fit is just too tight with screws so I added some stops to hold the drive in…
Hexagonal Battery Case for 5,7,8 450mAh 550mAh Drone Batteries
Purpose: For securely mounting the Valentine V1 Gen 2 radar detector onto the windhsield of S550 Mustangs, without the unreliability of suction cups. I am personally not a fan of suction cups, so I created this. Uses the standard mounting…
Replaces default battery plate to mount downward facing raspberry pi camera module.
This is a throttle tube designed for some mukini carbs on a 76 honda cb550. I printed this out of nylon carbon fiber 100% infill on a x1 carbon. It is used to replace the 2 cable system to a single cable system that the Mikuni carbs use.
A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall. Note: This will not work with the Brother P-Touch E560 which is slightly larger. You need two or four Multibuild Lite Fix Points to attach…
Mount for the rev neo 550 clamps to non dooming bottom allows for clean compact mounting of the rev motor controller
remux of another mount but adapted for my LSW - 550 camera tripod from amazon, fits a 43 x 43mm head, you may need a 1/4 screw (standard camera screw) for the hole i modified it with the built in functions of prusaslicer including…
Knife Block for Cuisinart Knife Set #17550F. Holds 8in Chef, 8in Slicing, 8in Bread, 6in Santoku, 6in Serrated, and 3.5in Paring knives.
Wanted a place to hide my extra efan and other accessory switches. This piece fits into the sunglass tray in the dash of a s550 Mustang. Drops in sits in place no modification needed other than dropping your own holes in during slicing.…
ORGANIZER GT550 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Traced from original plate that i happen to own. Test-fitted.
Print in the orientation of clips flat on the print bed. I've included a step file to allow for easy modifications.
This holder is designed for the neewer np-f battery charger and heavier npf batteries, perfectly fitting the IKEA SKÅDIS pegboard. It securely holds the charger in place, providing easy access and a tidy way to store.
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
Requires 4 M2.5 x 6/8 Screws to attach. I recommend printing in PETG or similar to avoid the plate bending over time due to weight.
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
130mm 100mm 75mm 60mm Stencil for painting/Airbrushing decal Suzuki GS550E (just the GS550E) part ! See photos
After a recent crash where I almost lost my drone because I lost all power I decided to create a strap that actually works to keep the plug secure. There are two versions of the strap. I tested it with the Lava 2 580mah and Tattu R-line…
Dieser kompakte Tag dient zur schnellen und eindeutigen Kennzeichnung von Motorola MTP3550 Funkgeräten. Er wird einfach über die Antenne geschoben und am Clip-Halter fixiert. Ideal für Feuerwehren, Rettungsdienste und Hilfsorganisationen,…
Achtung Akkugröße!! nur für 1950mAh Akkus !!NICHT für 2200mAH Akkus!! Dieses Modell ermöglicht es, das Motorola MTP3550 (und baugleiche Modelle) sicher und griffbereit im Auto zu verstauen. Der Adapter nutzt den vorhandenen Getränkehalter…
I remixed the original to enlarge the opening to hold the toothbrush. Made a little wider as the toothbrush is slightly rounded. Added a square cutout at the back. Added a slight curve to the front to increase the slight added depth.
This is a small drop-in center console tray designed to fit the Lexus GX 550. Depending on your printer you will need to form of supports around the perimeter lip. I have printed several console trays for different experiments. Overall it…
Slightly enlarged version with mounting holes
We wanted to use our Apeman C550 dashcam in our new car, so I designed this holder for it. I used thick 3M double sided tape to mount it in the car. Dont use PLA: it will deform in the sunlight. ABS works fine. Support is needed! 2025-09:…
Hier gibt es einen Einsatz der genau in den SQ14 Rahmen von einer Janome MC550E und kombatiblen Modellen von zum Beispiel Elna passt. Der Stoff wird mit einer Klemmplatte gehalten und nicht überdehnt. In Ober und Unterplatte sind Magnete…
A remix of cudderbup's design over on Thingiverse. I've uploaded different versions / heights to find the best focus for you scanner. I'm using the 0.6 mm Version with ANR glass on top of the negatives. To use it without the ANR glass, a…
Print this out of ASA or ABS. Insert fits the Harbor Freight Apache 550 Cases here: https://www.harborfreight.com/550-weatherproof-clear-case-56378.html Their SKU is: 56378 Use M3 Self-Tapping screws to mount a RAK19007 Baseboard into the…
Protection de batterie pour les BetaFPV Lava 550 3S LiHV utilisées sur lesPAVO20Pro entre autres. Système d'accroche de la prise d'équilibrage inclus !!! A imprimer en TPU, 3 parois, 0.20 layer, nid d'abeille 3d 10% max d'infill pour…
I've had these speakers for maybe 15 years, so don't blame me if it doesn't fit yours. Sorry. The cables can be routed through the hole in the base. The chromecast is mounted below with [this great…
Porsche 550 Spyder 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!
This print allows for one handed operation of EGO Batteries in the CH5500 Rapid Charger (Not the newer Turbo Charger) when the unit is kept on a wirerack. The overall print will support up to EGO 12A Batteries as there is enough clearance…
I couldn't find an efficient gridfinity storage option for NP-F batteries. There are models that hold them flat but this seemed a more efficient use of space. Printed using Bambu ‘draft’ settings works fine.
Added Embossed text so I don't have to use my label maker. Too lazy to do magnum primers since I don't use them. I also realized these aren't really snug on the primer tube. Not a problem since they rest on the steel block and aren't…
Single part with standard RAM ball and tomtom handle on the opposite side
I have a Belkin F6C550-AVR sitting on a wheeled cart. The UPS can fall over sideways sometimes. This is designed to fit the feet of the UPS and has sides to prevent the UPS from tipping over when moved quickly. This was printed in PETG…
Holder for Dillon 550 Caliber Conversion kits. Holds 4 caliber conversion kits & can be mounted to wall, or just set on benchtop. Included a file with DP logo, and one without. Shown printed in Polymaker PA612-CF Category: Tool Holders &…
This allows you to use a 550mm linear rail which is easier to source than the stock 525mm rail.
The design is progressing well, having already undergone 250 test flights
The Global 5500/6500 Airplanes have no clearance between the Flaps and the Lav Service door when open. If the flaps are lowered while the Lav service door is open the flap and door will be damaged. This is why i made this warning that…
Purpose: Caps for sealing/closing off the air intake tube + firewall when the vehicles soundtube is deleted. Main reason for removing this feature of the vehicle is to reduce smells and noise within the cabin. Designed for: S550 Mustang…
XLPower Nimbus Nitro / 550 / 550 V2 Vertical Fin V2 XL55T03-1 Thicker version required longer screw (2.5x10mm + 3x35mm)
XLPower Nimbus 550 Landing Skid The higher version helps raise the Tail Blades
I used extenders for my pins, but you may not have to. Printed in PLA+ 20% Infill No supports
Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…
This safety switch holder can be installed on any one arm of the S500 or S550 quadrotor frame. It works with the screws
Eine angepasste Mikrofonhalterung (auch "Mauserl" genannt) für das Motorola MTP3550. Die Anpassungen habe ich rein im Bambu Studio vorgenommen, also nicht wundern, wenn die STL Dateien nicht hundertprozentig genau geschnitten und…
Přídržný gumový pásek který drží uzávěr (víčko) hrdla nádrže (1K0 201 550) VW group určeno pro Diesel. Doporučený materiál pro tisk - flexi materiál
I consider this a WIP due to how variable my experience with the inkjet print process has been . Please comment with feedback from your experience with the process. Model Info This is designed around standard NFC PVC Cards (54mmx85.5mm).…
XLPower Nimbus 550 Battery Tray First, print the Calibration Test file and ensure that the calibration is correct. Scale - / + if necessary.
This is a case to hold the Jonard wire strippers. The package that comes with it will have a plastic molded base. Keep this and place inside the box. You can use a dab of superglue with the 3mmx3mm magnets to keep them in place.…
Da TGB bei der Blade für vorne keinen Nummernschildhalter vorgesehen hat und ein Mittig angebrachtes Nummernschild die Winde verdeckt, habe ich diesen klappbaren Halter gebastelt. Als Verstärkung für das Nummernschild habe ich auf den…
Dimensions of BETAFPV LAVA batteries: 68mm x 6.7mm x 15.5mm. I have also added other variations where batteries are stored in the center, allowing placement in different directions as a way to track whether batteries were used or not.…
Initial design is for M2 screws, can be quickly modified if needed. No special print instructions.
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Pop Rivet Tool…
A motherboard shroud for the (arguably) ugly gigabyte b550 ud ac atx am4. It does require you to remove your gpu and cpu cooler cables But other than that it is quite simple! I am hoping that this model will help shine some light on what…
Alle 3D Drucke für den Fendt 550 SD AEG Rückfahrkamera Halterung AEG Rückfahrkamera Klemme Apothekerschrank Teile Bodendurchführung Wer noch was braucht kann sich gerne melden
