Wiznet EVB-Pico2 Case (W6300, W6100, W5500, W5100S)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-fit case for the W6300-EVB-Pico2. Should work for W5100S-EVB-Pico2, W5500-EVB-Pico2 and W6100-EVB-Pico2 aswell.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the board to accommodate small (!) additions inside the case.
The two halves are designed to be easily taken apart when assembled without the board. However, once the board is inserted and the two halves are snapped together, they become reasonably hard to separate again.