Liczymy pasujące modele…
Recommended print settings: Material: PLA or PETG Layer Height: 0.1 mm Infill % : 15+ Supports: No Print Orientation: Default as modeled Raft: No Brim: No Add a color change at layer 3 for contrast in the text.
Wydruk około 0,45 €–0,56 € nettoWstępna wycena jednego wariantu
This a remix and modification of Ric Tru's Remix of yanev's design https://www.printables.com/prints/39729-tool-box-parametric I have reinforced the stubs and expanded the box to fit both flipper, WiFi dev board and some extra room for…
Edit 29.09.2022: I added an improved top cover with integrated buttons (no longer losing those tiny parts!), similar to the Prusa mk3s reset button. Also added holes for LED where the LEDs actually are - the old one had a hole for viewing…
This remix of beebo's designs fits well into Kermit's top half flipper case. It holds the wifi board snugly and has space for the pins so they aren't rubbing up against anything. This cutout was designed for fivesixzero's protective case.…
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
The Flipper Zero WiFi Devboard Case Bumper has been specifically designed to fit on the top of the case design by King and provide added support to keep the two parts securely together.
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.
[EN] This holder has been made to install my BSB-LAN adapter based on OLIMEX ESP32-EVB board inside my gas heater Brötje. But it can be used for any IoT project based on OLIMEX ESP32-EVB (tested with hardware variant K - PCB size 75x75mm)…
A case for the GPIO hardware that is required to use Seader with Flipper Zero. This case is redesigned to fit the original Flipper Zero dev board with the additional hardware. Center the text and the lid in your slicer so they align…
This is a simple 2x2 Gridfinity holder/stand for the EEVblog Brymen BM235 multimeter. It allows you to store the device vertically at a slight angle so you can easily view the display when using it. I might end up tweaking the model a bit…
Its a model wiznet W5500-EVB-Pico
Official KIISU V4B Mockup Devboard (for Case Design) Files include .stl .3mf and .step Don't recommend printing, just use for reference.
Simple case, all ports exposed, there are LED hole inserts for transparent filament. Print and have fun.
its... a lil stolen but... its good like COME ON bro, I WASTED 5 HOLY MOTHERMILKY DAYS FOR THIS. Ehhh... what did i say?
i love the original design of this cutout by coolantmoment , but just too busy to print the case that fit this cutout, like Kermit case. so i decided to make this remix cutout to fit inside the original FLIPPER ZERO Cardboard Box, and now…
Podložka pod baterii elektrokolo, na rám 35mm. Pad under battery holder EVbike on frame 35mm. Distanční podložka mezi rám a držák baterie. Baterie EVBIKE.
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
BOX-ESP32-EVB is plastic box which can be used with both ESP32-EVB with the internal PCB antenna and ESP32-EVB-EA with external antenna.
Saw that 121GW has a little hook at back of case, so decided to make a wall-mounted holder Made in SolidWorks 2017, file attached as always UPDATE: v1.0c, added a chamfer to front faces to make alignment easier
Main board tray and connector shell for TULIP4041 DevBoard. https://www.hpmuseum.org/forum/thread-22013.html https://github.com/mjakuipers/TULIP-DevBoard Printed from PETG with 0.2 mm nozzle.
An HP-41 Stand modified for use with the TULIP4041 DevBoard. Keep your desk tidy with this convenient stand. Provides rear exit for the USB and module connector. Provides a convenient parking spot for the module connector when not in use.…
This project is maintained at https://github.com/hotwolf/DIYLaserBed . If you intend to modify the design, please clone the Git repository, as it will give you the correct directory structure and the required library and assembly…
A bin that holds any development board that has bottom pin headers. Uses a 8x12cm perforated board because I don't trust my printer enough to properly print the generic devboard holder made by thessel . You might need to slightly grind…
This is a collection of cases for the ESP-Hiro smart-home devboard / sensor, actuator and general purpose interface! Please find the full documentation over at the Github page ! If you need one of my things printed or you want to suggest…
I just purchased the Dr.B0rk NRF24 v2 – Generic Devboard and found a design to print out. I printed it and was all wrong. The reason was the one I printed were for v1 and the board I have is RabbitLabs v2. So, I had to design one for me…
Cover for the FZ Wifi Dev board to protect the pins The text says FLIPPER ZERO in Aurebesh (IYKYK)
This model is specifically for hanging a Brymen/EEVBlog BM786 Multimeter. I printed it on a Prusa MK4 with Inland PLA filament at 100% infill. There is no reason to think it won't print really generically on any printer and filament.
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.That being said, I can't think of any reason why anyone would use my humble shell for commercial…
I needed a case for the Olimex Gatemate FPGA dev board that protected the connectors while still allowing for wires to be plugged-in. There are no holes to access any selector or jumper since I never change them, but buttons are still…
.6 nozzle .2 layer height the motor mounts could use a little more room but they work PLA but i would totally try it with hard tpu
I wanted my multimeter off the bench and easily viewable from where I sit at my workdesk. I also wanted to be able to grab it easily if I needed to move it. A shelf was the right height but the angle was wrong for viewing if mounted…
Got tired of having my banana and alligator adapters rolling around everywhere. So I made this. Printed in delicious ProtoPasta High Five Blue to match the meter and be all sparkly. Category: Tool Holders & Boxes
A holder fro a rev battery and a MotoG3. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Inland PLA Category: Robotics
Our friend is a fanatic of measuring equipment so this year for his birthday we decided to make him something special… A set of cookies looking like his favorite multimeter of all time the EEVBlog 121GW! This cookie cutter is 80mm tall,…
I made my own flipper zero devboard insert because the original was a bit loose for me. I made it taking the measures directly from the flipper zero box and the devboard case.
Gridfinity Bin for EEVBlog 121GW Multimeter.
I needed a case for the Olimex Gatemate FPGA dev board that protected the connectors while still allowing for wires to be plugged-in. There are no holes to access any selector or jumper since I never change them, but buttons are still…
I wanted my multimeter off the bench and easily viewable from where I sit at my workdesk. I also wanted to be able to grab it easily if I needed to move it. A shelf was the right height but the angle was wrong for viewing if mounted…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
Original made by ad1k4h on Thingiverse: https://www.thingiverse.com/thing:3768317 NOTE: I'm new to 3D Modeling, and this is my very first 3D Printable Model. This is a cube box for ESP32-EVB board. Buttons are not booled from the top…
I wanted to try out the 10BASE-T1S Ethernet and noticed that I often place my adapter board on conductive parts (i. e. car chassis), which sometimes leads to my network not networking. Thus, I designed a simple snap-fit case for the…
