Rabbit Labs DrBork NRF24Dr. v2 Devboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Dr.B0rk NRF24 v2 – Generic Module
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I just purchased the Dr.B0rk NRF24 v2 – Generic Devboard and found a design to print out. I printed it and was all wrong. The reason was the one I printed were for v1 and the board I have is RabbitLabs v2.
So, I had to design one for me from scratch. No hardware needed and is a 2 piece case with tabs that hold the case together.
On both prints, i used Prusa PLA Galaxy Black and Voxel PLA Pro w/ organic supports and Grid at 0.2 layer and 4-perimeters.
REMINDER…THIS IS NOT FOR v1 NRF24 BOARD. ITS FOR THE v2 ONLY. There are other print for v1 but never found any for v2 and why i designed this. Hope you like!! constructive criticism is welcomed as well as LIKES and MAKES.
ENJOY & HAPPY PRINTING!!!!!