meshtastic GAT562 Mesh EVB PRO Simple outdoor waterproof
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple waterproof case for GAT562 Mesh EVB PRO
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.That being said, I can't think of any reason why anyone would use my humble shell for commercial purposes。
This is a really simple waterproof case for GAT562 Mesh EVB PRO and it works really well.
Most of the time we don't need buttons. But if you're not sure if you need a button, you can download the cut-out front cover. To keep the front cover of the hole waterproof, you only need to put a waterproof sticker on it
Required hardware:
I'm from China. I'm not sure you can buy the same hardware as I did. So next I will give the maximum size of each part.
1.GAT562 Mesh EVB PRO：Make sure you buy the right frequency. This development board is available in different models.
2.GPS Antenna：28mm*28mm ipex （Choose the shortest antenna feeder length. The distance between the antenna and the IPEX interface is really short）
3.Lora Antenna：22.8mm*52mm ipex （fpc or pcb is fine）
4.Bluetooth Antenna：22.8mm*52mm ipex （fpc or pcb is fine）
5.battery ：26mm*20mm*54mm
6.Magnetic Usb C Adapter
If you can't understand my English, it's all Google Translate's fault.：）