Liczymy pasujące modele…
If you've lost or otherwise need a backup to the original puller for your precision pinball flipper, then this 3d printed version will do the trick. This design mimics the original, but requires a matching #6-32 nut to the screw, in order…
Play by yourself or compete with an opponent or play with teams; you make up the rules for your game! Hardware needed: 2 x Neodymium magnets, 5mm x 10mm x 60mm. 1 x steel rod, 3mm diameter x 65mm long. Glue (optional) 4 x Anti-Slip self…
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
A case for the Flipper Zero, using the foam inserts that come with the package. No additional hardware is required, just a bit of filament for the hinge. It also features pockets for 6mm x 2.6mm (usually sold as 3mm) magnets but it'll…
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
This design was made for Canberra Combat Robotics and the starter kit we sell, if you are finding this design yourself you should still be able to make it work with general antweight parts. I have attached the Fusion 360 project file for…
Replacement EOS (End Of Stroke) switch actuator / insulating blade for Williams System 11 pinball machines. This part transfers movement from the flipper plunger to the EOS switch and commonly wears out or breaks over time. Original parts…
Look... It's not great... but it's a start... I'll try to make it better and update here when i do.
This case has an opening in the back to allow space for the pins for when using it without the flipper.
Printed with PLA-CF for toughness and stiffness. Works great with PETG-HF too but more sensitive to impacts.
Commercial Use This Model Is Licensed Under Attribution-NoDerivatives 4.0 International So You Can Sell It But You Have To Credit Me That It's My Model. You Can't Remix Or Edit It! Tested On Sunlu PLA Thanks For Prints! Link To Plastic…
Just a simple modification to a gridfinity bin. 35mm tall bin 93mm tall with flipper usb port points upward for easy charging.
This model was already great, but I wasn’t happy that not all parts were printable. I’ve added fully printable hinge pins and pin caps. They press‑fit securely into each other, but can also be glued for extra strength if desired. I also…
Printed at 0.20 layer, 15% infill, nothing fancy. I did use supports for the top to keep the screw holes clean. Hardware Needed: (4) - M3 Threaded Inserts (4) - M3x6 Hex Head Screws
This is my Flipper Case. There are many like it, but this one is mine. Just a remixed Rugged Tool Box for the bare Flipper Zero in the original box foam. The lid has an insert for the Wi-Fi Dev Board in the Minimalist Case by fivesixzero…
This is a complete remodel of the Flipper Zero case. It uses another type of hinges, as the original ones tended to break off. Its also slightly smaller. It prints with no supports. I used M3x20 screws. It might help to drill the hinges…
To print with two colors with a monocolor printer: You need to add M600 command after the first layer to change filament color. Then add an M600 after de second layer to change with the previous color. Layer thickness: 0.2 mm
A simple case for the Flipper Zero WiFi module with a little cap to avoid folding the pins on it.
Flipper Zero container containing all the accessories needed to use it
Decided I wanted something more robust for carrying after being worried about damaging the card in my pocket. Used the pin protector piece as a base and created walls around that to make more of a wallet, so the original pin protector is…
Very basic stand for a flipper zero, works both with the silicon case and without it. Prints quickly in PLA.
This is a cover for a gps mod that is made by rabbit labs for the flipper zero.
I made this case for using Flipper Zero with CC1101 in my pocket. It has separation from storage for developer board, wires, SD card adapter, cable etc.
If you've lost or otherwise need a backup to the original puller for your precision pinball flipper, then this 3d printed version will do the trick. This design mimics the original, but requires a matching #6-32 nut to the screw, in order…
Flipper Zero NRF24 Case & Window CC1101 Remix for NRF24 Antenna Added space for Antenna Space for module pins
Play by yourself or compete with an opponent or play with teams; you make up the rules for your game! Hardware needed: 2 x Neodymium magnets, 5mm x 10mm x 60mm. 1 x steel rod, 3mm diameter x 65mm long. Glue (optional) 4 x Anti-Slip self…
Additional material: 4x neodynum magnets 6 mm diameter and 3 mm tall 1x medium wire paper clip for hinge
Cases and stand for the Mini Wi-Fi board I designed for the Flipper Zero.
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
Simple pedal flippers for EUCs. I recommend to stick them on with thick 3m double sided tape (the grey kind) It is best to print in PETG, don't forget to print some spares :) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Update 2016-10-21: I revised this to make the hole slightly smaller, as it was too large to fit on the screws from my boxes. I wasn't happy with the prints that I got from using the original STL, so I re-drafted this in OnShape very…
Available also on Makerworld: click Keyflipper Keychain This is a keychain spinner inspired by the keychain ring, but a lot smoother. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress.…
Extra slim and secure fit with tight tolerances and retention clip. Made to fit with the minimalist cover. Can fit bare, but retention clip might not hold it in. Keep your marauder pins safe when in your pocket or bag. source scad…
This was created so we can clean the side of our tanks that are only 50mm apart, but it should also be useful for those with long aquariums, or tanks next to walls. It fits the ¼ inch Flipper Cleaner Float Nano: Amazon AU or Amazon USA…
I store my Flipper Zero with the accessories in a zipper carrying case. As the case is plain black and easily gets mixed up with other similar cases, I wanted to mark the case with a badge.
A simple protective case for the Slim Shady Flipper Zero module, no special settings or supports needed. PETG, ABS. ASA recommended.
This model is compatible with the lego system.
I used extenders for my pins, but you may not have to. Printed in PLA+ 20% Infill No supports
What is it? It's an as-small-as-possible case around the “Kasiin NRF24+ESP32 Multi board v2.6” for the Flipper Zero. Use the pin guard to keep it in your pocket without the pins suffering. Comes with the Fusion 360 file, so you can make…
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
I'm on a cookie cutter making spree. Modeled this after the Flipper Zero hacking swiss army knife. There are two parts to this print, the inside creates an imprint and you don't want to push that all the way through the dough but just…
The popular Flipper Zero case is back with new enhancements—no screws, no threaded inserts, nothing. You need nothing more than to print it and have fun! It's not mandatory, but you can seal the side of the hinge if you wish by melting a…
Carrying case for the flux capacitor with stubby antenna
Für einen Flipper benötigte ich eine Halterung zu den Heschen Spulen HS-0530B. Diese haben 12V 5N und 10mm Hub. Die Löcher zur Befestigung mit M3 sind hier exakt passend. Die Befestigungslöcher am Boden haben 3,5 mm Durchmesser. Die…
3D Scan of a Flipper Zero made with a Creality Scan Raptor. Scanned in 0.15mm resolution. Can be used to design cases or other accessories quite easily.
I love the vacuum extraction on modern tools, but often get bored of constantly having to reattach hoses, so I created this simple switchable duct that allows one of two hoses to be easily selected to the vacuum. The inner sleeve has…
A redesing of https://www.printables.com/model/580541-flipper-zero-wifi-module-case with the Flipper logo.
remix of RJ019 design. @rayj1988 here is the original design creators Youtube video, Excellent channel, give it a look. My changes just make it an all in one plugin device to not have only a wired attachment, requiring the whole flipper…
The Flipper Zero COMBOcase that can fit the flipper zero and WIFI module new enhancements—no screws, no threaded inserts, nothing. You need nothing more than to print it and have fun! It's not mandatory, but you can seal the side of the…
Pin protector for Flipper Zero WiFi Dev board - for specific case, all others didn't fit.
WARNING: THE ANTENA HAS BEEN REPLACED TO THE STOCK ONE THAT CAME WITH THE ESP!!! this is a case made for my small flipper zero case, its made out of an ESP32-C3 and an C1101. the images attached show the board if you want to recreate it.…
1/15/2025 - Added v2 model. Improvements: More secure fit around the wire guide Improved height - this should rest just under the flipper rubber, maximizing the ball surface contact zone without digging into or getting damaged by the…
Material: PLA Layer Height: 0.20 mm Infill Density: 30% Wall Thickness: 1.5 mm Wall line count: 3 Build Plate Adhesion Type: Skirt No supports
I love my case for flipper zero too much and don’t want to buy another one XD so I made this modification, which includes an opening for attaching a carabiner. The modification is not entirely accurate, but it works and this is the most…
for one handed use, snap in piece to suit varying sizes of nailcutter
Small flipper to put some photos on. It took me aprox. 4h to print with .2 mm layers. Axel (Component 2 ) was printed standing with support just like the crank. Orientation for should be the same in the files just like i printed it myself…
This model is compatible with the lego system.
Flipper Model is made for Yeeps Hide and Seek® 's plushie and is meant for skits, YouTube videos, personal use etc. If you make a video on this model, please tag @Nutty.Clxpz on TikTok and @GETOVERIT - Staff on YouTube.
Recommended print settings: Material: PLA or PETG Layer Height: 0.1 mm Infill % : 15+ Supports: No Print Orientation: Default as modeled Raft: No Brim: No Add a color change at layer 3 for contrast in the text.
This is a simple but fairly accurate reference model of the Flipper Zero and its silicone case/sleeve. I made the model for the case, but credit for the simplified Flipper model goes to s0ko1ex.…
For my friend, let me know if you need any changes or want to see how I did this. It's fun and really easy!
Allows users with limited dexterity to cut their own nails. The original model is awesome and is designed for smaller nail clippers (approx 53mmx12mm). Creator was kind enough to provide the link to the OnShape model but alas not in my…
Uses the same top/clips from the original flipper zero case (see what this was remixed from). This case bottom also uses the foam insert that the video game module is shipped in. I had to use a piece of double sided tape to get the thin…
A case for the Flipper Zero, using the foam inserts that come with the package. No additional hardware is required, just a bit of filament for the hinge. It also features pockets for 6mm x 2.6mm (usually sold as 3mm) magnets but it'll…
I wanted a case that nicely fit my flipper. Most of the ones I found just weren't quite right and the dev board wasn't secured to my liking. My wife designed the skull with x's. You can find the silicone sleeve here … The dev board case…
Insert to fit between the Flipper Zero and the silicone case to cover the GPIO pins when not in use.
I kept pulling my Flipper from my pocket and the Pogo Pins would get snagged. This is a cover for the Pogo Pins and fits over each pin and eliminates it getting snagged. You must be using the silicone cover for this to work. I printer in…
1 x CC1101 module (https://aliexpress.ru/item/1005006427856868.html) 1 x 5v to 3.3 (https://aliexpress.ru/item/1005004680123549.html) 3 x 16x2,5 screws
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
small arm bumpers for a Five33 Little Flipper, not super necessary on a design like the Little Flipper but i noticed i was able to knick up the tips of the arms in some crashes and these seem to help without weighing too much. Printed…
Camera mounts for the Five33 Little Flipper for the DJI o4 “lite” camera and the factory mount it comes with. It works with factory screws. I tried and know you can't see any of the camera cage with the 25 deg mount. the higher/lower…
Remix of case made by RJ019 with closed bottom. Two options with sharp and smooth edges. In case there is any upwards wobble that annoys you (might be there depending on how you have built the board) - add some support to the top of the…
Allied Leisure was small maker of pinball machine that was active only during the 70's, releasing only 15 machine. Known for their unique cocktail table style machine, they use unique parts and assemblies that are normally universal on…
A useful tool for alternating household tasks between two people. A lock prevents the slider from accidentally pointing to the wrong person.
Keyflipper! Easy to print! Fast and easy! Requires a 6803 (61803) bearing to function. Answearing all questiona about selling, YES you can sell it, but you need to add Atribbution! (something like “Easy keyflipper by Chrzastek…
please note that the flipper will stick out 20mm on either sides is a remix of Flipper-Zero Dock by Studio_XIII
I store my Flipper Zero with the accessories in a zipper carrying case. As the case is plain black and easily gets mixed up with other similar cases, I wanted to mark the case with a badge. Print Settings Printer Brand: Bambu Lab Printer:…
If you are a Norin the Wary EDH player and love outlandishly fun and completely unnecessary accessories for you EDH decks, then this card flipper is for you! I love playing my Norin EDH deck, but I was bored of repeatedly taking Norin in…
SD card cover for Flipper Zero with the silicone case. V2 is lower to make the cover stay flat and is rounded to the corners. I recommend using ironing to the top surface. Petg, 1.6, 15 infill
English: As I am currently building a pinball machine, I needed appropriate holders for the dual coils, e.g. for Williams/Bally FL-11630, FL-11629 . I couldn't find any here, so I quickly constructed some. I won't install them until…
German: Halterung um eine Frontplatte z.B. Flipper einzuhängen, damit diese klappbar und zu entnehmen ist. Ich habe diese konsturiert, um an meinem Flipperprojekt die Frontplatte zum einen, herauskippbar zu machen, aber auch, um diese…
This is a simple little case to house the Flipper Zero with the Dev Board Pro and GPS expansion pack from JustCallMeKoko. The Case is able to house a Flipper Zero with silicon protective case, and the antenna and the Dev Board Pro with…
Over time, the original steel ball guides near the base of the flippers get flattened and misshapen from repeated ball hits. This ends up causing ball hop as it transitions to the flipper. I've scanned and re-made the ball guides. I made…
I used this spacer with 4" Flipper Fidelity speakers to raise them just a bit to allow the speaker grill to fit better and be flush.
Two versions one that is to cover GPIO pins and spacers and one to cover the GPIO pins only. WIFI Dev Board version is untested as I don't own one.
A friend of mine asked me to print the Flipper Zero - Wi-Fi Dev Board Case by CodyTolene, which looks great. He also asked for a cover for the pins. It wasn't until I finished a pin cover design that I read through the case's description…
I fixed a couple of issues with printing and fitting, so this one should work better for the majority of printers. Print on the right side where the charger hole is located; the model should be vertical to not need supports. I made…
English: Another part for my pinball machine, in this case it is the “switch” for the pinball arms. I only had the plastic button, which is apparently standardized. The plate on which it is mounted is a 15mm multiplex wood plate. I will…
