Dillon 550 Toolhead wall mount with accessories slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally adapted from a Thingiverse model and optimized for strength and fit. Perfect for organizing reload station.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
text from original model on thingiverse and credit goes to:
https://www.thingiverse.com/joe9216/designs
Remixed a couple of models into one. I could not find a model for the dillon 550 toolhead to mount to the wall that included the shell plate and indexing buttons, so i mashed them together. still a work in progress, as the test print is printing now.
UPDATE 3/4/2020
ADDED V3 : I shortened the mount by moving the shell plate holder to the side. I also deepened both the shell plate and the index pin holes. Also included is a mirrored copy of the V3 design for use on the other side of my press.
UPDATE 5/5/2020
ADDED V3 spacer: gives a consistent distance in between mounts.
UPDATE 3/15/22
Added 2 new STL's that adjusted the hole spacing to 2" and 2 with 3" spacing as per requests.