1 / 1
Thunder Tiger Raptor E550/E620 Landegestell | Landing gear — zdjęcie 1

Thunder Tiger Raptor E550/E620 Landegestell | Landing gear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thunder Tiger Raptor E550/E620 Landegestell | Landing gear

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Landegestell in Keilform.

Hintere Halterung ist etwa 12mm höher als vorne.

Dadurch wird die Gefahr mit der Heckfinne beim Landen einzuschlagen verringert.

Wedge-shaped landing gear.

The rear mount is about 12 mm higher than the front.

This reduces the risk of the tail fin striking the ground during landing.

Tagi