Flipper Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a folding knife design i have created in OnShape, which flips open and locks. I have designed the knife with a…
- Ocena
- 4,333 / 5
- Polubienia
- 147
- Pobrania
- 602
- Wydruki
- 4
- Wyświetlenia
- 5583
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a folding knife design i have created in OnShape, which flips open and locks.
I have designed the knife with a 0.02 - 0.03 tolerance depending on the spot. if the tolerances are a bit too tight you can just sand down the pins with sandpaper, or scale the model slightly up.
I highly encourage you if you decide to print it out, to post your result when its done. and if you see something i can improve on please post a comment :)
I have added a thicker lockbar (and a handle with a bit deeper groove for the new lockbar) and the option for inserts so that you can add another color in the handle.
Additional Info
Here is how i would recommend you have the parts rotated when printing for the best finished result.
The lockbar is supposed to be superglued in.
Category: Hand Tools